WebOS Internals - User contributions [en]

Portal:Patches to webOS

2011-08-22T23:48:16Z

Rboatright: add patch portal

__notoc__
{{box | color = #fee | style = margin-bottom: 2em | 1 =
<div style='font-size: 1.3em'>'''This page is out of date. '''</div>
The community of people who create and edit patches have been forum based for a long time instead of being wiki-based and the maintenance of this page has fell behind at about webOS version 1.3. Since the Pre- is running 1.4.5 and later devices are running webOS 2.x and 3.x, the patches, and their operation and installation described on these pages are no longer accurate.

Additionally, with the introduction of webOS 2 and 3, many of the things which were patchable in 1.x became hard coded in binary files, and those patches became impossible to produce. Other patches became moot as their functionality was subsumed into the operating system.

== Discussions on patches and patch development==
To obtain information on the current state of the world of patches for webOS, please visit the official patch forums at [http://forums.precentral.net/webos-patches/ http://forums.precentral.net/webos-patches/].

== Listings of Patches which are available by OS version and subject==
To browse available patches, sorted by OS Version and their application and suitability, visit the '''Official Patch Portal''' at [http://patches.webos-internals.org/ http://patches.webos-internals.org/].

It is as yet undetermined if this page will be held as a historical document of the condition of the system in 2010, or updated. Until then, regard all this information as unreliable.
}}

{{portal-header
|If you need info on how to properly update webOS, see [[Portal:Updating webOS Versions|Updating webOS Versions]].

'''<nowiki>***THIS PAGE IS OUT OF DATE, PLEASE HELP IN REORGANIZING IT***</nowiki>'''

'''A more updated list of patches, descriptions, and discussion links is here: [http://forums.precentral.net/webos-patches/206807-official-patch-discussion.html Official Patch Discussion]'''

This page lists patches to webOS existing apps which modify the behavior as shipped. '''Note''' that these patches may be version specific and may be broken by future webOS updates. Proceed with caution. If you get one that works please move it under the correct column, alphabetically, and title the page:
'''"Patch [application] [description]"''' (for application specific patches) <br>
'''"Patch webOS [description]"''' (for patches not part of a specific application)<br>

Each page should contain at least the basic headings
*1. '''Introduction''': A brief description to introduce people to the patch.
**1.1 '''Usage''':An explanation if it is needed on how to use the modification see Add/Delete Pages in the Launcher as an example.
*2. '''Editing Process''': Step by step instructions to manually edit.
*3. '''Patching Process''': Details for making the edits with a patch file and pointing people to the [[Applying Patches]] page if the patch is also provided in the webos-internals gitorious repository.

For patches that aren't listed here you'll also want to check out the gitorious repository at http://gitorious.org/webos-internals/modifications/trees/master

Please refer to '''[[MIT_Open_Source_License_-_webOS-Patches| MIT Open Source License - webOS-Patches]]''' for important information regarding patches and licensing.
}}

{{portal-three-columns
|column1=
===webOS Update Information===
* [[Update 1.3.5|Update 1.3.5]]
* [[Update 1.3.1|Update 1.3.1]]
* [[Update 1.2.1|Update 1.2.1]]
* [[Update 1.2.0|Update 1.2]]
* [[Update 1.1.0|Update 1.1]]
* [[Update 1.0.4|Update 1.0.4]]
* [[Update 1.0.3|Update 1.0.3]]

===Patches that Need Work===
* [[Bugs]]

|column2=
===Patch Ideas to be Created or in Progress===

* [[More_Calculator_Functions|Accessing additional built-in calculator functions]]
* [[Add_Ability_To_Choose_Snooze_Length|Add Ability to Choose Snooze Length]]
* [[Add_Icon_To_Quick_Launcher|Add an icon to the quick launcher]]
* [[Changing Clipboard Data From The Shell|Changing Clipboard Data from the Shell]]
* [[Development_%26_Tweak_Ideas | Development & Tweaking Ideas]]
* [[Longer Vibrate|Longer Vibrate]]
* Text Search feature in browser (analogous to Ctrl+F in Windows)
* [[Assign_SMS_Tone_Directly_To_Contact|Assign SMS Tone Directly To Contact]]

|column3=
===Notes===
These modifications lack a patch process, please add one to the details to the page and have it added to the webOS-internals gitorious repository. Info for the repository is on [[Applying Patches]].

*Empty
}}
{{portal-three-columns
|column1=
==Current Patches==
===webOS 1.3.1 OK===
* [[Patch Calendar Notification Repeat|Calendar: Notification Repeat]]
* [[Patch Calendar Snooze Duration Selection|Calendar: Snooze Duration Selection]]
* [[Patch Clock Add space between Snooze and Dismiss buttons|Clock: Add space between Snooze and Dismiss buttons]]
* ++[[Patch Contacts Send All via Email|Contacts: Send All via Email]]
* ++[[Patch Enable LED Notifications|Enable LED Notifications]]
* ++[[Patch_Email_Change_Default_Font_for_Replies-Forwards_from_Navy_to_Black|Email: Change default font on replies/forwards from dark blue to black]]
* [[Patch Email DeleteAll|Email: Delete All Read All]]
* [[Patch Email DeleteFromNotificationBar|Email: Delete from notification bar]]
* [[Patch Email Notification Repeat|Email: Notification Repeat]]
* [[Patch Change Carrier String|Change Carrier String]]
* [[Patch Launcher Wrap Pages|Launcher: Wrap Pages]]
* [[Patch Launcher Reset Scroll on Page Change|Launcher: Reset Scroll on Page Change]]
* [[Patch Launcher Reset to First Page|Launcher: Reset to First Page]]
* [[Patch Launcher Reset to Middle Page|Launcher: Reset to Middle Page]]
* [[Patch Messaging Notification Repeat|Messaging: Notification Repeat]]
* [[Patch Phone Notification Repeat|Phone: Notification Repeat]]
* [[Patch webOS Browser: Show All Bookmarks (Not just first 12)]]
* [[Patch webOS Roam Control|Roam Control]]
* [[Patch webOS BypassPINLock]]
===webOS 1.2.1 OK===
* ++[[Patch Browser Global Search Addons|Browser: Global Search Addons]]
* [[Patch Browser Delete Individual History Items|Browser: Delete Individual History Items]]
* [[Patch Calendar Notification Repeat|Calendar: Notification Repeat]]
* [[Patch Calendar Snooze Duration Selection|Calendar: Snooze Duration Selection]]
* [[Patch Clock Add space between Snooze and Dismiss buttons|Clock: Add space between Snooze and Dismiss buttons]]
* [[Patch Clock Enabling the Hidden Theme|Clock: Enabling the Hidden Theme]]
* ++[[Patch Clock Change Alarm Button Order|Clock: Change Alarm Button Order]]
* ++[[Patch Clock Change Alarm Snooze Length|Clock: Change Alarm Snooze Length]]
* [[Patch Camera Easy Shutter Sound Off|Camera: Easy Shutter Sound Off]] - Called: Sound Toggle - Green (and Grey)
** also [[Patch Camera Shutter Sound On-Off Button|Camera: Shutter Sound On-Off Button]]
** also [[Camera Mod Alternate Sound Disable]]
* [[Patch Camera Using Volume Buttons to Take a Picture|Camera: Using Volume Buttons to Take a Picture]]
* [[Patch Email Confirm Deletion|Email: Confirm Deletion]]
* [[Patch Email Change Default Font for Replies-Forwards from Navy to Black|Email: Change Default Font for Replies/Forwards from Navy to Black]]
* [[Patch Email DeleteAll|Email: Delete All Read All]]
* [[Patch Email DeleteFromNotificationBar|Email: Delete from notification bar]]
* [[Patch Email Enable Landscape Viewing|Email: Enable Landscape Viewing]]
* [[Patch Email Notification Repeat|Email: Notification Repeat]]
* [[Patch Launcher Add or Delete Pages|Launcher: Add/Delete Pages]]
* [[Patch Launcher Hide-Delete The NASCAR App|Launcher: Hide/Delete The NASCAR App]]
* ++[[Patch Launcher Hide Media Sync Option|Launcher: Hide Media Sync Option]]
* [[Patch Launcher Unhide the DeveloperMode App|Launcher: Unhide the DeveloperMode App]]
* [[Patch Launcher To Allow More Icons Per Row|Launcher: Allows More Icons Per Row]]
* [[Patch Launcher Wrap Pages|Launcher: Wrap Pages]]
* [[Myavatar In Messaging App|Messaging: Avatar In Messaging App]]
* [[Patch Messaging Character Counter|Messaging: Character Counter]]
* [[Patch Messaging Display Full Status Messages|Messaging: Display Full Status Messages]]
* [[Patch Messaging Change "Enter Key" To Create Newline|Messaging: Change "Enter Key" To Create Newline]]
* [[Patch Messaging Force Offline Send Without Dialog|Messaging: Force Offline Send Without Dialog]]
* [[Patch Messaging Forward Messages|Messaging: Forward Messages]]
* [[Patch Messaging Jump Forward, Backward One Word at a Time|Messaging: Jump Forward, Backward One Word at a Time]]
* [[Patch Messaging Landscape Orientation|Messaging: Landscape Orientation]]
* [[Patch Messaging New Cards For Each Conversation|Messaging: New Cards For Each Conversation]]
* [[Patch Messaging Adding Timestamps to All Received Messages|Messaging: Adding Timestamps to All Received Messages]] - Three Options: Builtin, Clean, and Fancy
* [[Patch Messaging Notification Repeat|Messaging: Notification Repeat]]
* [[Patch Messaging Sounds|Messaging: Message Sound]] - Called SMS Tone Per Contact
* ++[[Patch MediaPlayer Ignore 'A', 'An', and 'The' In Artist and Album names|Music Player: Ignore 'A', 'An', and 'The' in Artist and Album Names]]
* [[Patch PDF Viewer Change Orientation|PDF Viewer: Change Orientation]]
* [[Patch Phone Show Call Duration in the Call Log|Phone: Show Call Duration in the Call Log]]
* [[Patch Phone Disable Various Call Sounds|Phone: Disable Various Call Sounds]]
* [[Patch Phone Notification Repeat|Phone: Notification Repeat]]
* [[Patch Tasks Always Show Details of New Tasks|Tasks: Always Show Details of New Tasks]]
* ++[[Patch Youtube Landscape Orientation|Youtube: Landscape Orientation]]

===webOS Patches===
* [[Patch Enable LED Notifications|Enable LED Notifications]]
* [[On Screen Keyboard]]
* [[Patch webOS Brightness|Brightness]]
* [[Change_the_default_notification.wav_Sound|Change the Default notification.wav Sound]] - use SMS Tone Per Contact
** Also [[Changes_Alert/Notification_Sounds|Changes Alert/Notification Sounds]]
* [[Patch webOS Changing the "Turn off after X" time|Changing the "Turn off after X" Time]]
* [[Patch webOS Disable Charging Event Sounds|Disable Charging Event Sounds]]
* [[Patch webOS Workaround for Touchstone Charging Event Problem|Workaround for Touchstone Charging Event Problem]]
* [[Patch webOS Add Words to AutoCorrect Dictionary|Modify AutoCorrect Dictionary]]
* [[Patch webOS Radio Power Switch|Radio Power Switch]]
* [[Patch webOS Roam Control|Roam Control]]
* [[Patch webOS Show Actual Battery Percentage | Show Actual Battery Percentage]]
* [[Patch webOS Turning Off Dialpad Noise|Turning Off Dialpad Noise]]
* [[Uber Calendar]] - Enhance calendar views and add week number

|column2=

==Previous Patches==
===webOS 1.2 OK===
++ Indicates needs to be added to the git repository. Please help add them and remove the notation when added.
* ++[[Patch Phone Edit Dialer Theme|Phone: Edit Dialer Theme]]
* [[Patch MediaPlayer Bookmarking|Music Player: Bookmarking]] only works in 1.2.1 podcast, speech, spoken word, netcast, or audiobook genres

===Fixed in 1.2 - No longer needed===
* [[Patch Amazon Download Music over EVDO|Amazon: Download Music over EVDO]]
* [[Patch Browser Downloading Files|Browser: Downloading Files]]

===webOS 1.1 OK===
* [[Patch Calendar Show All-Day Events in Month View|Calendar: Show All-Day Events in Month View]]
* ++[[Patch Camera 10 Second Countdown Timer|Camera: 10 Second Countdown Timer]]
* ++[[Patch Email Change "Running Late" Message|Email: Change "Running Late" Message]]
* ++[[Patch MCraig Enabling Personals Category|mCraig: Enabling Personals Category]]
* ++[[Patch Phone Editing the Lock Screen|Phone: Editing the Lock Screen]]
* ++[[Patch WebOS Bypassing Lock Screen|Unlock: Bypass the Passcode Entry Screen]]

===Fixed in 1.1 - No longer needed===
* [[Patch Email Fix Broken Formatting|Email: Fix Broken Formatting for E-mails]]

===Not 1.1 compatible===
* [[Patch Camera Remote View|Camera: Remote View]]
* [[Patch Email Fix Attachments|Email: Fix Attachments]]
* [[Patch Sudoku Disable Zooming|Sudoku: Disable Zooming]]

===webOS 1.1 OK===
++ Indicates needs to be added to the git repository. Please help add them and remove the notation when added.
* ++[[Patch webOS Boot Themes|Boot Themes]]
* ++[[Patch webOS Bypassing Activation|Bypassing Activation]]
* ++[[Patch webOS CPU Frequency or Voltage Scaling|CPU Frequency or Voltage Scaling]]
* ++[[Patch webOS GPS Tracking|GPS Tracking]]
* ++[[Patch webOS Graphics|Graphics]]
* ++[[Patch webOS Hourly Chime|Hourly Chime]]
* ++[[Patch webOS Keep Phone Awake While in Remote Session|Keep Phone Awake While in Remote Session]]
* [[Patch webOS Logging Information from Within Scripts|Logging Information from Within Scripts]]
* [[Patch webOS Modifying a Stock App While Keeping the Original|Modifying a Stock App While Keeping the Original]]
* ++[[Patch webOS Random Wallpaper Switching|Random Wallpaper Switching]]
* [[Patch webOS Reverse Tunnel|Reverse Tunnel]]
* [[Screenlock On When Connected|Stay On While Connected]]
* [[Make USB Partition Writable via SFTP|Make USB Partition writable via SFTP]]

===Fixed in 1.1 - No longer needed===
* Empty

===Not 1.1 compatible===
* [[Patch webOS Email App Patch to Prompt for IPK Installation|Email App Patch to Prompt for IPK Installation]]

|column3=
==== The following have not been checked for compatibility with webOS 1.1. ====
* [[Browser_Plugins|Browser Plugins]]
* [[Photos Slideshow|Photos Slideshow]]

==== The following are deprecated. They have been replaced with methods which are easier or are moot in 1.1 ====

* [[Installing Homebrew Apps With A Rooted Pre|Installing Homebrew Apps With A Linux Accessed Pre]]
* [[Packaging Homebrew Apps for Stock Pre without Rooting|Packaging Homebrew Apps for Stock Pre without Accessing Linux]]
* [[Modifying Stock Applications|Modifying Stock Applications]]

}}

Portal:Patches to webOS

2011-08-22T23:41:01Z

Rboatright: warning - out of date -

__notoc__
{{box | color = #fee | style = margin-bottom: 2em | 1 =
<div style='font-size: 1.3em'>'''This page is out of date. '''</div>
The community of people who create and edit patches have been forum based for a long time instead of being wiki-based and the maintenance of this page has fell behind at about webOS version 1.3. Since the Pre- is running 1.4.5 and later devices are running webOS 2.x and 3.x, the patches, and their operation and installation described on these pages are no longer accurate.

Additionally, with the introduction of webOS 2 and 3, many of the things which were patchable in 1.x became hard coded in binary files, and those patches became impossible to produce. Other patches became moot as their functionality was subsumed into the operating system.

To obtain information on the current state of the world of patches for webOS, please visit the official patch thread at [http://forums.precentral.net/webos-patches/206807-official-patch-discussion.html http://forums.precentral.net/webos-patches/206807-official-patch-discussion.html].

It is as yet undetermined if this page will be held as a historical document of the condition of the system in 2010, or updated. Until then, regard all this information as unreliable.
}}

{{portal-header
|If you need info on how to properly update webOS, see [[Portal:Updating webOS Versions|Updating webOS Versions]].

'''<nowiki>***THIS PAGE IS OUT OF DATE, PLEASE HELP IN REORGANIZING IT***</nowiki>'''

'''A more updated list of patches, descriptions, and discussion links is here: [http://forums.precentral.net/webos-patches/206807-official-patch-discussion.html Official Patch Discussion]'''

This page lists patches to webOS existing apps which modify the behavior as shipped. '''Note''' that these patches may be version specific and may be broken by future webOS updates. Proceed with caution. If you get one that works please move it under the correct column, alphabetically, and title the page:
'''"Patch [application] [description]"''' (for application specific patches) <br>
'''"Patch webOS [description]"''' (for patches not part of a specific application)<br>

Each page should contain at least the basic headings
*1. '''Introduction''': A brief description to introduce people to the patch.
**1.1 '''Usage''':An explanation if it is needed on how to use the modification see Add/Delete Pages in the Launcher as an example.
*2. '''Editing Process''': Step by step instructions to manually edit.
*3. '''Patching Process''': Details for making the edits with a patch file and pointing people to the [[Applying Patches]] page if the patch is also provided in the webos-internals gitorious repository.

For patches that aren't listed here you'll also want to check out the gitorious repository at http://gitorious.org/webos-internals/modifications/trees/master

Please refer to '''[[MIT_Open_Source_License_-_webOS-Patches| MIT Open Source License - webOS-Patches]]''' for important information regarding patches and licensing.
}}

{{portal-three-columns
|column1=
===webOS Update Information===
* [[Update 1.3.5|Update 1.3.5]]
* [[Update 1.3.1|Update 1.3.1]]
* [[Update 1.2.1|Update 1.2.1]]
* [[Update 1.2.0|Update 1.2]]
* [[Update 1.1.0|Update 1.1]]
* [[Update 1.0.4|Update 1.0.4]]
* [[Update 1.0.3|Update 1.0.3]]

===Patches that Need Work===
* [[Bugs]]

|column2=
===Patch Ideas to be Created or in Progress===

* [[More_Calculator_Functions|Accessing additional built-in calculator functions]]
* [[Add_Ability_To_Choose_Snooze_Length|Add Ability to Choose Snooze Length]]
* [[Add_Icon_To_Quick_Launcher|Add an icon to the quick launcher]]
* [[Changing Clipboard Data From The Shell|Changing Clipboard Data from the Shell]]
* [[Development_%26_Tweak_Ideas | Development & Tweaking Ideas]]
* [[Longer Vibrate|Longer Vibrate]]
* Text Search feature in browser (analogous to Ctrl+F in Windows)
* [[Assign_SMS_Tone_Directly_To_Contact|Assign SMS Tone Directly To Contact]]

|column3=
===Notes===
These modifications lack a patch process, please add one to the details to the page and have it added to the webOS-internals gitorious repository. Info for the repository is on [[Applying Patches]].

*Empty
}}
{{portal-three-columns
|column1=
==Current Patches==
===webOS 1.3.1 OK===
* [[Patch Calendar Notification Repeat|Calendar: Notification Repeat]]
* [[Patch Calendar Snooze Duration Selection|Calendar: Snooze Duration Selection]]
* [[Patch Clock Add space between Snooze and Dismiss buttons|Clock: Add space between Snooze and Dismiss buttons]]
* ++[[Patch Contacts Send All via Email|Contacts: Send All via Email]]
* ++[[Patch Enable LED Notifications|Enable LED Notifications]]
* ++[[Patch_Email_Change_Default_Font_for_Replies-Forwards_from_Navy_to_Black|Email: Change default font on replies/forwards from dark blue to black]]
* [[Patch Email DeleteAll|Email: Delete All Read All]]
* [[Patch Email DeleteFromNotificationBar|Email: Delete from notification bar]]
* [[Patch Email Notification Repeat|Email: Notification Repeat]]
* [[Patch Change Carrier String|Change Carrier String]]
* [[Patch Launcher Wrap Pages|Launcher: Wrap Pages]]
* [[Patch Launcher Reset Scroll on Page Change|Launcher: Reset Scroll on Page Change]]
* [[Patch Launcher Reset to First Page|Launcher: Reset to First Page]]
* [[Patch Launcher Reset to Middle Page|Launcher: Reset to Middle Page]]
* [[Patch Messaging Notification Repeat|Messaging: Notification Repeat]]
* [[Patch Phone Notification Repeat|Phone: Notification Repeat]]
* [[Patch webOS Browser: Show All Bookmarks (Not just first 12)]]
* [[Patch webOS Roam Control|Roam Control]]
* [[Patch webOS BypassPINLock]]
===webOS 1.2.1 OK===
* ++[[Patch Browser Global Search Addons|Browser: Global Search Addons]]
* [[Patch Browser Delete Individual History Items|Browser: Delete Individual History Items]]
* [[Patch Calendar Notification Repeat|Calendar: Notification Repeat]]
* [[Patch Calendar Snooze Duration Selection|Calendar: Snooze Duration Selection]]
* [[Patch Clock Add space between Snooze and Dismiss buttons|Clock: Add space between Snooze and Dismiss buttons]]
* [[Patch Clock Enabling the Hidden Theme|Clock: Enabling the Hidden Theme]]
* ++[[Patch Clock Change Alarm Button Order|Clock: Change Alarm Button Order]]
* ++[[Patch Clock Change Alarm Snooze Length|Clock: Change Alarm Snooze Length]]
* [[Patch Camera Easy Shutter Sound Off|Camera: Easy Shutter Sound Off]] - Called: Sound Toggle - Green (and Grey)
** also [[Patch Camera Shutter Sound On-Off Button|Camera: Shutter Sound On-Off Button]]
** also [[Camera Mod Alternate Sound Disable]]
* [[Patch Camera Using Volume Buttons to Take a Picture|Camera: Using Volume Buttons to Take a Picture]]
* [[Patch Email Confirm Deletion|Email: Confirm Deletion]]
* [[Patch Email Change Default Font for Replies-Forwards from Navy to Black|Email: Change Default Font for Replies/Forwards from Navy to Black]]
* [[Patch Email DeleteAll|Email: Delete All Read All]]
* [[Patch Email DeleteFromNotificationBar|Email: Delete from notification bar]]
* [[Patch Email Enable Landscape Viewing|Email: Enable Landscape Viewing]]
* [[Patch Email Notification Repeat|Email: Notification Repeat]]
* [[Patch Launcher Add or Delete Pages|Launcher: Add/Delete Pages]]
* [[Patch Launcher Hide-Delete The NASCAR App|Launcher: Hide/Delete The NASCAR App]]
* ++[[Patch Launcher Hide Media Sync Option|Launcher: Hide Media Sync Option]]
* [[Patch Launcher Unhide the DeveloperMode App|Launcher: Unhide the DeveloperMode App]]
* [[Patch Launcher To Allow More Icons Per Row|Launcher: Allows More Icons Per Row]]
* [[Patch Launcher Wrap Pages|Launcher: Wrap Pages]]
* [[Myavatar In Messaging App|Messaging: Avatar In Messaging App]]
* [[Patch Messaging Character Counter|Messaging: Character Counter]]
* [[Patch Messaging Display Full Status Messages|Messaging: Display Full Status Messages]]
* [[Patch Messaging Change "Enter Key" To Create Newline|Messaging: Change "Enter Key" To Create Newline]]
* [[Patch Messaging Force Offline Send Without Dialog|Messaging: Force Offline Send Without Dialog]]
* [[Patch Messaging Forward Messages|Messaging: Forward Messages]]
* [[Patch Messaging Jump Forward, Backward One Word at a Time|Messaging: Jump Forward, Backward One Word at a Time]]
* [[Patch Messaging Landscape Orientation|Messaging: Landscape Orientation]]
* [[Patch Messaging New Cards For Each Conversation|Messaging: New Cards For Each Conversation]]
* [[Patch Messaging Adding Timestamps to All Received Messages|Messaging: Adding Timestamps to All Received Messages]] - Three Options: Builtin, Clean, and Fancy
* [[Patch Messaging Notification Repeat|Messaging: Notification Repeat]]
* [[Patch Messaging Sounds|Messaging: Message Sound]] - Called SMS Tone Per Contact
* ++[[Patch MediaPlayer Ignore 'A', 'An', and 'The' In Artist and Album names|Music Player: Ignore 'A', 'An', and 'The' in Artist and Album Names]]
* [[Patch PDF Viewer Change Orientation|PDF Viewer: Change Orientation]]
* [[Patch Phone Show Call Duration in the Call Log|Phone: Show Call Duration in the Call Log]]
* [[Patch Phone Disable Various Call Sounds|Phone: Disable Various Call Sounds]]
* [[Patch Phone Notification Repeat|Phone: Notification Repeat]]
* [[Patch Tasks Always Show Details of New Tasks|Tasks: Always Show Details of New Tasks]]
* ++[[Patch Youtube Landscape Orientation|Youtube: Landscape Orientation]]

