WebOS Internals - User contributions [en]

WebOS Hash Codes

2010-02-27T12:26:15Z

MarkhamDev:

Hash codes (so called because they are prefixed and suffixed with "#" 'hash' characters) are entered into the phone dialer to invoke information displays and behaviors on the phone which can not be reached through menu choices.

The hash codes can be found in the following file: /usr/palm/applications/com.palm.app.phone/app/models/DialStringParser.js

== GSM Pre note ==
The GSM Pre accepts only some of the following codes. You also have to change the preceding double hash '##' to '#*', e.g. ##HELPHELP# becomes #*HELPHELP#.

==Display Information==

*'''##DEBUG# (33284)''' (CMDA only)
:This opens a "Debug Parameters" page that contains technical data on your current signal and tower connection. Signal strength is given as RSSI, which stands for Received Signal Strength Indicator. The closer to zero the RSSI value, the better the signal.

*'''##GPS# (477)''' (CMDA only but there's a [http://gitorious.org/webos-internals/modifications/commit/f14eb152e9bad8eac7fefa4fb1e33e762c1446c2 patch], available in Preware, for that)
:This opens a "GPS Information" page that will give you location, altitude, speed, and accuracy information gathered via GPS.

*'''##HELPHELP# (43574357)'''
:This opens the "Device Information" page.

*'''##RADIO# (72346)'''
:This displays your telephony radio firmware version.

*'''##RTN# (786)''' (CMDA only)
:This opens a "Reverse Logistics Support" page that tells you how many minutes the unit has on it, how much data has transpired, the warranty date, ESN, phone number, software and hardware revisions, refurbished status, etc.

==Collect Logs & Perform Tests==
*'''##8011183#'''
:This application is used to collect logging information from Palm's software running on a webOS device into a single file that caan be emailed to Palm's developers to analyze the reason for an issue.

*'''##5647#'''
:This application is used to collect logging information from Palm's software running on a webOS device into a single file that caan be emailed to Palm's developers to analyze the reason for an issue.

*'''##MONAD# (66623)'''
:This opens a "Monad" page that has a button labeled "CelleBrite Export." The Monad application is used to prepare certain data for export to a Cellebrite device.

*'''##TEST# (8378)'''
:This opens a "Diagnostic Tests" page with options for manual tests and automatic tests.

==Change Settings==
===Safe===
*'''##8327633696#'''
:This enables/disables the "Sticky Dialer" feature. The sticky dialer feature, when enabled, allows the phone app to run in the background. It is enabled by default. When it is disabled, the phone application closes when it is not the "focused" card. This means that if you open the phone app, then go to browse the net, the phone app closes.

*'''##EVDO# (3836)''' (CMDA only)
:This opens a "EVDO Mode" page that controls your phone's EVDO Settings. It gives you the options to force your pre into the following options: 1xRTT only, EVDO Rev 0 only, Hybrid Rev 0, EVDO only, or Hybrid Rev A (meaning pick the best available). Hybrid Rev A is likely to get you the best speed, but if you don't have good reception in your area, you may want to choose something else to conserve battery life.

*'''##SID6581# (7436581)'''
:This enables/disables "Number Masking." Number masking, when enabled, masks all incoming call numbers as to ensure total privacy for the user.

*'''##TTY# (889)'''
:This enables/disables TTY.

*'''##VPON# (8766)''' (CMDA only)
:This enables "Voice privacy."

*'''##VPOFF# (87633)''' (CMDA only)
:This disables "Voice privacy."

===Use Caution (you may disable your phone)===

*'''##AKEY# (2539)''' (CMDA only)
:Allows you to re-enter the 26-digit AKey on CDMA devices. Note: An incorrect AKey will deactivate the phone and you will need to contact technical support for the AKey. MSL is required.

*'''##DATA# (3282)''' (CMDA only)
:This stores all of your Sprint Data login information, including default gateway, etc. I don't recommend changing these settings unless your data services are not working. MSL is required.

*'''##DEMO# (3366)'''
:This allows you to put your phone into "Demo" mode. '''WARNING: Enabling the Palm demo will erase all of your personal settings and enable an instructional demo.'''

*'''##(MSL)# (Whatever your phone's MSL is)''' (CMDA only)
:This allows you to see/change your number. Do NOT change this to a number without notifying Sprint, or your phone will no longer work.