===webOS Patches===
* [[Patch Enable LED Notifications|Enable LED Notifications]]
* [[On Screen Keyboard]]
* [[Patch webOS Brightness|Brightness]]
* [[Change_the_default_notification.wav_Sound|Change the Default notification.wav Sound]] - use SMS Tone Per Contact
** Also [[Changes_Alert/Notification_Sounds|Changes Alert/Notification Sounds]]
* [[Patch webOS Changing the "Turn off after X" time|Changing the "Turn off after X" Time]]
* [[Patch webOS Disable Charging Event Sounds|Disable Charging Event Sounds]]
* [[Patch webOS Workaround for Touchstone Charging Event Problem|Workaround for Touchstone Charging Event Problem]]
* [[Patch webOS Add Words to AutoCorrect Dictionary|Modify AutoCorrect Dictionary]]
* [[Patch webOS Radio Power Switch|Radio Power Switch]]
* [[Patch webOS Roam Control|Roam Control]]
* [[Patch webOS Show Actual Battery Percentage | Show Actual Battery Percentage]]
* [[Patch webOS Turning Off Dialpad Noise|Turning Off Dialpad Noise]]
* [[Uber Calendar]] - Enhance calendar views and add week number

|column2=

==Previous Patches==
===webOS 1.2 OK===
++ Indicates needs to be added to the git repository. Please help add them and remove the notation when added.
* ++[[Patch Phone Edit Dialer Theme|Phone: Edit Dialer Theme]]
* [[Patch MediaPlayer Bookmarking|Music Player: Bookmarking]] only works in 1.2.1 podcast, speech, spoken word, netcast, or audiobook genres

===Fixed in 1.2 - No longer needed===
* [[Patch Amazon Download Music over EVDO|Amazon: Download Music over EVDO]]
* [[Patch Browser Downloading Files|Browser: Downloading Files]]

===webOS 1.1 OK===
* [[Patch Calendar Show All-Day Events in Month View|Calendar: Show All-Day Events in Month View]]
* ++[[Patch Camera 10 Second Countdown Timer|Camera: 10 Second Countdown Timer]]
* ++[[Patch Email Change "Running Late" Message|Email: Change "Running Late" Message]]
* ++[[Patch MCraig Enabling Personals Category|mCraig: Enabling Personals Category]]
* ++[[Patch Phone Editing the Lock Screen|Phone: Editing the Lock Screen]]
* ++[[Patch WebOS Bypassing Lock Screen|Unlock: Bypass the Passcode Entry Screen]]

===Fixed in 1.1 - No longer needed===
* [[Patch Email Fix Broken Formatting|Email: Fix Broken Formatting for E-mails]]

===Not 1.1 compatible===
* [[Patch Camera Remote View|Camera: Remote View]]
* [[Patch Email Fix Attachments|Email: Fix Attachments]]
* [[Patch Sudoku Disable Zooming|Sudoku: Disable Zooming]]

===webOS 1.1 OK===
++ Indicates needs to be added to the git repository. Please help add them and remove the notation when added.
* ++[[Patch webOS Boot Themes|Boot Themes]]
* ++[[Patch webOS Bypassing Activation|Bypassing Activation]]
* ++[[Patch webOS CPU Frequency or Voltage Scaling|CPU Frequency or Voltage Scaling]]
* ++[[Patch webOS GPS Tracking|GPS Tracking]]
* ++[[Patch webOS Graphics|Graphics]]
* ++[[Patch webOS Hourly Chime|Hourly Chime]]
* ++[[Patch webOS Keep Phone Awake While in Remote Session|Keep Phone Awake While in Remote Session]]
* [[Patch webOS Logging Information from Within Scripts|Logging Information from Within Scripts]]
* [[Patch webOS Modifying a Stock App While Keeping the Original|Modifying a Stock App While Keeping the Original]]
* ++[[Patch webOS Random Wallpaper Switching|Random Wallpaper Switching]]
* [[Patch webOS Reverse Tunnel|Reverse Tunnel]]
* [[Screenlock On When Connected|Stay On While Connected]]
* [[Make USB Partition Writable via SFTP|Make USB Partition writable via SFTP]]

===Fixed in 1.1 - No longer needed===
* Empty

===Not 1.1 compatible===
* [[Patch webOS Email App Patch to Prompt for IPK Installation|Email App Patch to Prompt for IPK Installation]]

|column3=
==== The following have not been checked for compatibility with webOS 1.1. ====
* [[Browser_Plugins|Browser Plugins]]
* [[Photos Slideshow|Photos Slideshow]]

==== The following are deprecated. They have been replaced with methods which are easier or are moot in 1.1 ====

* [[Installing Homebrew Apps With A Rooted Pre|Installing Homebrew Apps With A Linux Accessed Pre]]
* [[Packaging Homebrew Apps for Stock Pre without Rooting|Packaging Homebrew Apps for Stock Pre without Accessing Linux]]
* [[Modifying Stock Applications|Modifying Stock Applications]]

}}

Bootie

2011-08-22T23:31:47Z

Rboatright: edit for grammer and clarity

'''Current Version''': 191.4 introduced with WebOS 1.4.1 <BR>
Old version : 145.2.6 introduced with WebOS 1.0.3

Bootie is the stage3 bootloader of webOS devices. It is unpacked from the end of boot.bin, and loaded to **0x82000000** in memory. Bootie looks very similar to iBoot from the iPhoneOS devices.

Getting into bootie mode is as easy as holding the volume-up key while plugging the phone into USB while the phone is in the "off" state. The novaterm/novaproxy programs can then be used to talk to bootie.

== Running Bootie commands ==

The following is an example of using novaterm to run the bootie command "help":

<pre><nowiki>
] help
command list:
nduid : get the device id
usb : usb transfer commands
lboot : boot linux image
klog : klog commands
printenv : print all of the environment variables
getenv : read an environment variable
setenv : set an environment variable
reset : reset the device
script : run a script at specified address
run : run a script at from an environment variable
return : return from current script
help : this list
version : get bootie version
battery : battery status (found in webOS 1.4.1 and not in 1.0.3)
charging : commands to set charging states
fsboot : boot current image based on environment
chainboot : boot another bootloader image based on environment
go : Jump to a given address with the given arguments
cpurev : read the cpu revision (found in webOS 1.0.3 but not in 1.4.1)
diag : perform diag operations: write, boot, verify
poweroff : power off completely
</nowiki></pre>

== The Bootie Environment ==

===The default environment of Pre phones during boot follows:===

<pre><nowiki>
] getenv
T ? = 0
T chargebypass = 0
T framebuffer = 0x8f600000
T boardtype = castle-dvt3
installer = trenchcoat
T klog_len = 0x100000
T klog_addr = 0x8ff00000
T logofile = boot/logo.tga
T bootaddress = 0x81000000
T bootfile = uImage
T bootfs = ext2
T bootdevice = mmc0p1
T bootargs-ramdisk = root=/dev/ram0 ramdisk=32768 ro
T bootargs = root=b302 rootdelay=2 ro
T bootconsole = tty1
autoboot = fsboot
</nowiki></pre>

===The boot environment on a TouchPad (3.0.2) follows:===

<pre><nowiki>
T ? = -1000
T framebuffer = 0x7f600000
installer = trenchcoat
checkbatt = 1
T chargebypass = 1
T klog_len = 0x100000
T klog_addr = 0x7ff00000
T tablet_wod_support = 0x0
T extended_timeout = 0x0
T chainbootdevice = mmc0
T bootaddress = 0x41000000
T bootdevice = mmc0p12
T bootfile = uImage
T bootfs = ext2
T bootargs-ramdisk = root=/dev/ram0 rw
T bootargs = root=/dev/mmcblk0p13 rootwait ro
T bootconsole = ttyS0,115200n8
T autoboot = fsboot
T boardtype = topaz-Wifi-pvt
</nowiki></pre>

== Additional commands ==

In addition to the commands listed by the ''help'' command displayed above, bootie supports the command ''get'' which will return the contents of a file, for example:

<pre><nowiki>
novacom get file://klog
</nowiki></pre>

Changing keyboard layout on Touchpad

2011-08-22T23:22:41Z

Rboatright: grammer and clarification

Virtual keyboard layouts in Touchpad are hardcoded into LunaSysMgr binary, therefore editing the keyboard layouts requires a ''binary patch'' to the LunaSysMgr executable. HP/Palm has not released the source for LunaSysMgr.

This article describes how to perform that patch, but as of late Aug 2011, no such patches are yet available.

==Built In Layouts==

Generally there are three keyboard layouts: QWERTY, QWERTZ and AZERTY.
On selected keys of these layouts extended characters can be accessed with a long tap on some keys. The long-tap causes a lookup of the extended character set defined for that key and those optional characters are displayed to be selected from. For example, the "a" key may have extended characters of á or à or â or ã.

==I. Keyboard layouts==

Each keyboard layout consists of main layout and 3 interchangeble bottom rows of keyboard for different applications.

Main keyboard layout describes 5 rows of 12 keys each.

3 bottom rows are 12 keys each

In total there are 8 rows of 12 keys each.

Each key is described by 4 double words (4 bytes).

1 - button type(big endian)
2 last bytes are used
Mostly they are set of flags but there is too few info to decode all of them.
The least one is button type
BF - no button. i.e. there is button and if you press it it will type but
it is invisible (try typing to the right of 0 or to the left of 1
to check what is being typed in normal keyboard)
3F - normal button
40 - long button (like spacebar)
The second is length class:
40 - short one (mostly spacers)
80 - normal width
C0 - long one (Shift etc.)
A0 - very long one (space bar)
Normal button will look like 0x0000803F

2 - utf-code of main symbol(little endian)(It may be not utf but USC2 but as I get it UTF8 in little endian is the same as USC2 (at least for english and cyrillic characters))

3 - utf-code of secondary symbol(little endian)

4 - Extended characters set address (little endian)

About symbols (2,3)
If the greatest byte (the most right one in LE) is 01 then it is not
symbol but the text from some static variable defined in the file (like
smiles, .com etc.) or special button like shift, enter etc.
If main symbol is considered regional by system (it is hardcoded
somewhere in LunaSysMgr) then the behaviour is as follows:
a. When shift is pressed The big letter is produced
b. Without shift small letter is produced.
c. With caps on big letter is produced
d. When switched to secondary keys ([]-/ button) secondary symbol is
e. Button is white
produced always
If main symbol is not considered regional (unfortunatelly russian
letters are not considered regional)
a. When shift is pressed secondary symbol is produced
b. Without shift small(if appliable) main symbol is produced
c. With caps on big(if appliable) main symbol is produced
d. When switched to secondary keys ([]-/ button) behaviour of
e. Button is light grey
previous statements is not changed. And look of keys too.

To make nonregional keys act like regional ones the only workaround is to duplicate them as main and secondary symbols.

It is easy to say that any zero key is just skipped during keyboard generation process so in reall there can be less then 12 buttons in a row.

Extended characters set address is internal pointer not and offset so it is quite a work to find which one corresponds to which character set.

==II. Extended characters sets==

There are 65 extended character sets.

Namely:

17 for letters (E R T Y U I O P A S D G L Z C N M). They are general for all 3 keyboard layouts.

3*10 for numbers (1 2 3 4 5 6 7 8 9 0). For each layout there are different sets for each number

5+5+6 for punctuations and .com. There are 4 for QWERTY and QWERTZ and 5 for AZERTY. And for each layout there is special set for .com

Also there is a set for http:// and for choosing keyboard size. They are general for all 3 layouts.

Each set is a sequence of double words with utf-codes of letters (or links to static text) ending with zero dword.

For ex. for A-letter set it is:
41000000 c0000000 c1000000 c2000000 c3000000 c4000000 c5000000 e6000000 aa000000 00000000

==III. Changing Layout==

In Keyboard layout you can easily change button type flags, primary and secondaty symbol.

Extended characters set address can be changed too, but you should deduce it by initial values of layouts. It is not very hard but requires time.

Characters in extended characters sets can be changed too. Though you cannot change number of characters in particualr set you can choose the one with needed number of symbols and reassign it to needed button by changing address in layout.

==IV. Offsets==

{| class="wikitable"
|- style="vertical-align:top;"
!3.0.0 emul!!3.0.0 device!!3.0.2 device!!keyboard/letter
|-
|0x003EE840||0x003BEE80||0x003CACB0||QWERTY Main layout
|-
|0x003EEC00||0x003BF240||0x003CB070||QWERTY Default bottom row
|-
|0x003EECC0||0x003BF300||0x003CB130||QWERTY URL bottom row
|-
|0x003EED80||0x003BF3C0||0x003CB1F0||QWERTY Email bottom row
|-
|
|-
|0x003EEE40||0x003BF480||0x003CB2B0||QWERTZ Main layout
|-
|0x003EF200||0x003BF840||0x003CB670||QWERTZ Default bottom row
|-
|0x003EF2C0||0x003BF900||0x003CB730||QWERTZ URL bottom row
|-
|0x003EF380||0x003BF9C0||0x003CB7F0||QWERTZ Email bottom row
|-
|
|-
|0x003EF440||0x003BFA80||0x003CB8B0||AZERTY Main layout
|-
|0x003EF800||0x003BFE40||0x003CBC70||AZERTY Default bottom row
|-
|0x003EF8C0||0x003BFF00||0x003CBD30||AZERTY URL bottom row
|-
|0x003EF980||0x003BFFC0||0x003CBDF0||AZERTY Email bottom row
|}

Extended character offsets are very numberous to list them all.
I will just name offsets for firs one and the order of sets. As each set is ended with 0x00000000, it will be quite easy to distinguish them

The order is following

{| class="wikitable"
|- style="vertical-align:top;"
!3.0.0 emul!!3.0.0 device!!3.0.2 device!!letter to which character set is bind
|-
|0x003C33DC||0x00388BB4||0x00393608||QWERTY 1
|-
|||||||QWERTY 2
|-
|||||||QWERTY 3
|-
|||||||QWERTY 4
|-
|||||||QWERTY 5
|-
|||||||QWERTY 6
|-
|||||||QWERTY 7
|-
|||||||QWERTY 8
|-
|||||||QWERTY 9
|-
|||||||QWERTY 0
|-
|
|-
|||||||E
|-
|||||||R
|-
|||||||T
|-
|||||||Y
|-
|||||||U
|-
|||||||I
|-
|||||||O
|-
|||||||P
|-
|||||||A
|-
|||||||S
|-
|||||||D
|-
|||||||G
|-
|||||||L
|-
|||||||Z
|-
|||||||C
|-
|||||||N
|-
|||||||M
|-
|
|-
|||||||QWERTY ,/
|-
|||||||QWERTY .?
|-
|||||||QWERTY '"
|-
|||||||QWERTY -_
|-
|
|-
|||||||Hide keyboard(size of it)
|-
|
|-
|||||||URL key /
|-
|
|-
|||||||QWERTY .com
|-
|
|-
|||||||QWERTZ 1
|-
|||||||QWERTZ 2
|-
|||||||QWERTZ 3
|-
|||||||QWERTZ 4
|-
|||||||QWERTZ 5
|-
|||||||QWERTZ 6
|-
|||||||QWERTZ 7
|-
|||||||QWERTZ 8
|-
|||||||QWERTZ 9
|-
|||||||QWERTZ 0
|-
|
|-
|||||||QWERTZ ,;
|-
|||||||QWERTZ .:
|-
|||||||QWERTZ #?
|-
|||||||QWERTZ -'
|-
|||||||QWERTZ .com
|-
|
|-
|||||||AZERTY 1
|-
|||||||AZERTY 2
|-
|||||||AZERTY 3
|-
|||||||AZERTY 4
|-
|||||||AZERTY 5
|-
|||||||AZERTY 6
|-
|||||||AZERTY 7
|-
|||||||AZERTY 8
|-
|||||||AZERTY 9
|-
|||||||AZERTY 0
|-
|
|-
|||||||AZERTY ,?
|-
|||||||AZERTY .;
|-
|||||||AZERTY :/
|-
|||||||AZERTY @_
|-
|||||||AZERTY !*
|-
|||||||AZERTY .com
|}

AppStats

2011-02-08T06:43:23Z

Rboatright: Created page with 'App Stats A method of recovering application statistics from webOS apps. Backend: CouchDB Document Structure: Json. Required data pairs: NDUID, AppID, timestamp, ap…'

App Stats

A method of recovering application statistics from webOS apps.

Backend: CouchDB

Document Structure: Json.

Required data pairs: NDUID, AppID, timestamp, appversion, osversion, devicetype

Optional data pairs: Anything else that the app author wants to gather

Max post size of any document: 1K

Project URL: appstats.preware.org

Portal:webOS Applications

2011-02-08T06:39:52Z

Rboatright:

__notoc__
This page is currently available in two languages:
:[[Image:Australia.png]] [[Image:USA.png]] [[Portal:webOS Applications]]
:[[Image:China.png]] [[Portal:webOS Applications-ZH]]
{{preware}}
{{portal-header
|The Instructions on [[Tutorials_webOS_Hello_World|building WebOS Mojo applications]] of your own are simple and straight forward.
}}
{{portal-header
|If you are looking for [[Portal:Patches_to_webOS|patches to modify existing webOS applications]] those are found in '''[[Portal:Patches_to_webOS|Patches to webOS]]'''.
}}
{{portal-three-columns
|column1=
* [[Portal:webOS_Applications_All|All]]
* [[Portal:webOS_Applications_Business|Business]]
* [[Portal:webOS_Applications_Communications|Communications]]
* [[Portal:webOS_Applications_Entertainment|Entertainment]]

|column2=
* [[Portal:webOS_Applications_Food|Food]]
* [[Portal:webOS_Applications_Games|Games]]
* [[Portal:webOS_Applications_Lifestyle|Lifestyle]]
* [[Portal:webOS_Applications_News|News]]

|column3=
* [[Portal:webOS_Applications_Social Networking|Social Networking]]
* [[Portal:webOS_Applications_Tutorial|Tutorial]]
* [[Portal:webOS_Applications_Utilities|Utilities]]
* [[Portal:webOS_Applications_Productivity|Productivity]]
}}
{{portal-two-columns
|column1=
== Tutorials ==

* [[Tutorials_webOS_Getting_Started|Getting Started Developing]]
* [[Tutorials_webOS_Hello_World|Building Your First Application]]
* [[Tutorials_webOS_Porting_Older_App|Porting older javascript apps]]
* [[Tutorials_webOS_IPKG_Installer|IPKG Installer]]
* [[Tutorials_webOS_Installing_An_Ipk|Installing an IPK]]
* [[Komodo|Komodo Specific Tutorials]]
* [[Tutorials_webOS_Loading_Existing_Apps_Into_An_Eclipse_Project|Loading Existing apps into an Eclipse Project]]
* [[Tutorials_webOS_Using Cookies|Using Cookies To Move Variables]]
* [[Tutorials_webOS_Debugging 101|Common Ways to Debug Your Application]]
* [[Tutorials_webOS_Getting_JSON_From_An_External_MySQL_Database|Getting JSON From An External MySQL Database]]
* [[Tutorials_Differences_between_Emulator_and_Pre|Diffences between Emulator and Pre]]

== Want to write a tutorial and Add it? ==

Just name the article like

"Tutorials webOS " + name

Ex: Tutorials_webOS_Getting_Started<br />
(spaces are the same thing as underscores)

==Need help formatting your text for wiki? ==
Find easy to use markup examples with visual representations on our formatting help pages.

[[Help:Formatting | Wiki Formatting Help]]

|column2=
== Policies about adding Applications ==

Your application can be any progress (Completed/Beta/Design Phase), just make sure you have a temporary name. For example if your application is called "Testing This":

<source lang="text">
{{portal-application-item
|name=Asteroids
|article=Asteroids
|user=AWESOM-O
|site=http://domain.com/asteroids/
|description=This is a short description, leave screenshots
and other details for the application page.
}}
</source>

Place this under the [[Portal:webOS Applications All|All webOS Application Portal]], and the category it goes under (for instance "Games" if it is a game). You can always change the applications name just make sure it is not taken and let us know on the [[Admin_Changes|Admin Changes]] page so we can delete the old application page (so others can use it).

}}
==Development Projects==
webOS Mojo and Multiple language projects being developed as open source by the community.

* [[Application:Preware|Preware]]: A mojo app with backend plugin to run ipkg and fetch over the air installs and updates from the Preware ipkg feed.
* [[On Screen Keyboard]]
* [[My notification|My notification]] : a Mojo app to enable the changing of system sounds and wallpaper.
* [[EBook-Reader]]: a Mojo app for reading text-oriented books on line.
* [[Save and Restore]]: save and restore application

== Development Proposals ==
These proposals for webOS applications lack a formal project at this time.
* [[AppStats| App Stats, an application reporting standard for webOS apps]]
* [[Splash Application|Splash Application]]
* [[Proposal_to_install_Homebrew_apps_on_/media/internal_%28USB_partition%29]]

Portal:Community

2011-01-16T00:59:12Z

Rboatright: /* Other Web Sites */

There is a large community of developers around the Palm Pre.

* [[Contact|Contact]]
* [[Meetups|Meetups]]

== IRC ==
{{tux|Tux_Chat.png|float:right;}}
You can join us anytime on our [[wikipedia:Internet Relay Chat|IRC]] channels.

* [irc://chat.freenode.net/webos #webos] for general Palm Pre topics
* [irc://chat.freenode.net/webos-internals #webos-internals] for discussion of the operating system
* [irc://chat.freenode.net/webos-watercooler #webos-watercooler] for off-topic discussion

We are located on the freenode network, accessible from http://webchat.freenode.net/

Come and join us

=== Guidelines ===
{{tux|Tux_Mad.png|float:right;}}
See [[WebOS-Internals IRC Channel Policy]].

* For pastes greater than 2 lines, use a pastebin such as [http://webos.pastebin.com/ webos.pastebin.com].
* Keep the language civilized. Don't try to debate. WebOS is cross platform and the [[Portal:Tools|tools]] supported by webOS-Internals are also.

== Other Web Sites ==
* [http://developer.palm.com/distribution/index.php webOSdev Forum] Palm's official developer forum
* [http://webos101.com webOS 101] webOS Programming wiki focusing on app development
* [http://www.webosschool.com/ webOS School] On-line webOS programming courses

[[File:Webos-internals-logo-huge.png|400px|left|WebOS-Internals logo -- BIG version]]

Clicking through to the big picture makes available a full-res 1203x1414 px version. Note that the white areas around the Tux are PNG Alpha Channel Transparency and so will work on any background (except black)

200px pre-scaled version.

[[File:WebOS-Internals-logo-200px.png|200px|left| Pre-scaled 200px version]]

155px scaled version for upper left logo of the wiki

[[File:Webos-internals-logo-huge.png|135px|left|WebOS-Internals logo -- BIG version]]

Portal:Community

2011-01-16T00:48:58Z

Rboatright: /* Other Web Sites */

Portal:Community

2011-01-16T00:47:01Z

Rboatright: /* Other Web Sites */

There is a large community of developers around the Palm Pre.

* [[Contact|Contact]]
* [[Meetups|Meetups]]

== IRC ==
{{tux|Tux_Chat.png|float:right;}}
You can join us anytime on our [[wikipedia:Internet Relay Chat|IRC]] channels.

* [irc://chat.freenode.net/webos #webos] for general Palm Pre topics
* [irc://chat.freenode.net/webos-internals #webos-internals] for discussion of the operating system
* [irc://chat.freenode.net/webos-watercooler #webos-watercooler] for off-topic discussion

We are located on the freenode network, accessible from http://webchat.freenode.net/

Come and join us

=== Guidelines ===
{{tux|Tux_Mad.png|float:right;}}
See [[WebOS-Internals IRC Channel Policy]].

* For pastes greater than 2 lines, use a pastebin such as [http://webos.pastebin.com/ webos.pastebin.com].
* Keep the language civilized. Don't try to debate. WebOS is cross platform and the [[Portal:Tools|tools]] supported by webOS-Internals are also.

== Other Web Sites ==
* [http://developer.palm.com/distribution/index.php webOSdev Forum] Palm's official developer forum
* [http://webos101.com webOS 101] webOS Programming wiki focusing on app development
* [http://www.webosschool.com/ webOS School] On-line webOS programming courses

[[File:Webos-internals-logo-huge.png|400px|left|WebOS-Internals logo -- BIG version]]

Clicking through to the big picture makes available a full-res 1203x1414 px version. Note that the white areas around the Tux are PNG Alpha Channel Transparency and so will work on any background (except black)

[[File:WebOS-Internals-logo-200px.png|200px|left| Pre-scaled 200px version]]

File:WebOS-Internals-logo-200px.png

2011-01-16T00:45:27Z

Rboatright:

Portal:Community

2011-01-16T00:45:12Z

Rboatright: /* Other Web Sites */

There is a large community of developers around the Palm Pre.

* [[Contact|Contact]]
* [[Meetups|Meetups]]

== IRC ==
{{tux|Tux_Chat.png|float:right;}}
You can join us anytime on our [[wikipedia:Internet Relay Chat|IRC]] channels.

* [irc://chat.freenode.net/webos #webos] for general Palm Pre topics
* [irc://chat.freenode.net/webos-internals #webos-internals] for discussion of the operating system
* [irc://chat.freenode.net/webos-watercooler #webos-watercooler] for off-topic discussion

We are located on the freenode network, accessible from http://webchat.freenode.net/

Come and join us

=== Guidelines ===
{{tux|Tux_Mad.png|float:right;}}
See [[WebOS-Internals IRC Channel Policy]].

* For pastes greater than 2 lines, use a pastebin such as [http://webos.pastebin.com/ webos.pastebin.com].
* Keep the language civilized. Don't try to debate. WebOS is cross platform and the [[Portal:Tools|tools]] supported by webOS-Internals are also.

== Other Web Sites ==
* [http://developer.palm.com/distribution/index.php webOSdev Forum] Palm's official developer forum
* [http://webos101.com webOS 101] webOS Programming wiki focusing on app development
* [http://www.webosschool.com/ webOS School] On-line webOS programming courses

[[File:Webos-internals-logo-huge.png|400px|left|WebOS-Internals logo -- BIG version]]
[[File:WebOS-Internals-logo-200px.png|200px|left| Pre-scaled 200px version]]

Portal:Community

2011-01-16T00:44:39Z

Rboatright:

There is a large community of developers around the Palm Pre.

* [[Contact|Contact]]
* [[Meetups|Meetups]]

== IRC ==
{{tux|Tux_Chat.png|float:right;}}
You can join us anytime on our [[wikipedia:Internet Relay Chat|IRC]] channels.

* [irc://chat.freenode.net/webos #webos] for general Palm Pre topics
* [irc://chat.freenode.net/webos-internals #webos-internals] for discussion of the operating system
* [irc://chat.freenode.net/webos-watercooler #webos-watercooler] for off-topic discussion

We are located on the freenode network, accessible from http://webchat.freenode.net/

Come and join us

=== Guidelines ===
{{tux|Tux_Mad.png|float:right;}}
See [[WebOS-Internals IRC Channel Policy]].

* For pastes greater than 2 lines, use a pastebin such as [http://webos.pastebin.com/ webos.pastebin.com].
* Keep the language civilized. Don't try to debate. WebOS is cross platform and the [[Portal:Tools|tools]] supported by webOS-Internals are also.

== Other Web Sites ==
* [http://developer.palm.com/distribution/index.php webOSdev Forum] Palm's official developer forum
* [http://webos101.com webOS 101] webOS Programming wiki focusing on app development
* [http://www.webosschool.com/ webOS School] On-line webOS programming courses

[[File:Webos-internals-logo-huge|400px|left|WebOS-Internals logo -- BIG version]]
[[File:WebOS-Internals-logo-200px|200px|left| Pre-scaled 200px version]]

File:Webos-internals-logo-huge.png

2011-01-16T00:40:03Z

Rboatright:

Sprint Pre Plus

2011-01-11T07:25:25Z

Rboatright: /* Step 3. Remove your Sprint Pre com board */

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Your Palm profile login information. That's the email and password you activated your Pre with in the first place. You can test if you remember them correctly at [https://ps.palmws.com/palmcsext/console/pages/LoginPage.iface Palm's profile login page].
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. You can open each file in Internalz and write the values down.

'''The simplest way to get these tokens is to install "Show Properties" using Preware, and have the system email you a castle.xml file directly.'''

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: [[Application:MetaDoctor]]. However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre>
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. (Images are being served from Ifixit.net's palm pre teardown page.)

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken<br /> <img width=350>http://guide-images.ifixit.net/igi/bFeIXAZtnVqjBILK.medium</img>
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. you need to pry out a tiny bit and push DOWN towards the keyboard on the four locking tabs. As you do, the keyboard bezel and the keyboard ill seperate from the backplate. The keyboard bezel is VERY THIN. Once you have it started to seperate on both sides, run your plastic wedge or a fingernail around the seperation. To swap JUST the comm board, it is NOT nessessary to pull the volume buttons out, you can leave them in. Now, with the keyboard down a bit, push up on the comm board and it will hinge up towards the top of the phone on its connector cable. The cable unplugs from the flat of the comm board. It does not pull out "parallel" with the cable, it pulls out "perpendicular" to the cable. <br /> <img width=350>http://guide-images.ifixit.net/igi/B2J3e3Tv6oKLJe3Y.medium</img>
# Remove the coms board.
#* If you are doing a Sprint to Verizon pre- to Pre+ since both are cdma phones, you do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here and disconnect the two gps connectors. <br /> <img width=350>http://guide-images.ifixit.net/igi/qBW1xicfUSWhZ5VB.medium</img>
#: Now, simply apply gentle pressure, and the coms board will pop right out: <br /><img width=350>http://guide-images.ifixit.net/igi/2YgNcQN3dAf6idkE.medium</img>
#* If you are doing a Sprint to ATT pre- to pre+, you will need to swap the entire back, which requires removing the volume buttons and replacing them. The cdma back and the gsm back have different antenna systems and need to be swapped as a unit.

'''Coms board removed.''' Note the cable plug where the comm board was attached on the orange ribbon cable. <img>http://guide-images.ifixit.net/igi/eklF6cnfCxUNTTwl.medium</img>

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.

===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device.

java -jar webosdoctorp100ewwsprint-1.4.5.jar

When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process.
* Select your language.
* Accept the license.
* Log in to your Palm profile.
* Step through the silly tutorial.

Once you have done this, the phone will reboot and you will be at your webOS home screen.

====Confirm everything worked====
* Note that the carrier should say "Sprint."
* Confirm that our tokens were properly over-written by going to "Device Info" from the launcher. Scroll down and click on "More Info".
** The Carrier should say "Sprint"
** The Model should be "P100EWW".

If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
It's going to seem really odd, but now, you get to run the doctor '''again.''' This has two purposes:

* To get all the stock Sprint apps back, like Sprint Nav and Sprint TV
* To get the Sprint PRL (preffered roaming list).

So, you need to run the regular old, run of the mill Sprint webOS Doctor. You have one in the meta-doctor/download directory that you renamed a while ago. CD to that folder and run

java -jar webosdoctorp100ewwsprint-1.4.5.jar

Put your phone in recovery mode (Up volume + power) and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many. Go through the regular activation AGAIN and it will download your palm profile information and re-install any app store apps you have.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Sprint Pre Plus

2011-01-11T07:20:20Z

Rboatright: /* Step 1: Extract working Sprint Pre Tokens */

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Your Palm profile login information. That's the email and password you activated your Pre with in the first place. You can test if you remember them correctly at [https://ps.palmws.com/palmcsext/console/pages/LoginPage.iface Palm's profile login page].
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. You can open each file in Internalz and write the values down.

'''The simplest way to get these tokens is to install "Show Properties" using Preware, and have the system email you a castle.xml file directly.'''

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: [[Application:MetaDoctor]]. However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre>
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. (Images are being served from Ifixit.net's palm pre teardown page.)

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken<br /> <img width=350>http://guide-images.ifixit.net/igi/bFeIXAZtnVqjBILK.medium</img>
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. you need to pry out a tiny bit and push DOWN towards the keyboard on the four locking tabs. As you do, the keyboard bezel and the keyboard ill seperate from the backplate. The keyboard bezel is VERY THIN. Once you have it started to seperate on both sides, run your plastic wedge or a fingernail around the seperation. To swap JUST the comm board, it is NOT nessessary to pull the volume buttons out, you can leave them in. Now, with the keyboard down a bit, push up on the comm board and it will hinge up towards the top of the phone on its connector cable. The cable unplugs from the flat of the comm board. It does not pull out "parallel" with the cable, it pulls out "perpendicular" to the cable. <br /> <img width=350>http://guide-images.ifixit.net/igi/B2J3e3Tv6oKLJe3Y.medium</img>
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here and disconnect the two gps connectors. <br /> <img width=350>http://guide-images.ifixit.net/igi/qBW1xicfUSWhZ5VB.medium</img>
# Now, simply apply gentle pressure, and the coms board will pop right out: <br /><img width=350>http://guide-images.ifixit.net/igi/2YgNcQN3dAf6idkE.medium</img>

Coms board removed. Note the cable plug where the comm board was attached on the orange ribbon cable. <img>http://guide-images.ifixit.net/igi/eklF6cnfCxUNTTwl.medium</img>

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.

===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device.

java -jar webosdoctorp100ewwsprint-1.4.5.jar

When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process.
* Select your language.
* Accept the license.
* Log in to your Palm profile.
* Step through the silly tutorial.

Once you have done this, the phone will reboot and you will be at your webOS home screen.

====Confirm everything worked====
* Note that the carrier should say "Sprint."
* Confirm that our tokens were properly over-written by going to "Device Info" from the launcher. Scroll down and click on "More Info".
** The Carrier should say "Sprint"
** The Model should be "P100EWW".

If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
It's going to seem really odd, but now, you get to run the doctor '''again.''' This has two purposes:

* To get all the stock Sprint apps back, like Sprint Nav and Sprint TV
* To get the Sprint PRL (preffered roaming list).

So, you need to run the regular old, run of the mill Sprint webOS Doctor. You have one in the meta-doctor/download directory that you renamed a while ago. CD to that folder and run

java -jar webosdoctorp100ewwsprint-1.4.5.jar

Put your phone in recovery mode (Up volume + power) and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many. Go through the regular activation AGAIN and it will download your palm profile information and re-install any app store apps you have.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Sprint Pre Plus

2011-01-11T07:18:58Z

Rboatright: /* Step 3. Remove your Sprint Pre com board */

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Your Palm profile login information. That's the email and password you activated your Pre with in the first place. You can test if you remember them correctly at [https://ps.palmws.com/palmcsext/console/pages/LoginPage.iface Palm's profile login page].
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. You can open each file in Internalz and write the values down.

A much simpler way is just to install "Show Properties" using Preware, and have the system email you a castle.xml file directly.

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: [[Application:MetaDoctor]]. However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre>
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. (Images are being served from Ifixit.net's palm pre teardown page.)

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken<br /> <img width=350>http://guide-images.ifixit.net/igi/bFeIXAZtnVqjBILK.medium</img>
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. you need to pry out a tiny bit and push DOWN towards the keyboard on the four locking tabs. As you do, the keyboard bezel and the keyboard ill seperate from the backplate. The keyboard bezel is VERY THIN. Once you have it started to seperate on both sides, run your plastic wedge or a fingernail around the seperation. To swap JUST the comm board, it is NOT nessessary to pull the volume buttons out, you can leave them in. Now, with the keyboard down a bit, push up on the comm board and it will hinge up towards the top of the phone on its connector cable. The cable unplugs from the flat of the comm board. It does not pull out "parallel" with the cable, it pulls out "perpendicular" to the cable. <br /> <img width=350>http://guide-images.ifixit.net/igi/B2J3e3Tv6oKLJe3Y.medium</img>
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here and disconnect the two gps connectors. <br /> <img width=350>http://guide-images.ifixit.net/igi/qBW1xicfUSWhZ5VB.medium</img>
# Now, simply apply gentle pressure, and the coms board will pop right out: <br /><img width=350>http://guide-images.ifixit.net/igi/2YgNcQN3dAf6idkE.medium</img>

Coms board removed. Note the cable plug where the comm board was attached on the orange ribbon cable. <img>http://guide-images.ifixit.net/igi/eklF6cnfCxUNTTwl.medium</img>

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.

===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device.

java -jar webosdoctorp100ewwsprint-1.4.5.jar

When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process.
* Select your language.
* Accept the license.
* Log in to your Palm profile.
* Step through the silly tutorial.

Once you have done this, the phone will reboot and you will be at your webOS home screen.

====Confirm everything worked====
* Note that the carrier should say "Sprint."
* Confirm that our tokens were properly over-written by going to "Device Info" from the launcher. Scroll down and click on "More Info".
** The Carrier should say "Sprint"
** The Model should be "P100EWW".

If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
It's going to seem really odd, but now, you get to run the doctor '''again.''' This has two purposes:

* To get all the stock Sprint apps back, like Sprint Nav and Sprint TV
* To get the Sprint PRL (preffered roaming list).

So, you need to run the regular old, run of the mill Sprint webOS Doctor. You have one in the meta-doctor/download directory that you renamed a while ago. CD to that folder and run

java -jar webosdoctorp100ewwsprint-1.4.5.jar

Put your phone in recovery mode (Up volume + power) and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many. Go through the regular activation AGAIN and it will download your palm profile information and re-install any app store apps you have.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Sprint Pre Plus

2011-01-11T07:03:22Z

Rboatright:

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Your Palm profile login information. That's the email and password you activated your Pre with in the first place. You can test if you remember them correctly at [https://ps.palmws.com/palmcsext/console/pages/LoginPage.iface Palm's profile login page].
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. You can open each file in Internalz and write the values down.

A much simpler way is just to install "Show Properties" using Preware, and have the system email you a castle.xml file directly.

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: [[Application:MetaDoctor]]. However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre>
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. The entire Pre teardown guide is located here for reference: Palm Pre Teardown - Page 2 - iFixit

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken <img width=350>http://guide-images.ifixit.net/igi/bFeIXAZtnVqjBILK.medium</img>
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. you need to pry out a tiny bit and push DOWN towards the keyboard on the four locking tabs. As you do, the keyboard bezel and the keyboard ill seperate from the backplate. The keyboard bezel is VERY THIN. Once you have it started to seperate on both sides, run your plastic wedge or a fingernail around the seperation. To swap JUST the comm board, it is NOT nessessary to pull the volume buttons out, you can leave them in. Now, with the keyboard down a bit, push up on the comm board and it will hinge up towards the top of the phone on its connector cable. The cable unplugs from the flat of the comm board. It does not pull out "parallel" with the cable, it pulls out "perpendicular" to the cable. <img width=350>http://guide-images.ifixit.net/igi/B2J3e3Tv6oKLJe3Y.medium</img>
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here and disconnect the two gps connectors. <img width=350>http://guide-images.ifixit.net/igi/qBW1xicfUSWhZ5VB.medium</img>
# Now, simply apply gentle pressure, and the coms board will pop right out: <img width=350>http://guide-images.ifixit.net/igi/2YgNcQN3dAf6idkE.medium</img>

Coms board removed. Note the cable plug where the comm board was attached on the orange ribbon cable. <img>http://guide-images.ifixit.net/igi/eklF6cnfCxUNTTwl.medium</img>

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.

===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device.

java -jar webosdoctorp100ewwsprint-1.4.5.jar

When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process.
* Select your language.
* Accept the license.
* Log in to your Palm profile.
* Step through the silly tutorial.

Once you have done this, the phone will reboot and you will be at your webOS home screen.

====Confirm everything worked====
* Note that the carrier should say "Sprint."
* Confirm that our tokens were properly over-written by going to "Device Info" from the launcher. Scroll down and click on "More Info".
** The Carrier should say "Sprint"
** The Model should be "P100EWW".

If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
It's going to seem really odd, but now, you get to run the doctor '''again.''' This has two purposes:

* To get all the stock Sprint apps back, like Sprint Nav and Sprint TV
* To get the Sprint PRL (preffered roaming list).

So, you need to run the regular old, run of the mill Sprint webOS Doctor. You have one in the meta-doctor/download directory that you renamed a while ago. CD to that folder and run

java -jar webosdoctorp100ewwsprint-1.4.5.jar

Put your phone in recovery mode (Up volume + power) and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many. Go through the regular activation AGAIN and it will download your palm profile information and re-install any app store apps you have.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Sprint Pre Plus

2011-01-11T05:16:53Z

Rboatright: /* Step 5: Re-program your Pre Plus using meta-doctor */

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. You can open each file in Internalz and write the values down.

A much simpler way is just to install "Show Properties" using Preware, and have the system email you a castle.xml file directly.

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: [[Application:MetaDoctor]]. However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre>
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. The entire Pre teardown guide is located here for reference: Palm Pre Teardown - Page 2 - iFixit

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken <img width=350>http://guide-images.ifixit.net/igi/bFeIXAZtnVqjBILK.medium</img>
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. you need to pry out a tiny bit and push DOWN towards the keyboard on the four locking tabs. As you do, the keyboard bezel and the keyboard ill seperate from the backplate. The keyboard bezel is VERY THIN. Once you have it started to seperate on both sides, run your plastic wedge or a fingernail around the seperation. To swap JUST the comm board, it is NOT nessessary to pull the volume buttons out, you can leave them in. Now, with the keyboard down a bit, push up on the comm board and it will hinge up towards the top of the phone on its connector cable. The cable unplugs from the flat of the comm board. It does not pull out "parallel" with the cable, it pulls out "perpendicular" to the cable. <img width=350>http://guide-images.ifixit.net/igi/B2J3e3Tv6oKLJe3Y.medium</img>
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here and disconnect the two gps connectors. <img width=350>http://guide-images.ifixit.net/igi/qBW1xicfUSWhZ5VB.medium</img>
# Now, simply apply gentle pressure, and the coms board will pop right out: <img width=350>http://guide-images.ifixit.net/igi/2YgNcQN3dAf6idkE.medium</img>

Coms board removed. Note the cable plug where the comm board was attached on the orange ribbon cable. <img>http://guide-images.ifixit.net/igi/eklF6cnfCxUNTTwl.medium</img>

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.

===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device.

java -jar webosdoctorp100ewwsprint-1.4.5.jar

When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process (note that there will be multiple odd languages to select- keep this in mind, as it will be useful to us later). Log in to your Palm profile. Once it is setup, the phone will reboot and you will be at your webOS home screen. Note that the carrier should say "Sprint." Confirm that our tokens were properly over-written by going to "Device Info" from the webOS menu and clicking on "More Info". The Carrier should say "Sprint" and the Model should be "P100EWW". If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
To get all the stock Sprint apps back, like Sprint Nav and Sprint TV and to get the Sprint PRL you need to run the regular old, run of the mill Sprint webOS Doctor. (Download here: http://palm.cdnetworks.net/rom/pre/p...0ewwsprint.jar)
Put your phone in recovery mode and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Application:MetaDoctor

2011-01-11T05:15:47Z

Rboatright: /* Step 2: Running the patched webOS Doctor */

[[Category:Application]]
This page is currently available in two languages:
:[[Image:Australia.png]] [[Image:USA.png]] [[Application:MetaDoctor]]
:[[Image:France.png]] [[Application:MetaDoctor-FR]]

= What is the Meta Doctor? =

The Webos Internals Meta Doctor is a Makefile which can modify a copy of the Palm webOS Doctor to bypass the "First Use" application and allow the phone to run without having been activated on a cell network. It accomplishes this by reaching into Palm's distributed Doctor JAR file and making changes to it. It can prevent the first use app from running, as well as applying other tweaks to the OS.

'''Documentation for the features that the MetaDoctor offers is at the top of the Makefile (you find out where that is later).'''

= Step 1: Setting up Meta-Doctor=

== Linux ==

=== Installing required software ===

# Open terminal from the ( Applications > Accessories ) menu. (If using Cygwin Method: Go to Start>Programs>Cygwin>Cygwin Bash Shell and skip to Number 3)
# If you have git installed, skip this step. If you do not have git installed, type: <pre>sudo apt-get install git-core</pre> and follow the directions to install git.
# Now type: <pre>git clone git://git.webos-internals.org/tools/meta-doctor.git</pre>
# If you do not have patch installed, you will need to install patch. (If using Cygwin method: Skip this step and jump to number 7) On an Ubuntu system type: <pre>sudo apt-get install patch</pre>
# If you do not have java installed, do so. To install java, choose ( Applications > Ubuntu Software Center ) and type '''java 6 runtime''' in search - it is easiest to search for java to find it - then follow the on screen instructions. It should be pretty simple.
# Download and install the Palm Novacom software from http://developer.palm.com. Download the version for Ubuntu [https://cdn.downloads.palm.com/sdkdownloads/1.3.1.314/sdkBinaries/palm-novacom_1.0.46_i386.deb here] and install it. (If you choose to install the full SDK instead, and are running the 64-bit version of Ubuntu 9.x you will have difficulty installing the SDK and the instructions on the download site are wrong. Read [https://developer.palm.com/distribution/viewtopic.php?f=31&t=2308 this thread] and [http://forums.precentral.net/showpost.php?p=2021966&postcount=108 this post] for help.)
# Open a terminal and navigate to the meta-doctor directory where the meta-doctor was copied to in step 3 above. (If using Cygwin method: You should already be in a terminal and just do the cd command) For example: <pre>cd meta-doctor</pre>
# Ensure that there is a downloads directory. If there is not one, create one using <pre>mkdir downloads</pre>
# Download the latest webosdoctor file using the download paths found at [http://www.webos-internals.org/wiki/Webos_Doctor_Versions Webos Doctor Versions] .The wr version is the French,German,Irish,Spanish and UK GSM version. An example download command would be: <pre>cd downloads</pre><pre>wget http://palm.cdnetworks.net/rom/pre/p1351r0d01082010/sr1ntp1351rod/webosdoctorp100ewwsprint.jar</pre>
# Rename the file that you download to include the version number for future reference (examples: webosdoctorp100ewwsprint-1.3.5.1.jar, webosdoctorp100eww-wr-1.1.3.jar, or webosdoctorp100ewwbellmo-1.2.1.jar). An example command to do that would be:<pre>mv webosdoctorp100ewwbellmo.jar webosdoctorp100ewwbellmo-1.3.5.1.jar</pre>

=== Running Meta-Doctor ===

# Navigate to the meta-doctor directory in the terminal
# If you would like Meta-Doctor to apply patches to webOS in order to add or change functionality from the factory install, open the Makefile with your favorite text editor and uncomment (remove the leading # characters from) the options you would like to use.
# Type one of the following:
#: <pre>make DEVICE=pre all-wr</pre>
#: <pre>make DEVICE=preplus all-wr</pre>
#: <pre>make DEVICE=pixiplus all-wr</pre>
#: <pre>make DEVICE=pre all-sprint</pre>
#: <pre>make DEVICE=pixi all-sprint</pre>
#: <pre>make DEVICE=pre all-bellmo</pre>
#: <pre>make DEVICE=pre all-telcel</pre>
#: <pre>make DEVICE=preplus all-verizonwireless</pre>
#: <pre>make DEVICE=pixiplus all-verizonwireless</pre>
#: <pre>make DEVICE=preplus all-att</pre>
#: <pre>make DEVICE=pixiplus all-att</pre>
#: depending on the carrier in question.
'''Note ''': use make DEVICE=palm_smartphone_type all-wr for O2 Germany, UK and Ireland / Movistar Spain / SFR France

This should begin a process within the terminal that should take 10 minutes max.