*'''##OFF# (633)'''
:This turns off the phone radio.

*'''##OMADM# (66236)''' (CMDA only)
:Open Mobile Alliance Device Management provisioning. MSL is required.

*'''##PREV# (7738)''' (CMDA only)
:This opens a Mobile Protocol Revision menu. MSL is required.

*'''##USBPASS# (8727277)'''
:Opens 'USB pass through Control' which makes it easier to switch into diag mode. MSL is required.

==Unknown Functionality==

*'''##66338#'''
:ondevlog

*'''##6346843277#'''
:CDTEST- Toggle Experimental Mode.

*'''##2355273667#'''
:PPTEST- Toggle Experimental Mode.

*'''##AUDEQON# (2833766)'''
:Turns on AUDEQ headset.

*'''##AUDEQOFF# (28337633)'''
:Turns off AUDEQ headset.

*'''##FTP# (387)'''
:ftp

'''Research credit to users LarrySteeze and MarkhamDev'''

WebOS Hash Codes

2010-02-27T12:23:43Z

MarkhamDev: /* Unknown Functionality */

Hash codes (so called because they are prefixed and suffixed with "#" 'hash' characters) are entered into the phone dialer to invoke information displays and behaviors on the phone which can not be reached through menu choices.

The hash codes can be found in the following file: /usr/palm/applications/com.palm.app.phone/app/models/DialStringParser.js

== GSM Pre note ==
The GSM Pre accepts only some of the following codes. You also have to change the preceding double hash '##' to '#*', e.g. ##HELPHELP# becomes #*HELPHELP#.

==Display Information==

*'''##DEBUG# (33284)''' (CMDA only)
:This opens a "Debug Parameters" page that contains technical data on your current signal and tower connection. Signal strength is given as RSSI, which stands for Received Signal Strength Indicator. The closer to zero the RSSI value, the better the signal.

*'''##GPS# (477)''' (CMDA only but there's a [http://gitorious.org/webos-internals/modifications/commit/f14eb152e9bad8eac7fefa4fb1e33e762c1446c2 patch], available in Preware, for that)
:This opens a "GPS Information" page that will give you location, altitude, speed, and accuracy information gathered via GPS.

*'''##HELPHELP# (43574357)'''
:This opens the "Device Information" page.

*'''##RADIO# (72346)'''
:This displays your telephony radio firmware version.

*'''##RTN# (786)''' (CMDA only)
:This opens a "Reverse Logistics Support" page that tells you how many minutes the unit has on it, how much data has transpired, the warranty date, ESN, phone number, software and hardware revisions, refurbished status, etc.

==Collect Logs & Perform Tests==
*'''##8011183#'''
:This application is used to collect logging information from Palm's software running on a webOS device into a single file that caan be emailed to Palm's developers to analyze the reason for an issue.

*'''##5647#'''
:This application is used to collect logging information from Palm's software running on a webOS device into a single file that caan be emailed to Palm's developers to analyze the reason for an issue.

*'''##TEST# (8378)'''
:This opens a "Diagnostic Tests" page with options for manual tests and automatic tests.

==Change Settings==
===Safe===
*'''##8327633696#'''
:This enables/disables the "Sticky Dialer" feature. The sticky dialer feature, when enabled, allows the phone app to run in the background. It is enabled by default. When it is disabled, the phone application closes when it is not the "focused" card. This means that if you open the phone app, then go to browse the net, the phone app closes.

*'''##EVDO# (3836)''' (CMDA only)
:This opens a "EVDO Mode" page that controls your phone's EVDO Settings. It gives you the options to force your pre into the following options: 1xRTT only, EVDO Rev 0 only, Hybrid Rev 0, EVDO only, or Hybrid Rev A (meaning pick the best available). Hybrid Rev A is likely to get you the best speed, but if you don't have good reception in your area, you may want to choose something else to conserve battery life.

*'''##SID6581# (7436581)'''
:This enables/disables "Number Masking." Number masking, when enabled, masks all incoming call numbers as to ensure total privacy for the user.

*'''##TTY# (889)'''
:This enables/disables TTY.

*'''##VPON# (8766)''' (CMDA only)
:This enables "Voice privacy."