=== Error conditions ===

If an error message appears with unknown in a file name, check the file rename in step 8 above.

=== If the build fails ===

If the make command fails, you can use <pre>make clobber</pre> to clean up the build directory. After this you can re-run the command.

== Mac OS X 10.6 ==

#Install MacPorts first, which will allow us to easily install the necessary packages for MetaDoctor. [http://www.macports.org/install.php]. Please note that MacPorts requires Apple's Xcode Developer Tools (version 3.2.1 or later for Snow Leopard, 3.1.4 or later for Leopard, or 2.5 for Tiger), found at the [http://connect.apple.com/ Apple Developer Connection site] or on your Mac OS X installation CDs/DVD.
#Install md5sum: <pre>sudo port install md5sha1sum</pre>
#Install gnutar: <pre>sudo port install gnutar</pre>
#Install git: <pre>sudo port install git-core</pre>
# Now type: <pre>git clone git://git.webos-internals.org/tools/meta-doctor.git</pre>
#Install patch: <pre>sudo port install gpatch</pre>
#If you do not have Java installed, do so. To install Java, click on the "Apple" icon and select "Software Update." This will automatically update you to the latest version of Java if necessary, as Apple supplies their own version of Java. Further instructions can be found [http://support.apple.com/kb/HT1338?viewlocale=en_US here].
#Download and install the Palm Novacom software from http://developer.palm.com. The Mac OS X SDK is located [http://cdn.downloads.palm.com/sdkdownloads/1.4.5.465/sdkBinaries/Palm_webOS_SDK.1.4.5.465.dmg here].
#Open a terminal and navigate to the meta-doctor directory where the meta-doctor was copied to in step 3 above.<pre>cd meta-doctor</pre>
#Ensure that there is a downloads directory. If there is not one, create one using <pre>mkdir downloads</pre>
#Download the latest webosdoctor file using the download paths found at [http://www.webos-internals.org/wiki/Webos_Doctor_Versions Webos Doctor Versions] .The wr version is the French,German,Irish,Spanish and UK GSM version. An example download command would be: <pre>cd downloads</pre><pre>wget http://palm.cdnetworks.net/rom/pre/p1351r0d01082010/sr1ntp1351rod/webosdoctorp100ewwsprint.jar</pre>
#Rename the file that you download to include the version number for future reference (examples: webosdoctorp100ewwsprint-1.3.5.1.jar, webosdoctorp100eww-wr-1.1.3.jar, or webosdoctorp100ewwbellmo-1.2.1.jar). An example command to do that would be:<pre>mv webosdoctorp100ewwbellmo.jar webosdoctorp100ewwbellmo-1.3.5.1.jar</pre>
#See "Running MetaDoctor" above.

==Using a Virtual Machine==

If you do not have a Linux system, you will need to run the meta-doctor in a virtual machine. For windows users there are two options. For Mac users, follow option 1.

===Running in VMware or VirtualBox===

# Download [http://www.ubuntu.com/getubuntu/download Ubuntu 9.10].
# Download a virtual machine program, either vmware or virtualbox. A virtual machine is simply a program that allows you to piggyback a second operating system on top of your native OS without dual booting or actually having a Linux machine.
#: I ended up using VirtualBox instead, because I found the VMware to be very confusing on what to actually download. The Virtual box website is very simple and straight forward. Here is a link for the virtualbox download for Windows: [http://download.virtualbox.org/virtualbox/3.0.10/VirtualBox-3.0.10-54097-Win.exe VirtualBox-3.0.10-54097-Win]
# Now install virtualbox just like you would install any other application, nothing fancy here.
# Start up virtualbox and follow either of these instructions to install Ubuntu
## http://www.helpdeskgeek.com/linux-tips/how-to-install-ubuntu-in-virtualbox/
## http://www.psychocats.net/ubuntu/virtualbox

===Using WUBI===

Windows users have another option to avoid using a virtual machine. They can use the meta doctor without harming your current installation of windows using simple Ubuntu installer called WUBI. Also no need for moding any partitions or installing any boot loaders. It will just appear as program in your installed software list and when you do not want it anymore simply uninstall it while in windows through Control Panel. It is easy and there is no virtual machine headaches of trying to configure USB, Network and File sharing with host computer... To access it you just reboot and choose Ubuntu from dual boot screen.

# download [http://www.ubuntu.com/getubuntu/download Ubuntu 9.10]
# burn that file to a cd or mount to virtual drive
# Run cd in windows (the wubi.exe file inside the disk, it also comes up in auto run)
# Click on '''Install Inside windows'''.
#: This will install Ubuntu while running Windows without the need of making a partition I would recomand making the install image the full recommended 30 gigs if you have the hard drive space and think you are interested in actually using the Ubuntu OS, otherwise the minimum recommended by Wubi should be just fine.
# Restart your computer and you can dual boot to Windows or Ubuntu

The nice thing about this is that it will allow you to uninstall Ubuntu right from Windows as if it was never there and remove the dual boot, not to mention the fact you do not need to partition your drive.

If you are still wondering what Wubi is the fallowing link should explain it to you better.
[https://wiki.ubuntu.com/WubiGuide Wubi Guide]

'''Note:'''
this will only work with the cd image found at the Ubuntu Download link. The dvd image of 9.04/9.10 is a live cd/installer and does not have the option to install inside windows using Wubi

==Using Cygwin==

Windows users can alternatively use [http://www.cygwin.com/ Cygwin] to run Meta-Doctor. This can often be simpler and faster than installing a full-blown Virtual Machine.

Simply install Cygwin, and include the following additional packages:

# Python
# Make
# Patch
# Git
# Zip
# Unzip
# wget

(use View "Full" to find these specific packages more easily)

After you have installed these packages, you can follow the [[Application:MetaDoctor:#Linux | Linux instructions]]

NB: You can find the Makefile to edit in <cygwin install folder>\home\<username>\meta-doctor

For example <pre>C:\cygwin\home\johndoe\meta-doctor</pre>
[[Media:Example.ogg]]

= Step 2: Running the patched webOS Doctor
The updated doctor version has the same name as the original, but is in a new folder: ''meta-doctor/build/pre-p100eww-sprint-1.3.5.1/webosdoctorp100ewwsprint-1.3.5.1.jar''.

If you are running in Ubuntu or Cygwin, you can just run the new jar file now.

If you are running Ubuntu using VM, you will need to copy the new jar out of the VM into your live desktop to run the jar in your native OS.

CD to the folder where your new jar file is, and type something like:

java -jar webosdoctorp100ewwsprint-1.3.5.1.jar

If you were using a VM or some other virtual method, you will need to copy the jar file out to your main operating system before running it.

''Windows host:''

[http://ubuntuexperiment.wordpress.com/2008/11/12/sharing-folders-between-host-and-guest-os-in-virtualbox/ VirtualBox folder Sharing]

[http://www.howtogeek.com/howto/ubuntu/how-to-share-folders-with-your-ubuntu-virtual-machine-guest/ VMWare folder Sharing]

''Mac OSX host:''

[http://davidherron.com/blog/topics/628-virtualbox-running-ubuntu-accessing-host-file-system-mac-os-x VirtualBox folder Sharing]

: ''NOTE: this only applies to WUBI Users''
You should be able to run the JAR as if you had Linux installed natively because in a sense you do (as long as Java is installed and you run the Jar using Java) but if you rather run it in windows

Using terminal the following command in a Wubi installation of Ubuntu will copy the JAR file to the host Windows OS :<pre>cp /meta-doctor/build/pre-p100eww-sprint-1.2.1/webosdoctorp100ewwsprint-1.2.1.jar /host/webosdoctorp100ewwsprint-1.2.1.jar</pre>
This will place the Jar either in your Windows C:\ drive or whatever drive you installed Wubi to.

== Once the Doctor is running ==

# Select your language
# Accept the license agreement
# Connect your Pre to your PC via USB and select "Next" when it becomes available

After completion the device will reboot and present you with the activation set-up.

If your PC does not recognize your Pre and you cannot go past step 3 above, try the following steps:

# With the USB cable connected, completely power off the Pre (hold down the power button until the option to power off appears)
# Hold down the Up button on the volume rocker
# While holding the Up button, power on the Pre
# "Next" should now be enabled - proceed with the recovery
{{tux|Tux_with_Pre.png|float:right;}}
The above steps will put the Pre into bootloader recovery mode and should allow the PC to recognize your device and proceed with the restore. In this mode the screen will display a giant USB logo instead of the usual Palm startup logo.

When the process finishes, the Pre will reboot and your new modified image will have been installed.

----

After the doctor completes, you will need to run the "First Run" application. To do this, you will need an active internet connection. Either WiFi or Cellular. If you do not have WiFi and cannot connect to the Palm Profile servers, you might have a problem with your programming. This Meta Doctor (or webOS Doctor in general) could possibly erase the modem's programming. To resolve you will need to perform the following steps:

'''Note:''' This has only been confirmed to resolve Sprint CDMA issues, YMMV.

'''Note 2:''' You should try to update your profile first. Open the phone app, open the App Menu and select ''Preferences'' then select ''Update Network Settings''. If you get an error, then procede with these instructions.
*'''1.''' Open the Phone App.
*'''2.''' Enter ''##MSL#'' (MSL= 6 digit lock code. Get this from Sprint.)
*'''3.''' Verify your MDN and MSID are incorrect. If they are incorrect, continue. If they are correct, this is not your problem and you should not continue.
*'''4.''' Select ''Edit''.
*'''5.''' Select the first box (MDN) and enter your 10-digit cellular number.
*'''6.''' Select the second box (MSID) and enter your 10-digit MSID (Get this from Sprint).
*'''7.''' Select ''Save''.
*'''8.''' Backswipe out of the the view.
*'''9.''' You should now be able to open complete '''Note 2''' above without any errors.

You should now be able to run the ''First Use'' application without any problems.

=If the Doctor will not run=
Go [http://www.webos-internals.org/wiki/How_To_Recover here] if you have further problems connecting your Pre to the running Meta'ed Doctor.

=Miscellaneous=

==How to change a provider's DB-entry so 3G data can be used on the Pre==

[http://forums.precentral.net/gsm-pre/211728-modifying-webos-carrier-network-settings.html#post2002079 This post] and [http://forums.precentral.net/palm-pre/209222-few-questions-about-german-palm-pre-6.html this thread] describe various ways to adjust the provider's data base in the Pre, so the 3G datacom works on non-supported networks. webOS 1.3.1 allows setting of the providers data directly from the activation screen for providers that are present in the DB. Some report that they are not able to do that and that they cannot get 3G datacom working on 1.3.1

Sprint Pre Plus

2011-01-11T03:17:52Z

Rboatright: /* Process */

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. You can open each file in Internalz and write the values down.

A much simpler way is just to install "Show Properties" using Preware, and have the system email you a castle.xml file directly.

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: [[Application:MetaDoctor]]. However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre>
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. The entire Pre teardown guide is located here for reference: Palm Pre Teardown - Page 2 - iFixit

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken <img width=350>http://guide-images.ifixit.net/igi/bFeIXAZtnVqjBILK.medium</img>
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. you need to pry out a tiny bit and push DOWN towards the keyboard on the four locking tabs. As you do, the keyboard bezel and the keyboard ill seperate from the backplate. The keyboard bezel is VERY THIN. Once you have it started to seperate on both sides, run your plastic wedge or a fingernail around the seperation. To swap JUST the comm board, it is NOT nessessary to pull the volume buttons out, you can leave them in. Now, with the keyboard down a bit, push up on the comm board and it will hinge up towards the top of the phone on its connector cable. The cable unplugs from the flat of the comm board. It does not pull out "parallel" with the cable, it pulls out "perpendicular" to the cable. <img width=350>http://guide-images.ifixit.net/igi/B2J3e3Tv6oKLJe3Y.medium</img>
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here and disconnect the two gps connectors. <img width=350>http://guide-images.ifixit.net/igi/qBW1xicfUSWhZ5VB.medium</img>
# Now, simply apply gentle pressure, and the coms board will pop right out: <img width=350>http://guide-images.ifixit.net/igi/2YgNcQN3dAf6idkE.medium</img>

Coms board removed. Note the cable plug where the comm board was attached on the orange ribbon cable. <img>http://guide-images.ifixit.net/igi/eklF6cnfCxUNTTwl.medium</img>

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.

===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device. When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process (note that there will be multiple odd languages to select- keep this in mind, as it will be useful to us later). Log in to your Palm profile. Once it is setup, the phone will reboot and you will be at your webOS home screen. Note that the carrier should say "Sprint." Confirm that our tokens were properly over-written by going to "Device Info" from the webOS menu and clicking on "More Info". The Carrier should say "Sprint" and the Model should be "P100EWW". If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
To get all the stock Sprint apps back, like Sprint Nav and Sprint TV and to get the Sprint PRL you need to run the regular old, run of the mill Sprint webOS Doctor. (Download here: http://palm.cdnetworks.net/rom/pre/p...0ewwsprint.jar)
Put your phone in recovery mode and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Sprint Pre Plus

2011-01-11T02:34:16Z

Rboatright: /* Step 2: Setup meta-doctor */

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. I simply opened each file in Internalz and wrote the values down in a text file on my laptop.

If you have installed terminal on your pre using Preware or, if you have installed the SDK and have novaterm, you could go to terminal and type the following:

mkdir /media/internal/tokens
cp /tmp/tokens/* /media/internal/tokens

Then, just plug the pre in and copy over the entire tokens folder from your PRE as a usb drive to your desktop.

If you have installed openSSH via Preware, you could use scp or winSCP to do the same thing without the intermediate usb-drive step.

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: [[Application:MetaDoctor]]. However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre>
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. The entire Pre teardown guide is located here for reference: Palm Pre Teardown - Page 2 - iFixit

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken <img width=350>http://guide-images.ifixit.net/igi/bFeIXAZtnVqjBILK.medium</img>
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. you need to pry out a tiny bit and push DOWN towards the keyboard on the four locking tabs. As you do, the keyboard bezel and the keyboard ill seperate from the backplate. The keyboard bezel is VERY THIN. Once you have it started to seperate on both sides, run your plastic wedge or a fingernail around the seperation. To swap JUST the comm board, it is NOT nessessary to pull the volume buttons out, you can leave them in. Now, with the keyboard down a bit, push up on the comm board and it will hinge up towards the top of the phone on its connector cable. The cable unplugs from the flat of the comm board. It does not pull out "parallel" with the cable, it pulls out "perpendicular" to the cable. <img width=350>http://guide-images.ifixit.net/igi/B2J3e3Tv6oKLJe3Y.medium</img>
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here and disconnect the two gps connectors. <img width=350>http://guide-images.ifixit.net/igi/qBW1xicfUSWhZ5VB.medium</img>
# Now, simply apply gentle pressure, and the coms board will pop right out: <img width=350>http://guide-images.ifixit.net/igi/2YgNcQN3dAf6idkE.medium</img>

Coms board removed. Note the cable plug where the comm board was attached on the orange ribbon cable. <img>http://guide-images.ifixit.net/igi/eklF6cnfCxUNTTwl.medium</img>

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.

===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device. When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process (note that there will be multiple odd languages to select- keep this in mind, as it will be useful to us later). Log in to your Palm profile. Once it is setup, the phone will reboot and you will be at your webOS home screen. Note that the carrier should say "Sprint." Confirm that our tokens were properly over-written by going to "Device Info" from the webOS menu and clicking on "More Info". The Carrier should say "Sprint" and the Model should be "P100EWW". If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
To get all the stock Sprint apps back, like Sprint Nav and Sprint TV and to get the Sprint PRL you need to run the regular old, run of the mill Sprint webOS Doctor. (Download here: http://palm.cdnetworks.net/rom/pre/p...0ewwsprint.jar)
Put your phone in recovery mode and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Sprint Pre Plus

2011-01-10T23:57:46Z

Rboatright: /* Step 1: Extract working Sprint Pre Tokens */

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. I simply opened each file in Internalz and wrote the values down in a text file on my laptop.

If you have installed terminal on your pre using Preware or, if you have installed the SDK and have novaterm, you could go to terminal and type the following:

mkdir /media/internal/tokens
cp /tmp/tokens/* /media/internal/tokens

Then, just plug the pre in and copy over the entire tokens folder from your PRE as a usb drive to your desktop.

If you have installed openSSH via Preware, you could use scp or winSCP to do the same thing without the intermediate usb-drive step.

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: [[Application:MetaDoctor]]. However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. The entire Pre teardown guide is located here for reference: Palm Pre Teardown - Page 2 - iFixit

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken <img width=350>http://guide-images.ifixit.net/igi/bFeIXAZtnVqjBILK.medium</img>
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. you need to pry out a tiny bit and push DOWN towards the keyboard on the four locking tabs. As you do, the keyboard bezel and the keyboard ill seperate from the backplate. The keyboard bezel is VERY THIN. Once you have it started to seperate on both sides, run your plastic wedge or a fingernail around the seperation. To swap JUST the comm board, it is NOT nessessary to pull the volume buttons out, you can leave them in. Now, with the keyboard down a bit, push up on the comm board and it will hinge up towards the top of the phone on its connector cable. The cable unplugs from the flat of the comm board. It does not pull out "parallel" with the cable, it pulls out "perpendicular" to the cable. <img width=350>http://guide-images.ifixit.net/igi/B2J3e3Tv6oKLJe3Y.medium</img>
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here and disconnect the two gps connectors. <img width=350>http://guide-images.ifixit.net/igi/qBW1xicfUSWhZ5VB.medium</img>
# Now, simply apply gentle pressure, and the coms board will pop right out: <img width=350>http://guide-images.ifixit.net/igi/2YgNcQN3dAf6idkE.medium</img>

Coms board removed. Note the cable plug where the comm board was attached on the orange ribbon cable. <img>http://guide-images.ifixit.net/igi/eklF6cnfCxUNTTwl.medium</img>

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.

===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device. When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process (note that there will be multiple odd languages to select- keep this in mind, as it will be useful to us later). Log in to your Palm profile. Once it is setup, the phone will reboot and you will be at your webOS home screen. Note that the carrier should say "Sprint." Confirm that our tokens were properly over-written by going to "Device Info" from the webOS menu and clicking on "More Info". The Carrier should say "Sprint" and the Model should be "P100EWW". If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
To get all the stock Sprint apps back, like Sprint Nav and Sprint TV and to get the Sprint PRL you need to run the regular old, run of the mill Sprint webOS Doctor. (Download here: http://palm.cdnetworks.net/rom/pre/p...0ewwsprint.jar)
Put your phone in recovery mode and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Sprint Pre Plus

2011-01-10T23:49:10Z

Rboatright: /* Step 1: Extract working Sprint Pre Tokens */

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. I simply opened each file in Internalz and wrote the values down in a text file on my laptop.

If you have installed terminal on your pre using Preware, you could go to terminal and type the following:

cp /tmp/tokens /media/internal

Then, just plug the pre in and copy over the entire folder from your PRE as a usb drive to your desktop.

If you have installed openSSH via Preware, you could use scp or winSCP to do the same thing without the intermediate usb-drive step.

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: [[Application:MetaDoctor]]. However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. The entire Pre teardown guide is located here for reference: Palm Pre Teardown - Page 2 - iFixit

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken <img width=350>http://guide-images.ifixit.net/igi/bFeIXAZtnVqjBILK.medium</img>
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. you need to pry out a tiny bit and push DOWN towards the keyboard on the four locking tabs. As you do, the keyboard bezel and the keyboard ill seperate from the backplate. The keyboard bezel is VERY THIN. Once you have it started to seperate on both sides, run your plastic wedge or a fingernail around the seperation. To swap JUST the comm board, it is NOT nessessary to pull the volume buttons out, you can leave them in. Now, with the keyboard down a bit, push up on the comm board and it will hinge up towards the top of the phone on its connector cable. The cable unplugs from the flat of the comm board. It does not pull out "parallel" with the cable, it pulls out "perpendicular" to the cable. <img width=350>http://guide-images.ifixit.net/igi/B2J3e3Tv6oKLJe3Y.medium</img>
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here and disconnect the two gps connectors. <img width=350>http://guide-images.ifixit.net/igi/qBW1xicfUSWhZ5VB.medium</img>
# Now, simply apply gentle pressure, and the coms board will pop right out: <img width=350>http://guide-images.ifixit.net/igi/2YgNcQN3dAf6idkE.medium</img>

Coms board removed. Note the cable plug where the comm board was attached on the orange ribbon cable. <img>http://guide-images.ifixit.net/igi/eklF6cnfCxUNTTwl.medium</img>

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.

===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device. When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process (note that there will be multiple odd languages to select- keep this in mind, as it will be useful to us later). Log in to your Palm profile. Once it is setup, the phone will reboot and you will be at your webOS home screen. Note that the carrier should say "Sprint." Confirm that our tokens were properly over-written by going to "Device Info" from the webOS menu and clicking on "More Info". The Carrier should say "Sprint" and the Model should be "P100EWW". If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
To get all the stock Sprint apps back, like Sprint Nav and Sprint TV and to get the Sprint PRL you need to run the regular old, run of the mill Sprint webOS Doctor. (Download here: http://palm.cdnetworks.net/rom/pre/p...0ewwsprint.jar)
Put your phone in recovery mode and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Sprint Pre Plus

2011-01-10T23:18:39Z

Rboatright: /* Step 3. Remove your Sprint Pre com board */

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. I simply opened each file in Internalz and wrote the values down in a text file on my laptop.

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: [[Application:MetaDoctor]]. However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. The entire Pre teardown guide is located here for reference: Palm Pre Teardown - Page 2 - iFixit

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken <img width=350>http://guide-images.ifixit.net/igi/bFeIXAZtnVqjBILK.medium</img>
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. you need to pry out a tiny bit and push DOWN towards the keyboard on the four locking tabs. As you do, the keyboard bezel and the keyboard ill seperate from the backplate. The keyboard bezel is VERY THIN. Once you have it started to seperate on both sides, run your plastic wedge or a fingernail around the seperation. To swap JUST the comm board, it is NOT nessessary to pull the volume buttons out, you can leave them in. Now, with the keyboard down a bit, push up on the comm board and it will hinge up towards the top of the phone on its connector cable. The cable unplugs from the flat of the comm board. It does not pull out "parallel" with the cable, it pulls out "perpendicular" to the cable. <img width=350>http://guide-images.ifixit.net/igi/B2J3e3Tv6oKLJe3Y.medium</img>
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here and disconnect the two gps connectors. <img width=350>http://guide-images.ifixit.net/igi/qBW1xicfUSWhZ5VB.medium</img>
# Now, simply apply gentle pressure, and the coms board will pop right out: <img width=350>http://guide-images.ifixit.net/igi/2YgNcQN3dAf6idkE.medium</img>

Coms board removed. Note the cable plug where the comm board was attached on the orange ribbon cable. <img>http://guide-images.ifixit.net/igi/eklF6cnfCxUNTTwl.medium</img>

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.

===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device. When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process (note that there will be multiple odd languages to select- keep this in mind, as it will be useful to us later). Log in to your Palm profile. Once it is setup, the phone will reboot and you will be at your webOS home screen. Note that the carrier should say "Sprint." Confirm that our tokens were properly over-written by going to "Device Info" from the webOS menu and clicking on "More Info". The Carrier should say "Sprint" and the Model should be "P100EWW". If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
To get all the stock Sprint apps back, like Sprint Nav and Sprint TV and to get the Sprint PRL you need to run the regular old, run of the mill Sprint webOS Doctor. (Download here: http://palm.cdnetworks.net/rom/pre/p...0ewwsprint.jar)
Put your phone in recovery mode and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Sprint Pre Plus

2011-01-10T23:16:52Z

Rboatright: /* Step 3. Remove your Sprint Pre com board */

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. I simply opened each file in Internalz and wrote the values down in a text file on my laptop.

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: [[Application:MetaDoctor]]. However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. The entire Pre teardown guide is located here for reference: Palm Pre Teardown - Page 2 - iFixit

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken <img width=350>http://guide-images.ifixit.net/igi/bFeIXAZtnVqjBILK.medium</img>
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. you need to pry out a tiny bit and push DOWN towards the keyboard on the four locking tabs. As you do, the keyboard bezel and the keyboard ill seperate from the backplate. The keyboard bezel is VERY THIN. Once you have it started to seperate on both sides, run your plastic wedge or a fingernail around the seperation. To swap JUST the comm board, it is NOT nessessary to pull the volume buttons out, you can leave them in. Now, with the keyboard down a bit, push up on the comm board and it will hinge up towards the top of the phone on its connector cable. The cable unplugs from the flat of the comm board. It does not pull out "parallel" with the cable, it pulls out "perpendicular" to the cable. <img width=350>http://guide-images.ifixit.net/igi/B2J3e3Tv6oKLJe3Y.medium</img>
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here and disconnect the two gps connectors. <img width=350>http://guide-images.ifixit.net/igi/qBW1xicfUSWhZ5VB.medium</img>
# Now, simply apply gentle pressure, and the coms board will pop right out: <img width=350>http://guide-images.ifixit.net/igi/2YgNcQN3dAf6idkE.medium</img>

Coms board removed: <img>http://guide-images.ifixit.net/igi/eklF6cnfCxUNTTwl.medium</img>

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.

===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device. When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process (note that there will be multiple odd languages to select- keep this in mind, as it will be useful to us later). Log in to your Palm profile. Once it is setup, the phone will reboot and you will be at your webOS home screen. Note that the carrier should say "Sprint." Confirm that our tokens were properly over-written by going to "Device Info" from the webOS menu and clicking on "More Info". The Carrier should say "Sprint" and the Model should be "P100EWW". If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
To get all the stock Sprint apps back, like Sprint Nav and Sprint TV and to get the Sprint PRL you need to run the regular old, run of the mill Sprint webOS Doctor. (Download here: http://palm.cdnetworks.net/rom/pre/p...0ewwsprint.jar)
Put your phone in recovery mode and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Sprint Pre Plus

2011-01-10T22:51:32Z

Rboatright: /* Step 2: Setup meta-doctor */

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. I simply opened each file in Internalz and wrote the values down in a text file on my laptop.

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: [[Application:MetaDoctor]]. However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. The entire Pre teardown guide is located here for reference: Palm Pre Teardown - Page 2 - iFixit

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken <img width=350>http://guide-images.ifixit.net/igi/bFeIXAZtnVqjBILK.medium</img>
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. Separate them as so: <img width=350>http://guide-images.ifixit.net/igi/B2J3e3Tv6oKLJe3Y.medium</img>
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here: <img width=350>http://guide-images.ifixit.net/igi/qBW1xicfUSWhZ5VB.medium</img>
# Now, simply apply gentle pressure, and the coms board will pop right out: <img width=350>http://guide-images.ifixit.net/igi/2YgNcQN3dAf6idkE.medium</img>

Coms board removed: <img>http://guide-images.ifixit.net/igi/eklF6cnfCxUNTTwl.medium</img>

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.

===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device. When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process (note that there will be multiple odd languages to select- keep this in mind, as it will be useful to us later). Log in to your Palm profile. Once it is setup, the phone will reboot and you will be at your webOS home screen. Note that the carrier should say "Sprint." Confirm that our tokens were properly over-written by going to "Device Info" from the webOS menu and clicking on "More Info". The Carrier should say "Sprint" and the Model should be "P100EWW". If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
To get all the stock Sprint apps back, like Sprint Nav and Sprint TV and to get the Sprint PRL you need to run the regular old, run of the mill Sprint webOS Doctor. (Download here: http://palm.cdnetworks.net/rom/pre/p...0ewwsprint.jar)
Put your phone in recovery mode and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Sprint Pre Plus

2011-01-10T22:36:15Z

Rboatright: /* Step 3. Remove your Sprint Pre com board */

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. I simply opened each file in Internalz and wrote the values down in a text file on my laptop.

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: Cross-Platform Meta-Doctor Guide (bypass carrier activation, etc.). However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. The entire Pre teardown guide is located here for reference: Palm Pre Teardown - Page 2 - iFixit

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken <img width=350>http://guide-images.ifixit.net/igi/bFeIXAZtnVqjBILK.medium</img>
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. Separate them as so: <img width=350>http://guide-images.ifixit.net/igi/B2J3e3Tv6oKLJe3Y.medium</img>
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here: <img width=350>http://guide-images.ifixit.net/igi/qBW1xicfUSWhZ5VB.medium</img>
# Now, simply apply gentle pressure, and the coms board will pop right out: <img width=350>http://guide-images.ifixit.net/igi/2YgNcQN3dAf6idkE.medium</img>

Coms board removed: <img>http://guide-images.ifixit.net/igi/eklF6cnfCxUNTTwl.medium</img>

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.

===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device. When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process (note that there will be multiple odd languages to select- keep this in mind, as it will be useful to us later). Log in to your Palm profile. Once it is setup, the phone will reboot and you will be at your webOS home screen. Note that the carrier should say "Sprint." Confirm that our tokens were properly over-written by going to "Device Info" from the webOS menu and clicking on "More Info". The Carrier should say "Sprint" and the Model should be "P100EWW". If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
To get all the stock Sprint apps back, like Sprint Nav and Sprint TV and to get the Sprint PRL you need to run the regular old, run of the mill Sprint webOS Doctor. (Download here: http://palm.cdnetworks.net/rom/pre/p...0ewwsprint.jar)
Put your phone in recovery mode and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Sprint Pre Plus

2011-01-10T22:22:22Z

Rboatright: /* Step 3. Remove your Sprint Pre com board */ external photos linked

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. I simply opened each file in Internalz and wrote the values down in a text file on my laptop.

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: Cross-Platform Meta-Doctor Guide (bypass carrier activation, etc.). However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. The entire Pre teardown guide is located here for reference: Palm Pre Teardown - Page 2 - iFixit

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken http://guide-images.ifixit.net/igi/bFeIXAZtnVqjBILK.medium
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. Separate them as so: http://guide-images.ifixit.net/igi/B2J3e3Tv6oKLJe3Y.medium
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here: http://guide-images.ifixit.net/igi/qBW1xicfUSWhZ5VB.medium
# Now, simply apply gentle pressure, and the coms board will pop right out: http://guide-images.ifixit.net/igi/2YgNcQN3dAf6idkE.medium

Coms board removed: http://guide-images.ifixit.net/igi/eklF6cnfCxUNTTwl.medium

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.

===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device. When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process (note that there will be multiple odd languages to select- keep this in mind, as it will be useful to us later). Log in to your Palm profile. Once it is setup, the phone will reboot and you will be at your webOS home screen. Note that the carrier should say "Sprint." Confirm that our tokens were properly over-written by going to "Device Info" from the webOS menu and clicking on "More Info". The Carrier should say "Sprint" and the Model should be "P100EWW". If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
To get all the stock Sprint apps back, like Sprint Nav and Sprint TV and to get the Sprint PRL you need to run the regular old, run of the mill Sprint webOS Doctor. (Download here: http://palm.cdnetworks.net/rom/pre/p...0ewwsprint.jar)
Put your phone in recovery mode and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Sprint Pre Plus

2011-01-10T22:07:51Z

Rboatright: Undo revision 12645 by Rboatright (Talk)

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. I simply opened each file in Internalz and wrote the values down in a text file on my laptop.

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: Cross-Platform Meta-Doctor Guide (bypass carrier activation, etc.). However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. The entire Pre teardown guide is located here for reference: Palm Pre Teardown - Page 2 - iFixit

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. Separate them as so:
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here:
# Now, simply apply gentle pressure, and the coms board will pop right out:

Coms board removed:

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.
===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device. When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process (note that there will be multiple odd languages to select- keep this in mind, as it will be useful to us later). Log in to your Palm profile. Once it is setup, the phone will reboot and you will be at your webOS home screen. Note that the carrier should say "Sprint." Confirm that our tokens were properly over-written by going to "Device Info" from the webOS menu and clicking on "More Info". The Carrier should say "Sprint" and the Model should be "P100EWW". If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
To get all the stock Sprint apps back, like Sprint Nav and Sprint TV and to get the Sprint PRL you need to run the regular old, run of the mill Sprint webOS Doctor. (Download here: http://palm.cdnetworks.net/rom/pre/p...0ewwsprint.jar)
Put your phone in recovery mode and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Sprint Pre Plus

2011-01-10T22:06:15Z

Rboatright: /* Step 3. Remove your Sprint Pre com board */

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. I simply opened each file in Internalz and wrote the values down in a text file on my laptop.

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: Cross-Platform Meta-Doctor Guide (bypass carrier activation, etc.). However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. The entire Pre teardown guide is located here for reference: Palm Pre Teardown - Page 2 - iFixit

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken <image src="http://guide-images.ifixit.net/igi/bFeIXAZtnVqjBILK.medium">
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. Separate them as so:
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here:
# Now, simply apply gentle pressure, and the coms board will pop right out:

Coms board removed:

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.

===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device. When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process (note that there will be multiple odd languages to select- keep this in mind, as it will be useful to us later). Log in to your Palm profile. Once it is setup, the phone will reboot and you will be at your webOS home screen. Note that the carrier should say "Sprint." Confirm that our tokens were properly over-written by going to "Device Info" from the webOS menu and clicking on "More Info". The Carrier should say "Sprint" and the Model should be "P100EWW". If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
To get all the stock Sprint apps back, like Sprint Nav and Sprint TV and to get the Sprint PRL you need to run the regular old, run of the mill Sprint webOS Doctor. (Download here: http://palm.cdnetworks.net/rom/pre/p...0ewwsprint.jar)
Put your phone in recovery mode and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Sprint Pre Plus

2011-01-10T22:05:02Z

Rboatright: Created page with 'This page is derived from the thread at [http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.pr…'

This page is derived from the thread at
[http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html http://forums.precentral.net/palm-pre-tips-information-resources/259077-pre-plus-sprint-step-step-conversion-guide.html]

This guide will allow you to get a Palm Pre Plus working on Sprint, assuming you already have an activated Sprint Pre. Using this guide, you will end up with a Palm Pre Plus activated on Sprint, with an entirely stock software installation. The included stock Sprint applications will work (SprintNav, Sprint TV). Your purchased applications from the app store will be re-downloaded automatically OTA.

== Requirements ==
# Activated Sprint Pre
# Palm Pre Plus- It can be Verizon or AT&T, it doesn't matter. It also doesn't really matter if the ESN is clean or not, I used a brand new Pre Plus I got off Craigslist with a clean ESN, however the ones with bad ESN's tend to be cheaper on Craigslist or Ebay. Buy whatever you can get the best deal on.
# T5 screwdriver (required to disassemble phones)
# Meta-Doctor (get it here Application:MetaDoctor - WebOS Internals)
# The most important requirement: the understanding that if done incorrectly, you can end up with TWO broken phones or malfunctioning phones. The Pre is *NOT* an easy device to disassemble and especially to re-assemble. A moderately high level of confidence and competence with electronics is required to attempt this.

==Process==

===Step 1: Extract working Sprint Pre Tokens===
The tokens on your Sprint Pre are located at /tmp/tokens on your device. The values we want to extract are ProdSN, ModemSN, BATToRSP, BATToCH, DMSVRoNONCE, DMSVRoAUTHPW, DMCLoNONCE, DMCLoAUTHPW, DMCLoAUTHNAME, DMCARRIER, DMMODEL, WIFIoADDR, BToADDR, PalmSN, PRODoID, PN. Each token is represented by a file with that exact name, and the value is contained in the file. I simply opened each file in Internalz and wrote the values down in a text file on my laptop.

===Step 2: Setup meta-doctor===
This is actually sort of tricky and the setup process is a little different for each operating system you are running on. I recommend following the directions located here: Cross-Platform Meta-Doctor Guide (bypass carrier activation, etc.). However, there are a few little things that need to be done to do what we are trying to do. I will summarize the steps that we are taking with meta-doctor. Read these steps first, BEFORE setting up meta-doctor. All the initial icky steps on the meta-doctor setup involve getting the proper UNIX architecture setup to run the shell scripts that comprise meta-doctor (installing git, etc). I will not summarize those steps here (they are well-documented elsewhere and OS-dependent). However, once you have the basic packages installed and in place, do the following things:

<ol><li> Modify your makefile. The makefile is located in the "meta-doctor" directory and is called "Makefile". Open it in your favorite text editor. We are going to remove the carrier check (since VZ and AT&T carriers will NOT work with the regular Sprint webOS Doctor) and we are going to remove the model check (since there is no such thing as a Pre Plus on Sprint). To do this, remove the "#" symbol next to "REMOVE_MODEL_CHECK = 1" and "REMOVE_CARRIER_CHECK = 1". You will also need to set "DEVICE" to "pre" (no quotes) and "CARRIER" to "sprint" (no quotes)- exactly as below. Your makefile should now look like this (changes noted in bold for legibility):
<pre>
##########################
## END OF DOCUMENTATION ##
##########################

########################################
## START OF AREA FOR END USER CHANGES ##
########################################

# Uncomment the features that you wish to enable below:
# BYPASS_ACTIVATION = 1
# BYPASS_FIRST_USE_APP = 1
# ENABLE_DEVELOPER_MODE = 1
# DISABLE_UPLOAD_DAEMON = 1
# INCREASE_VAR_SPACE = 1
# ENABLE_USB_NETWORKING = 1
# INSTALL_SSH_AUTH_KEYS = 1
REMOVE_CARRIER_CHECK = 1
REMOVE_MODEL_CHECK = 1
# DISABLE_MODEM_UPDATE = 1
# CHANGE_KEYBOARD_TYPE = z

# Select "pre", or "pixi".
DEVICE = pre

# Select "sprint", "bellmo", "telcel", "verizonwireless" or "wr".
CARRIER = sprint

######################################
## END OF AREA FOR END USER CHANGES ##
######################################
</pre>
Save your modified makefile and close your text editor.

</li><li> Unpack and Patch meta-doctor. Since we are going to import our Sprint tokens into meta-doctor, we need to build meta-doctor in a stepwise process, and insert the tokens at the proper time. Do NOT simply run 'make DEVICE=pre all-sprint'. This will NOT work. From the command line, and within the meta-doctor folder, run 'make unpack':
<pre>make unpack</pre
After this command has finished, run 'make patch':
<pre>make patch</pre>
</li><li> Import tokens into castle.xml and package meta-doctor. We are now going to add your Sprint Pre tokens into meta-doctor and build the customized version of webOS Doctor that will write your Sprint tokens to your Pre Plus and remove the Carrier and Model checks. To do this, open the castle.xml file, which will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webOS/castle.xml. (Or you can just use the search function on your computer, haha). Open castle.xml in your favorite text editor. Locate the tokens section, which will look like this:
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
</Section>
</pre>
The new section will look like this (thanks jhoff80!):
<pre>
<Section name="tokens" type="token" size="4KB">
<Val name="installer" value="trenchcoat"/>
<Val name="ProdSN" action="overwrite" value="x"/>
<Val name="ModemSN" action="overwrite" value="X"/>
<Val name="BATToRSP" action="overwrite" value="x"/>
<Val name="BATToCH" action="overwrite" value="x"/>
<Val name="DMSVRoNONCE" action="overwrite" value="x"/>
<Val name="DMSVRoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoNONCE" action="overwrite" value="x"/>
<Val name="DMCLoAUTHPW" action="overwrite" value="x"/>
<Val name="DMCLoAUTHNAME" action="overwrite" value="x"/>
<Val name="DMCARRIER" action="overwrite" value="x"/>
<Val name="DMMODEL" action="overwrite" value="x"/>
<Val name="WIFIoADDR" action="overwrite" value="x"/>
<Val name="BToADDR" action="overwrite" value="x"/>
<Val name="PalmSN" action="overwrite" value="x"/>
<Val name="PRODoID" action="overwrite" value="x"/>
<Val name="PN" action="overwrite" value="x"/>
</Section>
</pre>
Where the X's are located, insert the corresponding token values that you extracted at the beginning of this guide. Leave the quotes in place. Once you have completed this step, save the XML file and close your text editor. Go back to the command line and run 'make pack'
<pre>make pack</pre>
Your new webOS doctor is now all packaged up and ready to go, and will be located in meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Now that the software is all setup, we are ready to begin the hardware surgery!
</li></ol>

=== Step 3. Remove your Sprint Pre com board===
So this is the part where you can actually damage your device. So, as one last form of warning, I will say, DANGER WILL ROBINSON! If you are not comfortable with the possibility of destroying a perfectly nice Sprint Pre or are not comfortable disassembling tiny electronics, STOP NOW, go out and see Inception or something (great movie!). Otherwise, let's proceed. The entire Pre teardown guide is located here for reference: Palm Pre Teardown - Page 2 - iFixit

# Remove the 6 back screws. Remove the back cover of your Sprint Pre and remove the battery. Using a T5 screwdriver, remove the 6 screws. The screw in the upper right corner has a small "Palm" sticker on it, probably to void your warranty if broken
# Gently separate the backplate. There are interlocking plastic tabs securing the backplate. Separate them as so:
# Remove the coms board. As opposed to the iFixit guide, you actually do not need to fully separate the backplate from the rest of the phone (which involves disassembling the volume rocker). If you are able to release the bottom section of the Pre's backplate and the 4 side plastic interlockers, you should be able to elevate the backplate enough to get access to the coms board. To remove the coms board, first gently reflect back the small plate covering the GPS connectors, as shown here:
# Now, simply apply gentle pressure, and the coms board will pop right out:

Coms board removed:

'''Congratulations!''' You have now removed the Sprint Pre coms board! You are now ready to install it in your Pre Plus. PLEASE NOTE: The Pre is *NOT* an easy device to re-assemble, and although the coms board will be missing, I *highly* recommend practicing the re-assembly of the Sprint Pre a couple times to make sure you are able to get it to fit together nicely and the slider action is good, to ensure when you re-assemble the Pre Plus, it is of the highest quality.
===Step 4: Swap Sprint Pre coms board into Pre Plus===
So you've made it this far have you, Dr. Frankenstein! Excellent! Now, disassemble your Pre Plus by following the disassembly instructions detailed above. Remove the Pre Plus coms board. Insert your Sprint Pre coms board by pressing it into place, ensuring that the two connectors on the board push into place. Re-connect the two GPS wires on the inside of the case to the coms board. Re-assemble your Pre Plus.

===Step 5: Re-program your Pre Plus using meta-doctor===
Remember all that time we spent getting meta-doctor setup? Well, now the time has come to make use of it. Put your Pre Plus in recovery mode by holding the volume rocker in the 'up' position and while holding it, press and hold the power button. A USB icon should appear on the Pre Plus' screen. Navigate to your custom meta-doctor located at meta-doctor/build/pre-p100eww-sprint-1.4.5/webosdoctorp100ewwsprint-1.4.5.jar. Run the JAR file and doctor your device. When that has completed, your phone will reboot and the "first use app" will run. Go ahead and go through the setup process (note that there will be multiple odd languages to select- keep this in mind, as it will be useful to us later). Log in to your Palm profile. Once it is setup, the phone will reboot and you will be at your webOS home screen. Note that the carrier should say "Sprint." Confirm that our tokens were properly over-written by going to "Device Info" from the webOS menu and clicking on "More Info". The Carrier should say "Sprint" and the Model should be "P100EWW". If either of these values are wrong (most like Carrier: Verizon or Model: P101EWW), then the tokens did not write correctly, and most likely, you made an error properly rolling castle.xml into meta-doctor. If the values are correct, you are now ready get yourself a standard Sprint install.

===Step 6: Run regular Sprint webOS Doctor 1.4.5.===
To get all the stock Sprint apps back, like Sprint Nav and Sprint TV and to get the Sprint PRL you need to run the regular old, run of the mill Sprint webOS Doctor. (Download here: http://palm.cdnetworks.net/rom/pre/p...0ewwsprint.jar)
Put your phone in recovery mode and run the regular Sprint webOS Doctor. If your tokens are wrong, you will get an error saying that your device is not compatible with this version of webOS Doctor. If the info you verified in Step 5 is correct, the webOS Doctor will run without difficulty and you will end up with a stock Sprint install on your Pre Plus. You will be able to note this immediately on the first use app, as there will only be TWO language options (English and Spanish), rather than many.

===Step 7: Have a beer! You've earned it. ===
Also, be sure to install Preware and all the other goodies you want!

Special Thanks: rwhitby (for meta-doctor, Preware); jhoff80 (for castle.xml configuration), ifixit (for teardown images).

Portal:Hardware

2011-01-10T21:57:07Z

Rboatright:

__notoc__
{{portal-header|
Just list everything related to the hardware. <br>
Title pages: '''Hardware [description]'''
}}
'''[[:Category:Hardware|All pages in Category:Hardware]]'''

* [[Move a Pre- to a Pre+ on Sprint]]
* [[External Battery Pack]]
* [[A2dp]]
* [[Accelerometer]]
* [[Ambient Light Sensor]]
* [[Bluetooth Research]]
* [[GPS]]
* [[Hardware]]
* [[Hardware issues]]
* [[IR Proximity Sensor]]
* [[Controlling LEDs from the Shell|LEDS: Control from the shell]]
* [[More on Leds|LEDS: More information]]
* [[OMAP vibration device|OMAP vibration device]]
* [[Torch/Flash|Torch/Flash]]
* [[USB]]
* [[WLAN|WLAN / WIFI]]
* [[Touchscreen]]
* [[Temperature Sensor]]
* [[Camera]]
* [[Battery]]
* [[PalmPre2HardwareAndDriversInformations| Hardware and drivers used in the palm-pre 2, and how different it is from the palm-pre]]
* [[Debug-Testpads]]

PDK on Linux

2010-12-28T17:39:02Z

Rboatright: /* Prerequisites */

The official Palm PDK development kit for writing native programs is not supported on Linux.

The instructions on this page should allow you to get the official Palm webOS PDK for OSX working on Linux.

It's totally untested other than running a few scripts and confirming that things seem to be where they should be, so please confirm if it works for you.

==Prerequisites==
* Get the command line tool "xar". Some debian based systems have it, try apt-get install xar. If not found, get it from http://code.google.com/p/xar/ (I needed package libxml2-dev to compile it)
* You will need to have git installed to retrieve files from the WIDK repository.
* Since you're planning to write native software for webOS, this assumes you have things like gcc and make and normal developer stuff like that.

We will be using tools found in theWIDK cross-compile repository is really helpful as it already has functionality to download and extract the OSX PDK, most of which will "just work" on Linux. Tools found in the WIDK repository can also download the CodeSourcery toolchain for Linux to replace the one included in the PDK, built for Darwin.

==Setup==
===Get the Palm PDK using the Webos-Internals makefile===

This downloads Palm's DMG file, downloads and patches a tool for converting DMG's, and runs it against the Palm DMG, ending up with a Xar format package file. (filename ends in .pkg)

<pre style="margin-left:50px;">
git clone git://git.webos-internals.org/preware/cross-compile.git
cd cross-compile
make doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg
</pre>

You now have a Palm_webOS_SDK-Mac-1.4.5.465.pkg in doctors/ .

===Extract that .pkg file===

Now let's extract it into / (this will create /opt/PalmPDK)

<pre style="margin-left:50px;">
xar -xf doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg palmpdk.pkg
sudo sh -c 'gzip -cd palmpdk.pkg/Payload | (cd /; cpio -i)'
</pre>

You now have a Palm PDK in /opt/PalmPDK, but you don't have a working cross-compile toolchain, because the one Palm supplied was for osX / Darwin not Linux. We need to fix that.