*'''##VPOFF# (87633)''' (CMDA only)
:This disables "Voice privacy."

===Use Caution (you may disable your phone)===

*'''##AKEY# (2539)''' (CMDA only)
:Allows you to re-enter the 26-digit AKey on CDMA devices. Note: An incorrect AKey will deactivate the phone and you will need to contact technical support for the AKey. MSL is required.

*'''##DATA# (3282)''' (CMDA only)
:This stores all of your Sprint Data login information, including default gateway, etc. I don't recommend changing these settings unless your data services are not working. MSL is required.

*'''##DEMO# (3366)'''
:This allows you to put your phone into "Demo" mode. '''WARNING: Enabling the Palm demo will erase all of your personal settings and enable an instructional demo.'''

*'''##(MSL)# (Whatever your phone's MSL is)''' (CMDA only)
:This allows you to see/change your number. Do NOT change this to a number without notifying Sprint, or your phone will no longer work.

*'''##OFF# (633)'''
:This turns off the phone radio.

*'''##OMADM# (66236)''' (CMDA only)
:Open Mobile Alliance Device Management provisioning. MSL is required.

*'''##PREV# (7738)''' (CMDA only)
:This opens a Mobile Protocol Revision menu. MSL is required.

*'''##USBPASS# (8727277)'''
:Opens 'USB pass through Control' which makes it easier to switch into diag mode. MSL is required.

==Unknown Functionality==

*'''##66338#'''
:ondevlog

*'''##6346843277#'''
:CDTEST- Toggle Experimental Mode.

*'''##2355273667#'''
:PPTEST- Toggle Experimental Mode.

*'''##FTP# (387)'''
:ftp

*'''##AUDEQON# (2833766)'''
:Turns on AUDEQ headset.

*'''##AUDEQOFF# (28337633)'''
:Turns off AUDEQ headset.

'''Research credit to users LarrySteeze and MarkhamDev'''

WebOS Hash Codes

2010-02-27T12:22:42Z

MarkhamDev:

Hash codes (so called because they are prefixed and suffixed with "#" 'hash' characters) are entered into the phone dialer to invoke information displays and behaviors on the phone which can not be reached through menu choices.

The hash codes can be found in the following file: /usr/palm/applications/com.palm.app.phone/app/models/DialStringParser.js

== GSM Pre note ==
The GSM Pre accepts only some of the following codes. You also have to change the preceding double hash '##' to '#*', e.g. ##HELPHELP# becomes #*HELPHELP#.

==Display Information==

*'''##DEBUG# (33284)''' (CMDA only)
:This opens a "Debug Parameters" page that contains technical data on your current signal and tower connection. Signal strength is given as RSSI, which stands for Received Signal Strength Indicator. The closer to zero the RSSI value, the better the signal.

*'''##GPS# (477)''' (CMDA only but there's a [http://gitorious.org/webos-internals/modifications/commit/f14eb152e9bad8eac7fefa4fb1e33e762c1446c2 patch], available in Preware, for that)
:This opens a "GPS Information" page that will give you location, altitude, speed, and accuracy information gathered via GPS.

*'''##HELPHELP# (43574357)'''
:This opens the "Device Information" page.

*'''##RADIO# (72346)'''
:This displays your telephony radio firmware version.

*'''##RTN# (786)''' (CMDA only)
:This opens a "Reverse Logistics Support" page that tells you how many minutes the unit has on it, how much data has transpired, the warranty date, ESN, phone number, software and hardware revisions, refurbished status, etc.

==Collect Logs & Perform Tests==
*'''##8011183#'''
:This application is used to collect logging information from Palm's software running on a webOS device into a single file that caan be emailed to Palm's developers to analyze the reason for an issue.

*'''##5647#'''
:This application is used to collect logging information from Palm's software running on a webOS device into a single file that caan be emailed to Palm's developers to analyze the reason for an issue.

*'''##TEST# (8378)'''
:This opens a "Diagnostic Tests" page with options for manual tests and automatic tests.

==Change Settings==
===Safe===
*'''##8327633696#'''
:This enables/disables the "Sticky Dialer" feature. The sticky dialer feature, when enabled, allows the phone app to run in the background. It is enabled by default. When it is disabled, the phone application closes when it is not the "focused" card. This means that if you open the phone app, then go to browse the net, the phone app closes.

*'''##EVDO# (3836)''' (CMDA only)
:This opens a "EVDO Mode" page that controls your phone's EVDO Settings. It gives you the options to force your pre into the following options: 1xRTT only, EVDO Rev 0 only, Hybrid Rev 0, EVDO only, or Hybrid Rev A (meaning pick the best available). Hybrid Rev A is likely to get you the best speed, but if you don't have good reception in your area, you may want to choose something else to conserve battery life.

*'''##SID6581# (7436581)'''
:This enables/disables "Number Masking." Number masking, when enabled, masks all incoming call numbers as to ensure total privacy for the user.

*'''##TTY# (889)'''
:This enables/disables TTY.

*'''##VPON# (8766)''' (CMDA only)
:This enables "Voice privacy."

*'''##VPOFF# (87633)''' (CMDA only)
:This disables "Voice privacy."

===Use Caution (you may disable your phone)===

*'''##AKEY# (2539)''' (CMDA only)
:Allows you to re-enter the 26-digit AKey on CDMA devices. Note: An incorrect AKey will deactivate the phone and you will need to contact technical support for the AKey. MSL is required.

*'''##DATA# (3282)''' (CMDA only)
:This stores all of your Sprint Data login information, including default gateway, etc. I don't recommend changing these settings unless your data services are not working. MSL is required.

*'''##DEMO# (3366)'''
:This allows you to put your phone into "Demo" mode. '''WARNING: Enabling the Palm demo will erase all of your personal settings and enable an instructional demo.'''

*'''##(MSL)# (Whatever your phone's MSL is)''' (CMDA only)
:This allows you to see/change your number. Do NOT change this to a number without notifying Sprint, or your phone will no longer work.

*'''##OFF# (633)'''
:This turns off the phone radio.

*'''##OMADM# (66236)''' (CMDA only)
:Open Mobile Alliance Device Management provisioning. MSL is required.

*'''##PREV# (7738)''' (CMDA only)
:This opens a Mobile Protocol Revision menu. MSL is required.

*'''##USBPASS# (8727277)'''
:Opens 'USB pass through Control' which makes it easier to switch into diag mode. MSL is required.

==Unknown Functionality==

*'''##66338#'''
:ondevlog

*'''##6346843277#'''
:CDTEST- Toggle Experimental Mode.

*'''##2355273667#'''
:PPTEST- Toggle Experimental Mode.

*'''##FTP# (387)'''
:ftp

'''Research credit to users LarrySteeze and MarkhamDev'''

Talk:WebOS Specific Hash Codes

2010-02-16T04:53:08Z

MarkhamDev: Talk:WebOS Specific Hash Codes moved to Talk:WebOS Hash Codes: Not all of the hash codes listed are WebOS "Specific" therefore the name should be "WebOS Hash Codes" not "WebOS Specific Hash Codes."

#REDIRECT [[Talk:WebOS Hash Codes]]

2010-01-05T06:17:47Z

Pre Specific Hash Codes

2010-01-05T06:17:47Z

MarkhamDev: Pre Specific Hash Codes moved to WebOS Specific Hash Codes: The Hash codes apply to all WebOS phones, not just the Pre. Thus the title should read: "WebOS Specific Hash Codes" as opposed to "Pre Specific Hash Codes."

#REDIRECT [[WebOS Specific Hash Codes]]

2009-12-13T22:16:58Z

MarkhamDev: Changed the Google Image URL to direct to the WebOS formatted version of Google Images

This page is a collection of all the Global Search buttons you can add to the Pre.
If you want to know how to add these to your Pre, follow the '''[[Patch Browser Global Search Addons|Global Search Addons tutorial]]'''.
We are open to requests on the PreCentral forum, but please do not make a new thread—there will be one up shortly.

Disclaimer: Every effort is made to keep these alphabetized, however, we all get dyslexic from time to time. Please point out any discrepancies, problems or concerns to SirataXero and/or Virox on the PreCentral forums. Thanks, and enjoy!