===Get CodeSourcery Linux cross-compiler===
Install the CodeSourcery Linux cross-compiler toolchain where Palm's toolchain built for OSX was.

<pre style="margin-left:50px">
make toolchain
sudo cp -r toolchain/arm-2007q3 /opt/PalmPDK
cd /opt/PalmPDK
sudo mv arm-gcc arm-gcc-darwin
sudo ln -s arm-2007q3 arm-gcc
</pre>

Someone who is familiar with the PDK should test this at this point to see if you can actually use it in the proper ways.

PDK on Linux

2010-12-28T17:32:13Z

Rboatright: /* Prerequisites */

The official Palm PDK development kit for writing native programs is not supported on Linux.

The instructions on this page should allow you to get the official Palm webOS PDK for OSX working on Linux.

It's totally untested other than running a few scripts and confirming that things seem to be where they should be, so please confirm if it works for you.

==Prerequisites==
Get the command line tool "xar". Some debian based systems have it, try apt-get install xar. If not found, get it from http://code.google.com/p/xar/ (I needed package libxml2-dev to compile it)

You will need to have git installed to retrieve files from the WIDK repository.

Since you're planning to write native software for webOS, this assumes you have things like gcc and make and normal developer stuff like that.

We will be using tools found in theWIDK cross-compile repository is really helpful as it already has functionality to download and extract the OSX PDK, most of which will "just work" on Linux. Tools found in the WIDK repository can also download the CodeSourcery toolchain for Linux to replace the one included in the PDK, built for Darwin.

==Setup==
===Get the Palm PDK using the Webos-Internals makefile===

This downloads Palm's DMG file, downloads and patches a tool for converting DMG's, and runs it against the Palm DMG, ending up with an IPKG .pkg package file.

<pre style="margin-left:50px;">
git clone git://git.webos-internals.org/preware/cross-compile.git
cd cross-compile
make doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg
</pre>

You now have a Palm_webOS_SDK-Mac-1.4.5.465.pkg in doctors/ .

===Extract that .pkg file===

Now let's extract it into / (this will create /opt/PalmPDK)

<pre style="margin-left:50px;">
xar -xf doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg palmpdk.pkg
sudo sh -c 'gzip -cd palmpdk.pkg/Payload | (cd /; cpio -i)'
</pre>

You now have a Palm PDK in /opt/PalmPDK, but you don't have a working cross-compile toolchain, because the one Palm supplied was for osX / Darwin not Linux. We need to fix that.

===Get CodeSourcery Linux cross-compiler===
Install the CodeSourcery Linux cross-compiler toolchain where Palm's toolchain built for OSX was.

<pre style="margin-left:50px">
make toolchain
sudo cp -r toolchain/arm-2007q3 /opt/PalmPDK
cd /opt/PalmPDK
sudo mv arm-gcc arm-gcc-darwin
sudo ln -s arm-2007q3 arm-gcc
</pre>

Someone who is familiar with the PDK should test this at this point to see if you can actually use it in the proper ways.

PDK on Linux

2010-12-28T17:27:32Z

Rboatright: /* Prerequisites */

The official Palm PDK development kit for writing native programs is not supported on Linux.

The instructions on this page should allow you to get the official Palm webOS PDK for OSX working on Linux.

It's totally untested other than running a few scripts and confirming that things seem to be where they should be, so please confirm if it works for you.

==Prerequisites==
Get the command line tool "xar". Some debian based systems have it, try apt-get install xar. If not found, get it from http://code.google.com/p/xar/ (I needed package libxml2-dev to compile it)

You will need to have git installed to retrieve files from the WIDK repository.

We will be using tools found in theWIDK cross-compile repository is really helpful as it already has functionality to download and extract the OSX PDK, most of which will "just work" on Linux. Tools found in the WIDK repository can also download the CodeSourcery toolchain for Linux to replace the one included in the PDK, built for Darwin.

==Setup==
===Get the Palm PDK using the Webos-Internals makefile===

This downloads Palm's DMG file, downloads and patches a tool for converting DMG's, and runs it against the Palm DMG, ending up with an IPKG .pkg package file.

<pre style="margin-left:50px;">
git clone git://git.webos-internals.org/preware/cross-compile.git
cd cross-compile
make doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg
</pre>

You now have a Palm_webOS_SDK-Mac-1.4.5.465.pkg in doctors/ .

===Extract that .pkg file===

Now let's extract it into / (this will create /opt/PalmPDK)

<pre style="margin-left:50px;">
xar -xf doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg palmpdk.pkg
sudo sh -c 'gzip -cd palmpdk.pkg/Payload | (cd /; cpio -i)'
</pre>

You now have a Palm PDK in /opt/PalmPDK, but you don't have a working cross-compile toolchain, because the one Palm supplied was for osX / Darwin not Linux. We need to fix that.

===Get CodeSourcery Linux cross-compiler===
Install the CodeSourcery Linux cross-compiler toolchain where Palm's toolchain built for OSX was.

<pre style="margin-left:50px">
make toolchain
sudo cp -r toolchain/arm-2007q3 /opt/PalmPDK
cd /opt/PalmPDK
sudo mv arm-gcc arm-gcc-darwin
sudo ln -s arm-2007q3 arm-gcc
</pre>

Someone who is familiar with the PDK should test this at this point to see if you can actually use it in the proper ways.

PDK on Linux

2010-12-28T17:25:17Z

Rboatright: /* Extract that .pkg file */

The official Palm PDK development kit for writing native programs is not supported on Linux.

The instructions on this page should allow you to get the official Palm webOS PDK for OSX working on Linux.

It's totally untested other than running a few scripts and confirming that things seem to be where they should be, so please confirm if it works for you.

==Prerequisites==
Get the command line tool "xar". Some debian based systems have it, try apt-get install xar. If not found, get it from http://code.google.com/p/xar/ (I needed package libxml2-dev to compile it)

WIDK cross-compile repository is really helpful as it already has functionality to download and extract the OSX PDK, most of which will "just work" on Linux. It can also download the CodeSourcery toolchain for Linux to replace the one included in the PDK, built for Darwin.

==Setup==
===Get the Palm PDK using the Webos-Internals makefile===

This downloads Palm's DMG file, downloads and patches a tool for converting DMG's, and runs it against the Palm DMG, ending up with an IPKG .pkg package file.

<pre style="margin-left:50px;">
git clone git://git.webos-internals.org/preware/cross-compile.git
cd cross-compile
make doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg
</pre>

You now have a Palm_webOS_SDK-Mac-1.4.5.465.pkg in doctors/ .

===Extract that .pkg file===

Now let's extract it into / (this will create /opt/PalmPDK)

<pre style="margin-left:50px;">
xar -xf doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg palmpdk.pkg
sudo sh -c 'gzip -cd palmpdk.pkg/Payload | (cd /; cpio -i)'
</pre>

You now have a Palm PDK in /opt/PalmPDK, but you don't have a working cross-compile toolchain, because the one Palm supplied was for osX / Darwin not Linux. We need to fix that.

===Get CodeSourcery Linux cross-compiler===
Install the CodeSourcery Linux cross-compiler toolchain where Palm's toolchain built for OSX was.

<pre style="margin-left:50px">
make toolchain
sudo cp -r toolchain/arm-2007q3 /opt/PalmPDK
cd /opt/PalmPDK
sudo mv arm-gcc arm-gcc-darwin
sudo ln -s arm-2007q3 arm-gcc
</pre>

Someone who is familiar with the PDK should test this at this point to see if you can actually use it in the proper ways.

PDK on Linux

2010-12-28T17:23:39Z

Rboatright: /* Get the Webos-Internals WIDK cross-compile toolchain */

The official Palm PDK development kit for writing native programs is not supported on Linux.

The instructions on this page should allow you to get the official Palm webOS PDK for OSX working on Linux.

It's totally untested other than running a few scripts and confirming that things seem to be where they should be, so please confirm if it works for you.

==Prerequisites==
Get the command line tool "xar". Some debian based systems have it, try apt-get install xar. If not found, get it from http://code.google.com/p/xar/ (I needed package libxml2-dev to compile it)

WIDK cross-compile repository is really helpful as it already has functionality to download and extract the OSX PDK, most of which will "just work" on Linux. It can also download the CodeSourcery toolchain for Linux to replace the one included in the PDK, built for Darwin.

==Setup==
===Get the Palm PDK using the Webos-Internals makefile===

This downloads Palm's DMG file, downloads and patches a tool for converting DMG's, and runs it against the Palm DMG, ending up with an IPKG .pkg package file.

<pre style="margin-left:50px;">
git clone git://git.webos-internals.org/preware/cross-compile.git
cd cross-compile
make doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg
</pre>

You now have a Palm_webOS_SDK-Mac-1.4.5.465.pkg in doctors/ .

===Extract that .pkg file===

Now let's extract it into / (this will create /opt/PalmPDK)

<pre style="margin-left:50px;">
xar -xf doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg palmpdk.pkg
sudo sh -c 'gzip -cd palmpdk.pkg/Payload | (cd /; cpio -i)'
</pre>

===Get CodeSourcery Linux cross-compiler===
Install the CodeSourcery Linux cross-compiler toolchain where Palm's toolchain built for OSX was.

<pre style="margin-left:50px">
make toolchain
sudo cp -r toolchain/arm-2007q3 /opt/PalmPDK
cd /opt/PalmPDK
sudo mv arm-gcc arm-gcc-darwin
sudo ln -s arm-2007q3 arm-gcc
</pre>

Someone who is familiar with the PDK should test this at this point to see if you can actually use it in the proper ways.

PDK on Linux

2010-12-28T17:15:16Z

Rboatright: /* Get the Webos-Internals WIDK */

The official Palm PDK development kit for writing native programs is not supported on Linux.

The instructions on this page should allow you to get the official Palm webOS PDK for OSX working on Linux.

It's totally untested other than running a few scripts and confirming that things seem to be where they should be, so please confirm if it works for you.

==Prerequisites==
Get the command line tool "xar". Some debian based systems have it, try apt-get install xar. If not found, get it from http://code.google.com/p/xar/ (I needed package libxml2-dev to compile it)

WIDK cross-compile repository is really helpful as it already has functionality to download and extract the OSX PDK, most of which will "just work" on Linux. It can also download the CodeSourcery toolchain for Linux to replace the one included in the PDK, built for Darwin.

==Setup==
===Get the Webos-Internals WIDK cross-compile toolchain===

<pre style="margin-left:50px;">
git clone git://git.webos-internals.org/preware/cross-compile.git
cd cross-compile
make doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg
</pre>

You now have a Palm_webOS_SDK-Mac-1.4.5.465.pkg in doctors/ . Now let's extract it into / (this will create /opt/PalmPDK)

<pre style="margin-left:50px;">
xar -xf doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg palmpdk.pkg
sudo sh -c 'gzip -cd palmpdk.pkg/Payload | (cd /; cpio -i)'
</pre>

===Get CodeSourcery Linux cross-compiler===
Install the CodeSourcery Linux cross-compiler toolchain where Palm's toolchain built for OSX was.

<pre style="margin-left:50px">
make toolchain
sudo cp -r toolchain/arm-2007q3 /opt/PalmPDK
cd /opt/PalmPDK
sudo mv arm-gcc arm-gcc-darwin
sudo ln -s arm-2007q3 arm-gcc
</pre>

Someone who is familiar with the PDK should test this at this point to see if you can actually use it in the proper ways.

PDK on Linux

2010-12-28T17:14:32Z

Rboatright: /* Get the Webos-Internals WIDK */

The official Palm PDK development kit for writing native programs is not supported on Linux.

The instructions on this page should allow you to get the official Palm webOS PDK for OSX working on Linux.

It's totally untested other than running a few scripts and confirming that things seem to be where they should be, so please confirm if it works for you.

==Prerequisites==
Get the command line tool "xar". Some debian based systems have it, try apt-get install xar. If not found, get it from http://code.google.com/p/xar/ (I needed package libxml2-dev to compile it)

WIDK cross-compile repository is really helpful as it already has functionality to download and extract the OSX PDK, most of which will "just work" on Linux. It can also download the CodeSourcery toolchain for Linux to replace the one included in the PDK, built for Darwin.

==Setup==
===Get the Webos-Internals WIDK ===

<pre style="margin-left:50px;">
git clone git://git.webos-internals.org/preware/cross-compile.git
cd cross-compile
make doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg
</pre>

You now have a Palm_webOS_SDK-Mac-1.4.5.465.pkg in doctors/ . Now let's extract it into / (this will create /opt/PalmPDK)

<pre style="margin-left:50px;">
xar -xf doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg palmpdk.pkg
sudo sh -c 'gzip -cd palmpdk.pkg/Payload | (cd /; cpio -i)'
</pre>

===Get CodeSourcery Linux cross-compiler===
Install the CodeSourcery Linux cross-compiler toolchain where Palm's toolchain built for OSX was.

<pre style="margin-left:50px">
make toolchain
sudo cp -r toolchain/arm-2007q3 /opt/PalmPDK
cd /opt/PalmPDK
sudo mv arm-gcc arm-gcc-darwin
sudo ln -s arm-2007q3 arm-gcc
</pre>

Someone who is familiar with the PDK should test this at this point to see if you can actually use it in the proper ways.

PDK on Linux

2010-12-28T17:13:17Z

Rboatright:

The official Palm PDK development kit for writing native programs is not supported on Linux.

The instructions on this page should allow you to get the official Palm webOS PDK for OSX working on Linux.

It's totally untested other than running a few scripts and confirming that things seem to be where they should be, so please confirm if it works for you.

==Prerequisites==
Get the command line tool "xar". Some debian based systems have it, try apt-get install xar. If not found, get it from http://code.google.com/p/xar/ (I needed package libxml2-dev to compile it)

WIDK cross-compile repository is really helpful as it already has functionality to download and extract the OSX PDK, most of which will "just work" on Linux. It can also download the CodeSourcery toolchain for Linux to replace the one included in the PDK, built for Darwin.

==Setup==
===Get the Webos-Internals WIDK ===

<pre style="margin-left:50px;">
git clone git://git.webos-internals.org/preware/cross-compile.git
cd cross-compile
make doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg
</pre>

You now have a Palm_webOS_SDK-Mac-1.4.5.465.pkg in doctors/ . Now let's extract it into / (this will create /opt/PalmPDK)

<pre>
xar -xf doctors/Palm_webOS_SDK-Mac-1.4.5.465.pkg palmpdk.pkg
sudo sh -c 'gzip -cd palmpdk.pkg/Payload | (cd /; cpio -i)'
</pre>

===Get CodeSourcery Linux cross-compiler===
Install the CodeSourcery Linux cross-compiler toolchain where Palm's toolchain built for OSX was.

<pre style="margin-left:50px">
make toolchain
sudo cp -r toolchain/arm-2007q3 /opt/PalmPDK
cd /opt/PalmPDK
sudo mv arm-gcc arm-gcc-darwin
sudo ln -s arm-2007q3 arm-gcc
</pre>

Someone who is familiar with the PDK should test this at this point to see if you can actually use it in the proper ways.

WebOS Internals PDK

2010-12-28T17:04:13Z

Rboatright:

[[Category: SDL]]
Palm's binary sdk the "Plugin Developer Kit" became available to all developers in March 2010.

When the widk was developed, the Palm PDK didn't exist, and until Dec 2010, it was not possible to run the PDK in Linux. If you would like to run the official Palm PDK, see [[PDK on Linux]] for directions.

In addition to the PDK, webOS Internals has released a full "WIDK" (webOS Internals Development Kit) for you using Scratchbox2.

Less than 10% of developers in the webOS developer community use Linux variants. Among those 10% there are dozens of different linux distributions that people use. Palm, therefore has chosen to support only Mac and Windows platforms for their PDK. Palm reccomends that Linux based developers use the webOS-internals WIDK instead.

We ''strongly'' urge the open-source homebrew community to standardize on this WIDK. It uses the same underlying technologies, and is entirely open.

Scratchbox 2 is a cross-compilation engine, it can be used to create a highly flexible SDK.

As installed below, the install process uses a script which extracts the required Palm provided files from a copy of webOS doctor, and downloads from other sources, and builds a complete compilation environment automatically which can compile SDL and openGLES apps for webOS.

SB2 ''itself'' is totally distribution neutral but the webOS cross-compile environment is designed and tested on Ubuntu 9.10 32 bit. (At least one user in #webos-internals reports complete success running the cross compile environment in Ubuntu 9.10 64 bit after installing curl via apt-get.) See [[WebOS_Internals_PDK_on_Mandriva]] if you want to run it on Mandriva. If you want to run the WIDK on other distributions and are willing to support that yourself and not ask webOS Internals any questions about it then please enjoy and if you succeed come back here and make a new article on how you did it. Otherwise, use the recommended OS.

The webOS Internals team ''strongly suggest'' apt-get install into the Ubuntu environment only for this purpose. The same installation of Sun Virtualbox which hosts the Palm SDK emulator can host an Ubuntu 9.10 server with very little effort on any operating system.

Developers wanting to work in an open environment 'without' SB2 can consider using the [[PuffTheMagic NDK]].

==SB2 Homepage==
[http://www.freedesktop.org/wiki/Software/sbox2 http://www.freedesktop.org/wiki/Software/sbox2]pdk

==License==
Scratchbox 2 is distributed under LGPL version 2.1, portions are under GPL version 2. Some minor stuff is under MIT style license.

== Installation on Ubuntu for webOS PDK cross compiling ==

If setting up in a Virtual Box instance, it is recommended that you first complete the openSSH config as described in the VirtualBox tips for Windows users to the right. This is helpful even with a Linux host, as SSH into the PDK Virtual Machine will allow copy and paste of the commands listed below and reduce errors.

== Update ==
There is an automated installer avaliable [http://forums.precentral.net/webos-internals/266139-webos-internals-automated-installers.html#post2718551 here]

<div style="float:right; clear:right; width:30%">{{Ubuntu_VM_notes_for_Windows_users}}</div>
===Toolchain===

===Prerequisites===
Your Ubuntu installation will need the following installed. If you do not have them, run the command after the package name. You can test if they are found by just typing the command name. If it says command not found, you need to install it.

{| border="1"
|+
|'''git''' || sudo apt-get install git-core
|-
|'''gcc''' || sudo apt-get install build-essential
|-
|'''curl''' || sudo apt-get install curl
|-
|'''unzip'''|| sudo apt-get install unzip
|-
|'''autoconf'''|| sudo apt-get install autoconf
|-
|'''subversion'''|| sudo apt-get install subversion
|-
|'''libtool'''|| sudo apt-get install libtool
|-
|'''wget'''|| sudo apt-get install wget
|-
|'''pkg-config'''|| sudo apt-get install pkg-config
|-
|'''gettext'''|| sudo apt-get install gettext
|-
|'''fakeroot'''|| sudo apt-get install fakeroot
|-
|'''javac'''|| sudo apt-get install sun-java6-jdk
|-
|'''ant'''|| sudo apt-get install ant
|-
|'''xsltproc'''|| sudo apt-get install xsltproc
|-
|'''intltool'''|| sudo apt-get install intltool
|-
|'''mkimage'''|| sudo apt-get install uboot-mkimage
|-
|'''lsdiff'''|| sudo apt-get install patchutils
|-
|'''flex'''|| sudo apt-get install flex
|-
|'''bison'''|| sudo apt-get install bison
|-
|'''libssl-dev'''|| sudo apt-get install libssl-dev
|-
|'''libz-dev'''|| sudo apt-get install libz-dev
|-
|'''libbz2-dev'''|| sudo apt-get install libbz2-dev
|-
|'''xar'''|| sudo apt-get install xar
|-
|'''help2man'''|| sudo apt-get install help2man
|-
|'''texinfo'''|| sudo apt-get install texinfo
|-
|'''xar'''|| sudo apt-get install xar
|}

* it has been reported that sun-java6-jdk isn't necessary

If you're uncertain at all, just cut and paste the following. If they are already installed, they'll be skipped.

sudo apt-get install git-core build-essential curl unzip autoconf subversion libtool wget pkg-config gettext fakeroot ant xsltproc intltool uboot-mkimage patchutils flex bison libssl-dev libz-dev libbz2-dev xar help2man texinfo xar

'''Note:''' If you are a beginner with Ubuntu Linux Distribution, you should update all the packages on your system to avoid problems when you will compile.<BR>
Use these 2 command line :<BR>
Update repositories :
sudo aptitude update
And next, update the packages :
sudo aptitude safe-upgrade

If you're on a 64-bit system, you will also need to install the ia32-libs package.

'''Note:''' The ''make toolchain'' command and later steps will download approximately a half-gig of tools and sources from various locations. Do not start this if you do not have time for a large download. Additionally, if you already have downloaded a copy of the correct version of the WebOS doctor, you can reduce the download time by copying the doctor file into cross-compile/doctors/ with the correct name. This will cause the appropriate command to skip that download. Note that codesourcery rate limts downloads and at a minimum this process will take 10 to 15 minutes irrespective of your connection speed.

====Start setup====
Create a preware folder, copy the cross-compile tools into it (if you have not installed git, apt-get install git-core), and use a make script to begin the set up of the compilation toolchain.

sudo mkdir -p /srv/preware
cd /srv/preware
sudo chmod 777 .
git clone git://git.webos-internals.org/preware/cross-compile.git
cd cross-compile
make toolchain

====Fix mmap errors====
The following commands appear redundant. They are not. The install this fixes your mmap config to fix an mmap: permission denied error, but we don't need the package itself. (Do each command separately with cut and paste).

sudo apt-get install qemu-arm-static
sudo apt-get remove qemu-arm-static

: <span style="font-size:150%">OR</span> As a workaround, if this package is not available,
::: the following commands can be executed in a root shell (sudo -s) to fix the mmap configuration to enable qemu-arm to work.

echo "vm.mmap_min_addr = 4096" > /etc/sysctl.d/mmap_min_addr.conf
/etc/init.d/procps restart

(note that the value should not be "0". 4096 is chosen to avoid null pointer attacks.)

====Verify sh shell====
On Ubuntu /bin/sh is a symbolic link to dash. This will cause errors with the make stage command below, as some of the scripts assume bash. Run the following command to see what shell sh is linked to.

ls -l /bin/sh

If the result is a link to dash:

lrwxrwxrwx 1 root root 4 2010-07-06 23:55 /bin/sh -> dash

You will want to correct it with the following:

sudo dpkg-reconfigure dash

You will be asked if you want to "Install dash as /bin/sh?". Select "<No>" and bash will be used. Rerun the command to verify:

ls -l /bin/sh

You should now see:

lrwxrwxrwx 1 root root 4 2010-07-09 21:12 /bin/sh -> bash

====Setup Scratchbox====
Now, use apt-get to setup scratchbox...

sudo apt-get install scratchbox2 qemu-kvm-extras

...and set it up for compiling for webOS.

cd /srv/preware/cross-compile/toolchain/arm-2007q3/arm-none-linux-gnueabi/libc
PATH=/srv/preware/cross-compile/toolchain/arm-2007q3/bin:${PATH} sb2-init -c /usr/bin/qemu-arm armv7 arm-none-linux-gnueabi-gcc
cd /srv/preware/cross-compile

Then:

make stage

Once this setup is complete, compiling sdl apps for webOS is very simple.

==Verified installed clean list==

If you have successfully built the WIDK from scratch, with NO problems, feel free to add your information to this list. This will help us assess what distributions and versions it is fully compatible with.

{| border="1" class="wikitable"
|-
|'''IRC name'''
Scoutcamper
|'''Linux Distribution'''
Ubuntu
|'''Version'''
9.04,9.10,10.04,10.10
|'''Date'''
10-18-10
|'''Comments'''
Works Great!
|-
|}
It just doesn't work tried for over a week, with fresh Ubuntu 10.4 inside and outside of virtual box, fails on libtool for common/fuse/. Tried -j4 option with make stage, tried make staging-armv7. Also installed automake-1.9 after seeing complaints about that.

==Errors during make stage (22:46, 10 October 2010)==

make[5]: Entering directory `/srv/preware/cross-compile/packages/common/libdotconf/build/armv6/src'
/bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -O2 -MT libdotconf_la-dotconf.lo -MD -MP -MF .deps/libdotconf_la-dotconf.Tpo -c -o libdotconf_la-dotconf.lo `test -f 'dotconf.c' || echo './'`dotconf.c
libtool: Version mismatch error. This is libtool 2.2.6b, but the
libtool: definition of this LT_INIT comes from libtool 2.2.6.
libtool: You should recreate aclocal.m4 with macros from libtool 2.2.6b
libtool: and run autoconf again.
make[5]: *** [libdotconf_la-dotconf.lo] Error 63
make[5]: Leaving directory `/srv/preware/cross-compile/packages/common/libdotconf/build/armv6/src'
make[4]: *** [install-recursive] Error 1
make[4]: Leaving directory `/srv/preware/cross-compile/packages/common/libdotconf/build/armv6'
make[3]: *** [build/armv6.built] Error 2
make[3]: Leaving directory `/srv/preware/cross-compile/packages/common/libdotconf'
make[2]: *** [build_common/libdotconf] Error 2
make[2]: Leaving directory `/srv/preware/cross-compile'
make[1]: *** [staging-armv6] Error 2
make[1]: Leaving directory `/srv/preware/cross-compile'
make: *** [stage] Error 2

Confirmed by 3 people. Fix this by either (your choice)
*upgrading to Ubuntu 10.04 or newer (the WIDK now relies on a slightly newer version of libtool that's not in 9.10 or earlier)
*updating libtool to 2.2.6b-2 (backported to 9.10, see available downloads on http://linuxappfinder.com/package/libtool#ubuntu_karmicpartner)

===Ecore===
*TRUE and FALSE are not defined

Manually add the definition:

#ifndef TRUE
# define TRUE 1
#endif

#ifndef FALSE
# define FALSE 0
#endif

===/bin/sh errors===
If you are getting a "bad fd number" or other /bin/sh error, make sure your /bin/sh points to bash, not another shell (such as dash.)

Go back through the Verify sh shell section above to correct.

==Sample build of [[Application:Doom]]==

Now, go to [[Building DOOM with scratchbox2]] and follow the simple directions.

==In Process Enhancements==
[[Extracting the PDK on Linux]]

Portal:Tools

2010-12-28T16:56:45Z

Rboatright:

__notoc__
{{portal-header|
This page lists tools used in any form.
}}
{{portal-two-columns
|column1=
== webOS Internal Related Tools ==

* [[Getting started|Accessing Developer Mode]]
* [[Backing_Up_via_Rsync|Backing Up via Rsync]]
* [[Com Palm Appinstaller]]
* [[Com Palm Downloadmanager|Com Palm Downloadmanager]]
* [[Crond|Crond]]
* [[Detecting Application Errors, Syslog|Detecting Application Errors, Syslog]]
* [[How to solve 3G data problems]]
* [[Important_Personal_Data_Locations|Important Personal Data Locations]]

* [[/usr/bin/lunaprop|/usr/bin/lunaprop]]
* [[Java Services|Java Services]]
* [[Luna Send|Luna Send]]
* [[PalmDatabase.db3 File|PalmDatabase.db3 File]]


* [[Profile.d|Profile.d]]
* [[Tellbootie|Tellbootie]]
* [[Webos Doctor Versions|Webos Doctor Versions]]

==Cross-Compiling and Kernels==
* [[Autobuilder Setup|Autobuilder Setup]]
* [[WebOS Internals PDK]]
* [[Cross Compiling|Cross Compiling]]
* [[Custom Kernels|Custom Kernels]]
* [[Optware Cross Compilation|Optware Cross Compilation]]
* [[Building_a_cross_toolchain|Building a cross-toolchain for armv7 on Gentoo]]
* [[Adding_patches_through_git|Adding patches through git]]

|column2=

==PDK Related Pages==

[[WebOS Internals PDK]] WebOS-Internals alternative to Palm's PDK

[[PDK on Linux]] Running Palm's official PDK on linux.

==SDK Related Tools ([[Comparison of Editors|Comparison Chart]]) ==

===Eclipse===

[http://www.eclipse.org/downloads/ Eclipse] is the editor officially supported by Palm. You can find the Eclipse WebOS plugin [http://developer.palm.com/index.php?option=com_content&view=article&id=1639 here].

===Komodo Edit===

[http://www.activestate.com/komodo_edit/ Komodo Edit] is an easy to use cross platform open source editor. Use along side the webOS [http://www.webos.templarian.com/komodo/ Add-on] for easier development. Complete [http://www.webos.templarian.com/komodo/ Code Completion] is also available for Mojo. [[Komodo|Wiki Page with Screensots and Install Guide]].

===Aptana Studio===

[http://www.aptana.com/studio/download Aptana Studio] is a standalone version of an Eclipse plugin. Very easy to use. You can install the Aptana WebOS plugin by directing Aptana to check [https://cdn.downloads.palm.com/sdkdownloads/1.1/eclipse-plugin/eclipse-3.4/site.xml this link]. If you do not know how to set this up, please look at official Palm documentation [http://developer.palm.com/index.php?option=com_content&view=article&id=1639 here].
}}

Setup SFTP

2010-11-22T17:34:31Z

Rboatright: d

{{reorganize|This page is deprecated (see Introduction). '''It is strongly recommended that unless you are an advanced Linux user, you use the automated setup meta-package instead of doing this manually. We suggest that you go [[Next_steps | here]] instead.'''

'''Note also that if you are a windows user, winSCP is faster and just as secure using the SCP protocol without doing all this. We suggest just using winSCP without bothering to set it up for SFTP which is slower and no more secure.''' }}

Once you have accessed Linux on your Pre, it would be nice to be able to get and put files off the Pre without having to switch to usb drive mode, and copy the files over,and switch back to user mode, and move the files out of the media/internal folder and so forth.

One good way to do this is via SFTP. If you are not sure what that is, please visit [http://en.wikipedia.org/wiki/SSH_File_Transfer_Protocol this wiki page].

This document assumes you know why you want sftp, and how to use it once it's on the Pre.

Step 1: [[Portal:Accessing_Linux | Login to your Pre's Linux shell]]. You must also have Optware packages configured, as outlined [[Next_steps|here]]:

Step 2: Set Read/Write Access:
<pre><nowiki>
sudo -i
mount -o remount,rw /
</nowiki></pre>

Step 3: Install the needed components from ipkg-opt:
<pre><nowiki>
cd /opt/bin
ipkg-opt update
ipkg-opt install openssh-sftp-server
</nowiki></pre>

Step 4: Modify the sudoers file to allow your user account to sudo sftp-server without a password:
<pre><nowiki>
visudo
</nowiki></pre>
Once in the file, add the following line after the existing ALL line for your user - where //myusername// should be replaced with the user account that you are using to access your Pre via SSH. The order of the lines count here :

Example:
<pre><nowiki>
myusername ALL=(ALL) ALL
myusername ALL=NOPASSWD: /opt/libexec/sftp-server
</nowiki></pre>

Quit and save your changes (ESC :wq)

Step 5: Mount the Pre's file system as read-only:
<pre><nowiki>
mount -o remount,ro /
</nowiki></pre>

Step 6: Reboot via one of the methods below:

Method 1:
<pre><nowiki>
su
/sbin/reboot
</nowiki></pre>

Method 2:
<pre><nowiki>
sudo su -l
reboot
</nowiki></pre>

Method 3:
Turn off the Pre by holding the power button until the 'Turn Off' button appears and then pressing it. Turn the Pre back on after it has turned off by holding the power button until you see the Palm logo.

Other Methods:
You may be able to reboot the phone with other commands. You can hit Orange+Sym+R on your Pre's keyboard to perform a soft reset, as well.

To login to the Pre using WinSCP:

<pre><nowiki>
Hostname: [my pre's ip]
port: [my pre's port] (222 if you followed the Optware enabling instructions verbatim)
username and password you set

Check 'Advanced Options' and select "Environment>SFTP".
In the SFTP server box enter: sudo /opt/libexec/sftp-server

Be sure to set "mount -o remount,rw /" to write and "mount -o remount,ro /" when done. (If on Windows, do this through PuTTY. I haven't found a way to do it through WinSCP, but you can go to "Commands>Open in PuTTY" from the main toolbar.)
</nowiki></pre>

Courtesy of jhoff80 and blakeb at PreCentral.net

Applying Patches

2010-11-22T17:32:37Z

Rboatright: d

{{reorganize|This page is deprecated}}
==Introduction==

We cannot legally redistribute Palm source code (it is copyrighted code, and is not released under an open source license) therefore we need to manage our modifications as patches. Since these patches will come from many different places, and will need to be removed before each OTA update and then reapplied after-wards, we need a procedure and tools for doing this. This page documents this procedure.

Before asking questions about this procedure, please read the following documents fully:

An introduction to Quilt can be found at http://www.suse.de/~agruen/quilt.pdf

The manual for quilt is at http://linux.die.net/man/1/quilt

==Upgrading from quilt to quilt-lite==

If you have performed these instructions before the 8th Aug 2009, you will have installed a very heavyweight version of the quilt package which has a dependency on a very large perl package.

This dependency has been removed in a new quilt-lite package, which saves 26MB of space in /var as a result.

You can switch over to it as follows:

* ipkg-opt update
* ipkg-opt remove quilt perl libdb gdbm util-linux-ng e2fslibs ncursesw
* ipkg-opt install quilt-lite

Alternatively, the setup script below will prompt to uninstall quilt, perl, etc ..., and install quilt-lite, if quilt is installed.

==Setup Procedure (Scripted)==
The process of setting up quilt has been scripted. The script performs the following actions:
* Installs (or upgrades) git and any dependencies
* Installs (or upgrades) quilt (actually quilt-lite, a version of quilt that does not depend on perl) and any dependencies
* Configures quilt to store patches in /opt/src/patches
* Creates (or updates) a local clone of the webos-internals modifications repository

Each step is only performed if necessary. Please note that ipkg-opt needs to be installed. The instructions are found [[Next_steps|here]].

To get run the script, log into your Pre, gain root privileges and run the following commands:
<pre><nowiki>
cd /tmp
wget http://gitorious.org/webos-internals/bootstrap/blobs/raw/master/quilt-bootstrap.sh
sh quilt-bootstrap.sh
</nowiki></pre>

==Setup Procedure (Manual Process)==
(Note: Even though you may have previously installed the optware quilt patch manager, it won't damage anything to follow the Setup procedure. Alternatively, if you KNOW FOR SURE these are installed and your packages are up-to-date, you can skip to Importing and Applying Patches).

* Log into your Pre, and gain root privileges. (Note: This command is not required when using the emulator)
<pre><nowiki>
sudo -i # Yes, the -i is important.
</nowiki></pre>

* Put your Pre in to Read Write Mode
<pre><nowiki>
mount -o remount,rw /
</nowiki></pre>

* Ensure that you are set up for optware package installations, and make sure you have the latest package index:
<pre><nowiki>
ipkg-opt update
</nowiki></pre>

* Install the 'quilt-lite' package, which will be used to manage the patches you apply, and the 'git' package, which will be used to download existing patches from the modifications repository:
<pre><nowiki>
ipkg-opt install quilt-lite git
</nowiki></pre>

(If you already have those packages installed, repeating this step will not cause any harm.)

* Create a directory in which 'quilt' will manage your chosen modifications:
<pre><nowiki>
mkdir -p /opt/src/patches
</nowiki></pre>

* Edit /opt/etc/quilt.quiltrc to point quilt to that directory:
<pre><nowiki>
sed -ire 's|^[\s#]*QUILT_PATCHES=.*|QUILT_PATCHES=/opt/src/patches|' /opt/etc/quilt.quiltrc
</nowiki></pre>

* Delete any existing webos-internals modifications directories
<pre><nowiki>
rm -rf /opt/src/modifications
</nowiki></pre>

* Clone the webos-internals modifications repository:
<pre><nowiki>
cd /opt/src
git clone git://gitorious.org/webos-internals/modifications.git
</nowiki></pre>

==Importing and Applying Patches==

* Ensure your list of modifications is up to date
<pre><nowiki>
cd /opt/src/modifications
git pull
</nowiki></pre>
** If you find yourself getting errors when you try to pull with the above command then you will need to modify your .git/config file
<pre><nowiki>
sudo vi /opt/src/modifications/.git/config
</nowiki></pre>

** Your [master] section should look like the following
<pre><nowiki>
[branch "master"]
remote = origin
merge = refs/heads/master
</nowiki></pre>

* Browse the set of available patches. Each patch should have a description at the top.
<pre><nowiki>
find /opt/src/modifications -name *.patch
</nowiki></pre>

* Choose a patch from the modifications repository and import it into your own patches directory:
<pre><nowiki>
cd / # It is *very* important to be in the / directory when you run quilt.
quilt import /opt/src/modifications/application_name/patch_name.patch # Note that you need to replace application_name and patch_name here.
</nowiki></pre>

* Verify that quilt has imported the patch successfully:
<pre><nowiki>
# You should still be in the / directory to run quilt.
quilt series # you should see your patch listed in here
</nowiki></pre>

* Instruct quilt to apply your patch
<pre><nowiki>
# You should still be in the / directory to run quilt.
quilt push
# Use this to push all patches at once.
quilt push -a
</nowiki></pre>

* If everything worked correctly, the patch should now be applied. You will usually need to restart the luna service on the Pre to see the effect of patches to applications. Here's how to initiate a rescan.
<pre><nowiki>
luna-send -n 1 palm://com.palm.applicationManager/rescan {}
</nowiki></pre>

If that doesn't work, try a service restart with:
<pre><nowiki>
stop LunaSysMgr && start LunaSysMgr
</nowiki></pre>

And if all else fails, simply reboot:
<pre><nowiki>
reboot
</nowiki></pre>

==Listing Applied Patches==
<pre><nowiki>
cd / # It is *very* important to be in the / directory when you run quilt.
quilt applied
</nowiki></pre>

==Removing All Patches==

Before you accept an over-the-air (OTA) update, you should remove any patches you have applied. Luckily, using quilt makes this very easy.

* Remove all patches:
<pre><nowiki>
cd / # It is *very* important to be in the / directory when you run quilt.
quilt pop -a
</nowiki></pre>

==Reapplying all patches==

After your OTA update is complete, you will want to reapply any patches you have selected. This may or may not go smoothly.

* Apply all patches:
<pre><nowiki>
cd / # It is *very* important to be in the / directory when you run quilt.
quilt push -a
</nowiki></pre>

* Put your Pre back in to Read Only mode
<pre><nowiki>
mount -o remount,ro /
</nowiki></pre>

==Quilt Commands==

Other commands when using Quilt-Lite:

Please feel free to add/edit this section. I am not an expert, these are commands that I found by accident when i misspelled delete.

<pre><nowiki>
quilt
add
applied (shows applied/installed patches)
delete (removes a patch from quilt series ex: quilt delete *name of patch*)
diff
edit
files
fold
fork
graph
grep
header
import (downloads patch from git ex: quilt import *name of patch*)
mail
new
next
patches
pop
previous
push (installs patches from quilt series one at a time. quilt push -a installs all patches)
refresh
rename
revert
series (shows all downloaded patches.)
setup
snapshot
top
unapplied
upgrade

</nowiki></pre>

==Information for developing patches==

===Getting Authenticated with gitorious.org===
Before you can commit to gitorious you need to [http://gitorious.org/users/new create an account].

Next, you'll need to create a public/private key pair, and the easiest way to do this is with openssh. If you want to create a pair with windows, there are PuTTYgen/Pageant instructions below under "Alternate Windows Method", but the following may be easier. After you generate a public key you'll share it with gitorious.org; your public key is how gitorious.org authenticates you and checks if have the permissions required to do a commit to a given repository.
<pre><nowiki>
ipkg-opt update
ipkg-opt install openssh # *see Note Below
sudo ssh-keygen -t rsa # follow the prompts, ensure you're saving to /var/home/root/.ssh
cat /var/home/root/.ssh/id_rsa.pub # copy the output and paste it into gitorious key manager
</nowiki></pre>
<nowiki>*</nowiki>There's been some work to get dropbear working, but this tutorial assumes you have openssh installed. For information about dropbear and ssh keys, see [http://tumblelog.jauderho.com/post/151678345/using-dropbear-with-git this page]
* Don't forget to upload your public key from the last statement above to gitorious.org

Next, you'll need to ensure you have your environment properly configured.

<pre><nowiki>
echo $GIT_SSH # Should be /opt/bin/openssh-ssh
</nowiki></pre>

If the output of this command are anything other than /opt/bin/openssh-ssh, you'll need to update /etc/profile.d/optware. Add

<pre><nowiki>
export GIT_SSH=/opt/bin/openssh-ssh
</nowiki></pre>

To the top of the /etc/profile.d/optware.

Now you should be able to follow the steps below and contribute your code to gitorious.org.

'''Alternate Windows Method'''

The only reasons you might want to pursue this method is if you want to generate a ssh key pair on a Windows box.

Getting your key on window
* Download [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html PuTTYgen] and [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Pageant]

--Gitorious.org [http://gitorious.org/about/faq gitorious.org recommends] you use [http://code.google.com/p/msysgit/ msysGit].--

* On Windows use [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html PuTTYgen] to generate a public/private key pair.

<pre><nowiki>
Key -> SSH-2 RSA KEY
Key -> Generate key pair
</nowiki></pre>
After some wiggling of the mouse your keys will be generated. You should fill in the //Key passphrase// and it's confirmation to secure you key. Save off the public and private key pairs to your user folder.

* After which you will need to run [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Pageant] on your pc. Pageant holds your private key in memory for PuTTY to use.

===Creating a patch===

* Before making any changes to files:

<pre><nowiki>
cd / # It is *very* important to be in the / directory when you run quilt.
quilt new patch_name.patch
quilt add /usr/palm/applications/com.palm.app.appYouWantToMod/app/controllers/mod-assistant.js
quilt add /usr/palm/applications/com.palm.app.appYouWantToMod/app/controllers/mod2-assistant.js
</nowiki></pre>

* Now you can make changes on the Pre using vi/nano/joe/whatever, or sftp files to your machine and make changes. Make sure any file you change has been added in the above step.

<pre><nowiki>
quilt files # view files that are being tracked
quilt header -e # add a header to the patch to describe it (please do this!)
</nowiki></pre>

* Once you are finished and ready to create a patch

<pre><nowiki>
quilt refresh # this will create/update the /opt/src/patches/patch_name.patch file
</nowiki></pre>

===Pushing the change back to gitorious.org===

* copy the patch into the modification tree you cloned above

<pre><nowiki>
mkdir /opt/src/modifications/application_name # You need to change application_name to the leaf of the palm application id.
cp /opt/src/patches/patch_name.patch /opt/src/modifications/application_name/patch_name.patch
</nowiki></pre>

* Identify yourself in git (use the user you have setup at gitorious.org)

<pre><nowiki>
cd /opt/src/modifications
git config --global user.name "user"
git config --global user.email "youremail@example.com"
</nowiki></pre>

* Commit your changes to your local git

<pre><nowiki>
git add application_name/patch_name.patch
git commit
</nowiki></pre>

* Since we did a clone the first time, we need to recreate the origin:

<pre><nowiki>
git remote rm origin # (if you did a clone, we have to replace the origin)
git remote add origin git@gitorious.org:webos-internals/modifications.git
</nowiki></pre>
*This will destroy your ability to actually pull down updates, so you'll need to modify the /opt/src/modifications/.git/config to contain:

<pre><nowiki>
[branch "master"]
remote = origin
merge = refs/heads/master
</nowiki></pre>
* Finally, push your changes up to gitorious.org

<pre><nowiki>
git push origin master # first time
git push # any future pushes
</nowiki></pre>

* If the push does not work, try to debug the ssh connection
<pre><nowiki>
/opt/bin/ssh -v git@gitorious.org
</nowiki></pre>

==Extended, annotated sample session with quilt==
* First, we just need to setup a file to muck with
<pre><nowiki>
root@castle:/# cd /
root@castle:/# echo "Original file" > /usr/test
root@castle:/# echo "2nd lien" >> /usr/test
root@castle:/# echo "3rd ilne" >> /usr/test
root@castle:/# echo "last line" >> /usr/test
</nowiki></pre>
* Start a new patch (normally you'll want to use patch_name.patch, I just wanted a shortened name)
<pre><nowiki>
root@castle:/# quilt new p1
Patch /opt/src/patches/p1 is now on top
</nowiki></pre>
* You must quilt add any files that you are going to edit or create '''before''' you edit or create them.
<pre><nowiki>
root@castle:/# quilt add /usr/test
File /usr/test added to patch /opt/src/patches/p1
</nowiki></pre>
* Just using sed to correct the spelling on the 2nd line
<pre><nowiki>
root@castle:/# sed -i -e 's/lien/line/' /usr/test
</nowiki></pre>
* quilt refresh actually finds what you have changed and writes it to the patch file (at this point, you can use git to push your changes)
<pre><nowiki>
root@castle:/# quilt refresh
Refreshed patch /opt/src/patches/p1
</nowiki></pre>
* Just for fun, let's do it again
<pre><nowiki>
root@castle:/# quilt new p2
Patch /opt/src/patches/p2 is now on top
</nowiki></pre>
* Again, add file, make some changes, refresh to update the patch.
<pre><nowiki>
root@castle:/# quilt add /usr/test
File /usr/test added to patch /opt/src/patches/p2
root@castle:/# sed -i -e 's/ilne/line/' /usr/test
root@castle:/# quilt refresh
Refreshed patch /opt/src/patches/p2
</nowiki></pre>
* Just an example of rolling back changes
<pre><nowiki>
root@castle:/# quilt pop
Removing patch /opt/src/patches/p2
Restoring usr/test

Now at patch /opt/src/patches/p1
root@castle:/# quilt pop
Removing patch /opt/src/patches/p1
Restoring usr/test

Now at patch /opt/src/patches/enable-browser-downloads.patch
root@castle:/# cat /usr/test
Original file
2nd lien
3rd ilne
last line
</nowiki></pre>
* delete will delete the patch from your series, but leave the actual patch file in /opt/src/patches (so you could import it later)
<pre><nowiki>
root@castle:/# quilt delete p1
Removed patch /opt/src/patches/p1
</nowiki></pre>
* Since we removed p1, push will now apply p2. However, since p2 was applied against p1 originally, p2 will report an error. If the changes are too significant, you can force with -f, but you should carefully inspect the resulting files.
<pre><nowiki>
root@castle:/# quilt push
Applying patch /opt/src/patches/p2
patching file usr/test
Hunk #1 succeeded at 1 with fuzz 2.

Now at patch /opt/src/patches/p2
</nowiki></pre>
* If we want, we can refresh the patch so that future users of the patch do not receive the "fuzz" warning.
<pre><nowiki>
root@castle:/# quilt refresh
Refreshed patch /opt/src/patches/p2
root@castle:/# cat /usr/test
Original file
2nd lien
3rd line
last line
</nowiki></pre>
* cleanup
<pre><nowiki>
root@castle:/# rm /usr/test
</nowiki></pre>

==Background info==

* [http://pkg-perl.alioth.debian.org/howto/quilt.html quilt]

==Script for Updating/Installing Patches==

I just wanted to share the following script that I just finished testing out. It's only been tested on my Pre so far, as I don't have access to any others.. It just updates the patch list, prints out available patches, then lets you choose which to apply.

<pre><nowiki>
#!/opt/bin/bash

cd /opt/src/modifications
tput clear
echo Updating list...
git pull
tput clear
cd /

a=0
for inputline in $(find /opt/src/modifications -name *.patch | sort)
do
a=$(($a+1));
line="$(echo $inputline)"
MYARRAY[$a]="$line"
echo "${a}${line}" | awk -F "/" 'sub(".patch","",$6) {printf "%-3s %-15s %s\n", $1, $5, $6}'
done
echo "q quit"

x=$(($a+1));
until [ -n "$opt" ] ; do
read -p "Enter the line number for patch to apply [1 - $a] " opt
if [ "$opt" = "q" ] ; then
exit 0
fi
if [ "$opt" -lt "$x" 2> /dev/null ] && [ "$opt" -gt 0 2> /dev/null ] ; then
true
else
opt=""
fi
done

tput clear
cd /
quilt import ${MYARRAY[$opt]}
quilt push
luna-send -n 1 palm://com.palm.applicationManager/rescan {}

</nowiki></pre>

Applying Patches

2010-11-22T17:32:17Z

Rboatright: d

{{reorganize|This page is deprecated (see Introduction).}}
==Introduction==

We cannot legally redistribute Palm source code (it is copyrighted code, and is not released under an open source license) therefore we need to manage our modifications as patches. Since these patches will come from many different places, and will need to be removed before each OTA update and then reapplied after-wards, we need a procedure and tools for doing this. This page documents this procedure.