<div style="background:#dde8ee;border:#6799b4 2px dashed;margin-bottom:5em;margin-left:2em;margin-top:3em;margin-right:3em;padding-bottom:.5em;padding-left:1.5em;padding-right:1.5em;padding-top:.5em">

'''[http://www.amazon.com/ Amazon]:'''

[[image:search_amazon2.png]]

[[image:search_amazon.png]]

<code><nowiki>http://www.amazon.com/s/ref=nb_ss_gw?url=search-alias%3Daps&field-keywords=</nowiki></code>

'' confirmed by [http://forums.precentral.net/showthread.php?p=1674770&posted=1#post1674763 huytrang90]''

'' Note: You need to delete the existing search-amazon CSS class, or your Amazon logo won't center properly.''

'''[http://www.answers.com/ Answers]:'''

[[image:30sa7v8.png]]

<code><nowiki>http://www.answers.com/topic/</nowiki></code>

'''[http://www.biblegateway.com/ BibleGateway]:'''

[[image:search_biblegateway2.png]]

[[image:search_biblegateway.png]]

<code><nowiki>
Mobile: http://mobile.biblegateway.com/quicksearch/index.php?quicksearch=
Regular: http://www.biblegateway.com/quicksearch/?quicksearch=
</nowiki></code>
^^* confirmed by [http://forums.precentral.net/showthread.php?p=1674770&posted=1#post1674763 huytrang90]^^

'''[http://www.citizendium.org/ Citizendium]:'''

[[image:96dr48.png]]

<code><nowiki>http://en.citizendium.org/wiki/Special%3ASearch?search=</nowiki></code>

'''[http://www.craigslist.org/ Craig's List]:'''

[[image:search_craigs.png]]

<code><nowiki>http://[PLACENAME].craigslist.org/search/?areaID=[CHANGEME]&subAreaID=[METOO]&catAbbreviation=sss&query=</nowiki></code>

NOTE: Please replace the main hyperlink (PLACENAME), areaID (CHANGEME) and the subAreaID (METOO) to your respective location. For example: search craigs list in your location for something: A search for "Spiderman" at Providence, RI gives this url:
<code><nowiki>http://providence.craigslist.org/search/?areaID=38&subAreaID=&query=spiderman&catAbbreviation=sss</nowiki></code>
This shows that the main link is providence (PLACENAME), and the areaID (CHANGEME) is 38. However, the subAreaID is blank. Your location may or may not have a subAreaID. If it does, just include it between the equal sign and the ampersand (...=IDNUMBER&...).

'''[http://www.deviantart.com/ deviantART]:'''

[[image:search_deviantART.png]]

<code><nowiki>http://browse.deviantart.com/#order=9&q=</nowiki></code>

'''[http://www.ebay.com/ ebay]:'''

[[image:search_ebay2.png]]

[[image:search_ebay.png]]

<code><nowiki>http://shop.ebay.com/?_from=R40&_trksid=p3907.m38.l1313&_nkw=</nowiki></code>

'''[http://www.facebook.com/ Facebook]:'''

[[image:search_facebook2.png]]

[[image:search_facebook.png]]

<code><nowiki>http://www.facebook.com/s.php?init=q&q=</nowiki></code>

'''[http://www.flickr.com/ Flickr]:'''

[[image:3662056807_4b47401f02_o.png]]

<code><nowiki>http://www.flickr.com/search/?q=</nowiki></code>

'''[http://www.google.com/mobile/gmail/ Gmail Mobile]'''

[[image:b3sdcp.png]]

<code><nowiki>http://mail.google.com/mail/x/?s=q&q=</nowiki></code>

NOTE: You must have previously logged into the Gmail website on your Pre and selected 'Remember Me' (to save the cookie) for this to work.

'''[http://www.google.com/ Google]:'''

[[image:searchgoogle.png]]

[[image:search_google2.png]]

<code><nowiki>http://google.com/search?q=</nowiki></code>

'''[http://books.google.com/ Google Books]:'''

[[image:search_googlebooks2.png]]

[[image:search_googlebooks.png]]

<code><nowiki>http://books.google.com/books?q=</nowiki></code>

'''[http://images.google.com/ Google Images]:'''

[[image:search_googleimages2.png]]

[[image:26278d4.png]]

[[image:keswgz.png]]

<code><nowiki>http://images.google.com/m/search?client=ms-palm-webOS&channel=iss&q=</nowiki></code>

'''[http://maps.google.com/ Google Maps]:'''

[[image:search_googlemaps2.png]]

[[image:3vm2c.png]]

<code><nowiki>http://maps.google.com/maps?f=q&source=s_q&hl=en&geocode=&q=</nowiki></code>

'''[http://news.google.com/ Google News]:'''

[[image:search_googlenews2.png]]

[[image:search_googlenews.png]]

<code><nowiki>http://news.google.com/nwshp?q=</nowiki></code>

'''[http://www.imdb.com/ IMDb]:'''

[[image:search_IMDb2.png]]

[[image:search_IMDb.png]]

[[image:2ldehso.png]]

<code><nowiki>http://www.imdb.com/find?s=all&q=</nowiki></code>
^^* confirmed by [http://forums.precentral.net/showthread.php?p=1674770&posted=1#post1674763 huytrang90]^^

'''[http://www.last.fm/ Last.fm]:'''

[[image:search_lastfm2.png]]

[[image:search_lastfm.png]]

<code><nowiki>http://www.last.fm/search?m=all&q=</nowiki></code>

'''[http://www.mahalo.com/ Mahalo]:'''

[[image:mahalo.png]]

<code><nowiki>http://www.mahalo.com/search/?q=</nowiki></code>

'''[http://www.merriam-webster.com/ Merriam-Webster]:'''

[[image:search_merriamwebster.png]]

<code><nowiki>http://www.merriam-webster.com/dictionary/</nowiki></code>

'''[http://www.netflix.com/ Netflix]:'''

[[image:search_netflix.png]]

<code><nowiki>http://www.netflix.com/Search?v1=</nowiki></code>

'''[http://net.bible.org/ NETBible]'''

<code><nowiki>net.bible.org/search.php?search=</nowiki></code>

'''[http://m.precentral.net/ PreCentral.net Mobile Forums]:'''

[[image:Precentral-logo.png]]

<code><nowiki>http://m.precentral.net/search/</nowiki></code>

'''[http://www.radioreference.com/ RadioReference]:'''

[[image:search_radioreference2.png]]

[[image:search_radioreference.png]]

<code><nowiki>http://www.radioreference.com/apps/Search/?cx=014732645207632841850%3Afkjydvmuoq4&q=</nowiki></code>

'''[http://www.reddit.com/ Reddit]:'''

[[image:2wlyi6o.png]]

<code><nowiki>http://www.reddit.com/search?q=</nowiki></code>

'''[http://www.rottentomatoes.com/ Rotten Tomatoes]:'''

[[image:searchrottentomatoes.png]]

<code><nowiki>http://www.rottentomatoes.com/search/full_search.php?search=</nowiki></code>

'''[http://www.twitter.com/ Twitter]:'''

[[image:search_twitter3.png]]

[[image:search_twitter2.png]]

<code><nowiki>http://search.twitter.com/search?q=</nowiki></code>

'''[http://en.wikipedia.org/ Wikipedia]:'''

[[image:search_wikipedia3.png]]

[[image:search_wikipedia2.png]]

<code><nowiki>Mobile: http://en.m.wikipedia.org/wiki/Special:Search/
Regular (Default): http://en.wikipedia.org/wiki/Special:Search/</nowiki></code>

'''[http://www.wolframalpha.com/ Wolfram Alpha]:'''

[[image:2cfxevt.png]]

[[image:searchwolf.png]]

<code><nowiki>http://www.wolframalpha.com/input/?i=</nowiki></code>

'''[http://www.yahoo.com/ Yahoo!]:'''

[[image:searchyahoopurple.png]]

[[image:searchyahoo.png]]

<code><nowiki>http://new.m.yahoo.com/w/onesearch?p=</nowiki></code>

'''[http://www.yelp.com/ yelp]:'''

[[image:yelplogoresizecolorn.png]]

[[image:yelplogoresizex.png]]

<code><nowiki>http://www.yelp.com/search?find_loc=$CITY+NAME%2C+$STATE&find_desc=</nowiki></code>

NOTE: Replace $CITY+NAME (eg., Santa+Monica) and $STATE (eg., CA) to hardcode your search location. In the future it would be nice to make this location-aware.
Example: http://www.yelp.com/search?find_loc=Santa+Monica%2C+CA&find_desc=

</div>
Please point out any discrepancies, problems or concerns to SirataXero and/or Virox on the PreCentral forums. Thanks, and enjoy!