Before asking questions about this procedure, please read the following documents fully:

An introduction to Quilt can be found at http://www.suse.de/~agruen/quilt.pdf

The manual for quilt is at http://linux.die.net/man/1/quilt

==Upgrading from quilt to quilt-lite==

If you have performed these instructions before the 8th Aug 2009, you will have installed a very heavyweight version of the quilt package which has a dependency on a very large perl package.

This dependency has been removed in a new quilt-lite package, which saves 26MB of space in /var as a result.

You can switch over to it as follows:

* ipkg-opt update
* ipkg-opt remove quilt perl libdb gdbm util-linux-ng e2fslibs ncursesw
* ipkg-opt install quilt-lite

Alternatively, the setup script below will prompt to uninstall quilt, perl, etc ..., and install quilt-lite, if quilt is installed.

==Setup Procedure (Scripted)==
The process of setting up quilt has been scripted. The script performs the following actions:
* Installs (or upgrades) git and any dependencies
* Installs (or upgrades) quilt (actually quilt-lite, a version of quilt that does not depend on perl) and any dependencies
* Configures quilt to store patches in /opt/src/patches
* Creates (or updates) a local clone of the webos-internals modifications repository

Each step is only performed if necessary. Please note that ipkg-opt needs to be installed. The instructions are found [[Next_steps|here]].

To get run the script, log into your Pre, gain root privileges and run the following commands:
<pre><nowiki>
cd /tmp
wget http://gitorious.org/webos-internals/bootstrap/blobs/raw/master/quilt-bootstrap.sh
sh quilt-bootstrap.sh
</nowiki></pre>

==Setup Procedure (Manual Process)==
(Note: Even though you may have previously installed the optware quilt patch manager, it won't damage anything to follow the Setup procedure. Alternatively, if you KNOW FOR SURE these are installed and your packages are up-to-date, you can skip to Importing and Applying Patches).

* Log into your Pre, and gain root privileges. (Note: This command is not required when using the emulator)
<pre><nowiki>
sudo -i # Yes, the -i is important.
</nowiki></pre>

* Put your Pre in to Read Write Mode
<pre><nowiki>
mount -o remount,rw /
</nowiki></pre>

* Ensure that you are set up for optware package installations, and make sure you have the latest package index:
<pre><nowiki>
ipkg-opt update
</nowiki></pre>

* Install the 'quilt-lite' package, which will be used to manage the patches you apply, and the 'git' package, which will be used to download existing patches from the modifications repository:
<pre><nowiki>
ipkg-opt install quilt-lite git
</nowiki></pre>

(If you already have those packages installed, repeating this step will not cause any harm.)

* Create a directory in which 'quilt' will manage your chosen modifications:
<pre><nowiki>
mkdir -p /opt/src/patches
</nowiki></pre>

* Edit /opt/etc/quilt.quiltrc to point quilt to that directory:
<pre><nowiki>
sed -ire 's|^[\s#]*QUILT_PATCHES=.*|QUILT_PATCHES=/opt/src/patches|' /opt/etc/quilt.quiltrc
</nowiki></pre>

* Delete any existing webos-internals modifications directories
<pre><nowiki>
rm -rf /opt/src/modifications
</nowiki></pre>

* Clone the webos-internals modifications repository:
<pre><nowiki>
cd /opt/src
git clone git://gitorious.org/webos-internals/modifications.git
</nowiki></pre>

==Importing and Applying Patches==

* Ensure your list of modifications is up to date
<pre><nowiki>
cd /opt/src/modifications
git pull
</nowiki></pre>
** If you find yourself getting errors when you try to pull with the above command then you will need to modify your .git/config file
<pre><nowiki>
sudo vi /opt/src/modifications/.git/config
</nowiki></pre>

** Your [master] section should look like the following
<pre><nowiki>
[branch "master"]
remote = origin
merge = refs/heads/master
</nowiki></pre>

* Browse the set of available patches. Each patch should have a description at the top.
<pre><nowiki>
find /opt/src/modifications -name *.patch
</nowiki></pre>

* Choose a patch from the modifications repository and import it into your own patches directory:
<pre><nowiki>
cd / # It is *very* important to be in the / directory when you run quilt.
quilt import /opt/src/modifications/application_name/patch_name.patch # Note that you need to replace application_name and patch_name here.
</nowiki></pre>

* Verify that quilt has imported the patch successfully:
<pre><nowiki>
# You should still be in the / directory to run quilt.
quilt series # you should see your patch listed in here
</nowiki></pre>

* Instruct quilt to apply your patch
<pre><nowiki>
# You should still be in the / directory to run quilt.
quilt push
# Use this to push all patches at once.
quilt push -a
</nowiki></pre>

* If everything worked correctly, the patch should now be applied. You will usually need to restart the luna service on the Pre to see the effect of patches to applications. Here's how to initiate a rescan.
<pre><nowiki>
luna-send -n 1 palm://com.palm.applicationManager/rescan {}
</nowiki></pre>

If that doesn't work, try a service restart with:
<pre><nowiki>
stop LunaSysMgr && start LunaSysMgr
</nowiki></pre>

And if all else fails, simply reboot:
<pre><nowiki>
reboot
</nowiki></pre>

==Listing Applied Patches==
<pre><nowiki>
cd / # It is *very* important to be in the / directory when you run quilt.
quilt applied
</nowiki></pre>

==Removing All Patches==

Before you accept an over-the-air (OTA) update, you should remove any patches you have applied. Luckily, using quilt makes this very easy.

* Remove all patches:
<pre><nowiki>
cd / # It is *very* important to be in the / directory when you run quilt.
quilt pop -a
</nowiki></pre>

==Reapplying all patches==

After your OTA update is complete, you will want to reapply any patches you have selected. This may or may not go smoothly.

* Apply all patches:
<pre><nowiki>
cd / # It is *very* important to be in the / directory when you run quilt.
quilt push -a
</nowiki></pre>

* Put your Pre back in to Read Only mode
<pre><nowiki>
mount -o remount,ro /
</nowiki></pre>

==Quilt Commands==

Other commands when using Quilt-Lite:

Please feel free to add/edit this section. I am not an expert, these are commands that I found by accident when i misspelled delete.

<pre><nowiki>
quilt
add
applied (shows applied/installed patches)
delete (removes a patch from quilt series ex: quilt delete *name of patch*)
diff
edit
files
fold
fork
graph
grep
header
import (downloads patch from git ex: quilt import *name of patch*)
mail
new
next
patches
pop
previous
push (installs patches from quilt series one at a time. quilt push -a installs all patches)
refresh
rename
revert
series (shows all downloaded patches.)
setup
snapshot
top
unapplied
upgrade

</nowiki></pre>

==Information for developing patches==

===Getting Authenticated with gitorious.org===
Before you can commit to gitorious you need to [http://gitorious.org/users/new create an account].

Next, you'll need to create a public/private key pair, and the easiest way to do this is with openssh. If you want to create a pair with windows, there are PuTTYgen/Pageant instructions below under "Alternate Windows Method", but the following may be easier. After you generate a public key you'll share it with gitorious.org; your public key is how gitorious.org authenticates you and checks if have the permissions required to do a commit to a given repository.
<pre><nowiki>
ipkg-opt update
ipkg-opt install openssh # *see Note Below
sudo ssh-keygen -t rsa # follow the prompts, ensure you're saving to /var/home/root/.ssh
cat /var/home/root/.ssh/id_rsa.pub # copy the output and paste it into gitorious key manager
</nowiki></pre>
<nowiki>*</nowiki>There's been some work to get dropbear working, but this tutorial assumes you have openssh installed. For information about dropbear and ssh keys, see [http://tumblelog.jauderho.com/post/151678345/using-dropbear-with-git this page]
* Don't forget to upload your public key from the last statement above to gitorious.org

Next, you'll need to ensure you have your environment properly configured.

<pre><nowiki>
echo $GIT_SSH # Should be /opt/bin/openssh-ssh
</nowiki></pre>

If the output of this command are anything other than /opt/bin/openssh-ssh, you'll need to update /etc/profile.d/optware. Add

<pre><nowiki>
export GIT_SSH=/opt/bin/openssh-ssh
</nowiki></pre>

To the top of the /etc/profile.d/optware.

Now you should be able to follow the steps below and contribute your code to gitorious.org.

'''Alternate Windows Method'''

The only reasons you might want to pursue this method is if you want to generate a ssh key pair on a Windows box.

Getting your key on window
* Download [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html PuTTYgen] and [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Pageant]

--Gitorious.org [http://gitorious.org/about/faq gitorious.org recommends] you use [http://code.google.com/p/msysgit/ msysGit].--

* On Windows use [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html PuTTYgen] to generate a public/private key pair.

<pre><nowiki>
Key -> SSH-2 RSA KEY
Key -> Generate key pair
</nowiki></pre>
After some wiggling of the mouse your keys will be generated. You should fill in the //Key passphrase// and it's confirmation to secure you key. Save off the public and private key pairs to your user folder.

* After which you will need to run [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Pageant] on your pc. Pageant holds your private key in memory for PuTTY to use.

===Creating a patch===

* Before making any changes to files:

<pre><nowiki>
cd / # It is *very* important to be in the / directory when you run quilt.
quilt new patch_name.patch
quilt add /usr/palm/applications/com.palm.app.appYouWantToMod/app/controllers/mod-assistant.js
quilt add /usr/palm/applications/com.palm.app.appYouWantToMod/app/controllers/mod2-assistant.js
</nowiki></pre>

* Now you can make changes on the Pre using vi/nano/joe/whatever, or sftp files to your machine and make changes. Make sure any file you change has been added in the above step.

<pre><nowiki>
quilt files # view files that are being tracked
quilt header -e # add a header to the patch to describe it (please do this!)
</nowiki></pre>

* Once you are finished and ready to create a patch

<pre><nowiki>
quilt refresh # this will create/update the /opt/src/patches/patch_name.patch file
</nowiki></pre>

===Pushing the change back to gitorious.org===

* copy the patch into the modification tree you cloned above

<pre><nowiki>
mkdir /opt/src/modifications/application_name # You need to change application_name to the leaf of the palm application id.
cp /opt/src/patches/patch_name.patch /opt/src/modifications/application_name/patch_name.patch
</nowiki></pre>

* Identify yourself in git (use the user you have setup at gitorious.org)

<pre><nowiki>
cd /opt/src/modifications
git config --global user.name "user"
git config --global user.email "youremail@example.com"
</nowiki></pre>

* Commit your changes to your local git

<pre><nowiki>
git add application_name/patch_name.patch
git commit
</nowiki></pre>

* Since we did a clone the first time, we need to recreate the origin:

<pre><nowiki>
git remote rm origin # (if you did a clone, we have to replace the origin)
git remote add origin git@gitorious.org:webos-internals/modifications.git
</nowiki></pre>
*This will destroy your ability to actually pull down updates, so you'll need to modify the /opt/src/modifications/.git/config to contain:

<pre><nowiki>
[branch "master"]
remote = origin
merge = refs/heads/master
</nowiki></pre>
* Finally, push your changes up to gitorious.org

<pre><nowiki>
git push origin master # first time
git push # any future pushes
</nowiki></pre>

* If the push does not work, try to debug the ssh connection
<pre><nowiki>
/opt/bin/ssh -v git@gitorious.org
</nowiki></pre>

==Extended, annotated sample session with quilt==
* First, we just need to setup a file to muck with
<pre><nowiki>
root@castle:/# cd /
root@castle:/# echo "Original file" > /usr/test
root@castle:/# echo "2nd lien" >> /usr/test
root@castle:/# echo "3rd ilne" >> /usr/test
root@castle:/# echo "last line" >> /usr/test
</nowiki></pre>
* Start a new patch (normally you'll want to use patch_name.patch, I just wanted a shortened name)
<pre><nowiki>
root@castle:/# quilt new p1
Patch /opt/src/patches/p1 is now on top
</nowiki></pre>
* You must quilt add any files that you are going to edit or create '''before''' you edit or create them.
<pre><nowiki>
root@castle:/# quilt add /usr/test
File /usr/test added to patch /opt/src/patches/p1
</nowiki></pre>
* Just using sed to correct the spelling on the 2nd line
<pre><nowiki>
root@castle:/# sed -i -e 's/lien/line/' /usr/test
</nowiki></pre>
* quilt refresh actually finds what you have changed and writes it to the patch file (at this point, you can use git to push your changes)
<pre><nowiki>
root@castle:/# quilt refresh
Refreshed patch /opt/src/patches/p1
</nowiki></pre>
* Just for fun, let's do it again
<pre><nowiki>
root@castle:/# quilt new p2
Patch /opt/src/patches/p2 is now on top
</nowiki></pre>
* Again, add file, make some changes, refresh to update the patch.
<pre><nowiki>
root@castle:/# quilt add /usr/test
File /usr/test added to patch /opt/src/patches/p2
root@castle:/# sed -i -e 's/ilne/line/' /usr/test
root@castle:/# quilt refresh
Refreshed patch /opt/src/patches/p2
</nowiki></pre>
* Just an example of rolling back changes
<pre><nowiki>
root@castle:/# quilt pop
Removing patch /opt/src/patches/p2
Restoring usr/test

Now at patch /opt/src/patches/p1
root@castle:/# quilt pop
Removing patch /opt/src/patches/p1
Restoring usr/test

Now at patch /opt/src/patches/enable-browser-downloads.patch
root@castle:/# cat /usr/test
Original file
2nd lien
3rd ilne
last line
</nowiki></pre>
* delete will delete the patch from your series, but leave the actual patch file in /opt/src/patches (so you could import it later)
<pre><nowiki>
root@castle:/# quilt delete p1
Removed patch /opt/src/patches/p1
</nowiki></pre>
* Since we removed p1, push will now apply p2. However, since p2 was applied against p1 originally, p2 will report an error. If the changes are too significant, you can force with -f, but you should carefully inspect the resulting files.
<pre><nowiki>
root@castle:/# quilt push
Applying patch /opt/src/patches/p2
patching file usr/test
Hunk #1 succeeded at 1 with fuzz 2.

Now at patch /opt/src/patches/p2
</nowiki></pre>
* If we want, we can refresh the patch so that future users of the patch do not receive the "fuzz" warning.
<pre><nowiki>
root@castle:/# quilt refresh
Refreshed patch /opt/src/patches/p2
root@castle:/# cat /usr/test
Original file
2nd lien
3rd line
last line
</nowiki></pre>
* cleanup
<pre><nowiki>
root@castle:/# rm /usr/test
</nowiki></pre>

==Background info==

* [http://pkg-perl.alioth.debian.org/howto/quilt.html quilt]

==Script for Updating/Installing Patches==

I just wanted to share the following script that I just finished testing out. It's only been tested on my Pre so far, as I don't have access to any others.. It just updates the patch list, prints out available patches, then lets you choose which to apply.

<pre><nowiki>
#!/opt/bin/bash

cd /opt/src/modifications
tput clear
echo Updating list...
git pull
tput clear
cd /

a=0
for inputline in $(find /opt/src/modifications -name *.patch | sort)
do
a=$(($a+1));
line="$(echo $inputline)"
MYARRAY[$a]="$line"
echo "${a}${line}" | awk -F "/" 'sub(".patch","",$6) {printf "%-3s %-15s %s\n", $1, $5, $6}'
done
echo "q quit"

x=$(($a+1));
until [ -n "$opt" ] ; do
read -p "Enter the line number for patch to apply [1 - $a] " opt
if [ "$opt" = "q" ] ; then
exit 0
fi
if [ "$opt" -lt "$x" 2> /dev/null ] && [ "$opt" -gt 0 2> /dev/null ] ; then
true
else
opt=""
fi
done

tput clear
cd /
quilt import ${MYARRAY[$opt]}
quilt push
luna-send -n 1 palm://com.palm.applicationManager/rescan {}

</nowiki></pre>

WebOS 2.0 Patch Status Project

2010-11-22T17:20:27Z

Rboatright: pp

With the release of the webOS 2.0 doctor and the webOS 2.0 SDK anyone can help us ensure that patches come through the forthcoming announced 2.0 update for all phones. Please help us by testing each of the patches below on webOS 2.0. If it just works, please edit that section and mark it as working If it does not work, please make a note about what is wrong. If you fixed it, please upload the fixed patch to DBSOONER's patch portal at [http://webos-patches.dbsooner.com/] and mark it as fixed here along with your name and contact information. If you have determined that this patch is deprecated in 2.0, please note that and provide an explanation as to why. Thanks for all your help.

'''Status'''

Unverified: 146
Working: 0
Deprecated: 0
Fixed: 0
==================
Total: 146

== Section: Advanced ==

<table border="1">

<tr>
<td>
'''Advanced Configuration for System Preferences'''
</td>
<td>
1.4.5-89
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Advanced Configuration for System Preferences - WORLD'''
</td>
<td>
1.4.5-89
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: App Catalog ==

<table border="1">

<tr>
<td>
'''Hide App Vendors'''
</td>
<td>
1.4.5-28
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dsevil
</td>
</tr>
<tr>
<td></td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Show App Details'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Show Download Count'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Author: Brian Jost, Maintainer: dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: App Launcher ==

<table border="1">

<tr>
<td>
'''4x4 Icons v1'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''4x4 Icons v2'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
PuffTheMagic, dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''4x4 Icons v3'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
onlinespending
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''4x4 icons v4 No Arrows Plus More'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cwgtex
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''4x4 Icons v5'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cwgtex
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''5x4 Icons v1'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Mitchell , dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''5x4 Icons v2'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
flare576, dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''5x5 Icons v1'''
</td>
<td>
1.4.5-14
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
StoneRyno
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Advanced Configuration for App Launcher'''
</td>
<td>
1.4.5-73
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Advanced Options in Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Black Font in Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
2sslow
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Enable Add/Delete Pages'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Rod Whitby
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Fully Transparent Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mhous33
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Gesture Tap for Info and Delete'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Glass Effect'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
SqyArc
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide Amazon MP3 App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cryptk (Chris Jowett) , v3ritas (Sean McAd
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide Musicplayer App'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, noir
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide Nascar App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, noir, cryptk (Chris Jowett), v3ritas
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide NFL App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cryptk, noir, v3ritas
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide Quick Launch Bar'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide Quick Launch Bar in Launcher Only'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide Quick Launch Bar in Launcher Remix'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide Sprint Navigation App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
v3ritas , opacityzero
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide YouTube App'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
veritas06 (Sean McAdam)
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Launcher Auto-Popup'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Launcher Page Selection Tabs'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lmorchard
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Lite List Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Owen Bickford
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Named Pages in the Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lmorchard
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''No Arrows or Fade Bar'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cwgtex
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Remove Icon Titles'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Abyssul
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Reset Scroll Position'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Reset to First Page'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Reset to Middle Page'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Scrim System Screens'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Warlord9159
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Show FirstUse App'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jack87
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Unhide Dev Mode Icon'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jauder Ho
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Wrap Pages'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr , dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Browser ==

<table border="1">

<tr>
<td>
'''Add Open URL Menu Option'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add Option to Send Link Message'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add Shortcut Keys'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add To Spare Time'''
</td>
<td>
1.4.5-70
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Darrin Holst
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Allow Browser in Low Mem'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
diomark , dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Auto Hide All Icons After Page Load'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Bad Kitty Super Mix'''
</td>
<td>
1.4.5-98
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Bookmarks List Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Bookmarks Tile Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Browser Scrollbar'''
</td>
<td>
1.4.5-90
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
veerar
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Change Number of Bookmarks on Startpage'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jmartino2011
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Disable Landscape Gesture Scroll'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Fullscreen Mode Browser'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Gesture Click Open In New Card'''
</td>
<td>
1.4.5-26
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
bsiegel
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''GestureClick Context Menu'''
</td>
<td>
1.4.5-26
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Fritzens
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hold Tap Context Menu'''
</td>
<td>
1.4.5-96
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
n1ce
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Mega Mix'''
</td>
<td>
1.4.5-102
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Multi Mod'''
</td>
<td>
1.4.5-36
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406 , daventx, Mark Klein, drnull
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Neato that URL'''
</td>
<td>
1.4.5-101
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''New Card Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''No Auto Refresh After Idle'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Raise Image Resolution Limit'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
edit_text
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Send to Relego'''
</td>
<td>
1.4.5-35
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
spdsktr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Shake to Reload'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Share Image Message Option'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Slider Blocks Orientation Change'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
KeyToss
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Spaz Beta Super Mix'''
</td>
<td>
1.4.5-99
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Spaz Super Mix'''
</td>
<td>
1.4.5-99
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Swipe History Auto Confirm'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, Wtgreen
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Twee Super Mix'''
</td>
<td>
1.4.5-98
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet URL and Title via Bad Kitty'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet URL and Title via Spaz'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet URL and Title via Twee'''
</td>
<td>
1.4.5-78
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet via Bad Kitty and Add to Relego'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet via Bad Kitty and Add to Spare Time'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet via Spaz and Add to Relego'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet via Spaz and Add to Spare Time'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet via Twee and Add to Relego'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet via Twee and Add to Spare Time'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''URL Shorten in Browser'''
</td>
<td>
1.4.5-97
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Thomas Coe , Jeremy Thomas
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Calculator ==

<table border="1">

<tr>
<td>
'''Enable Vibration'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dallashigh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Calendar ==

<table border="1">

<tr>
<td>
'''15 Minute Intervals Only'''
</td>
<td>
1.4.5-84
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Chris Mann
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add additional default event length times'''
</td>
<td>
1.4.5-22
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
aric
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add One Minute Interval'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
aric
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''All-Day Events in Month View'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
daventx, d2globalinc, Hopspitfire
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Bridge Call Dialer Calendar Launcher'''
</td>
<td>
1.4.5-78
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ahub-dev
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Create Birthday Events'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
MetaView
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Default to Month View'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
matthewn
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Default to Week View'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
matthewn
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Disable Compressed View'''
</td>
<td>
1.4.5-80
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CRaiaSoftware
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Edit Item as New'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lexb
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Full Day View Calendar'''
</td>
<td>
1.4.5-30
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Lawren Quigley-Jones
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''More Reminder Alarm Times'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, wtgreen
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''New Event Icons and Shortcuts'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''No Snooze for Banner'''
</td>
<td>
1.4.5-21
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CRaia Software
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Notification Repeat'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Notification Repeat German Localisation'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sockenfresser
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Reminder Times Patch v2'''
</td>
<td>
1.4.5-18
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
4wheels
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Snooze Alternate Behavior'''
</td>
<td>
1.4.5-21
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CRaia Software
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Snooze Duration Selection'''
</td>
<td>
1.4.5-34
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''UberCalendar'''
</td>
<td>
1.4.5-75
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
MetaView
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''UberCalendar Multilingual Localization'''
</td>
<td>
1.4.5-101
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Kratus
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Wrap Location Field'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lordbah
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Camera ==

<table border="1">

<tr>
<td>
'''Capture With All Keys'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Capture with Volume Keys'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
tk102
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Improved Photo Naming CIMG'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Improved Photo Naming PIXI'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Improved Photo Naming PRE'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Launch Camera when Unlocked in Landscape'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Mijoro
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Simple Shutter Sound Off'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid, jhoff80
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Video Camera Flashlight'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Clock ==

<table border="1">

<tr>
<td>
'''Add Space Between Snooze and Dismiss'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr , dBsooner
</td>
</tr>
<tr>
<td></td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Alarm Daily Options'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
romanodog
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Lock Alarm and Clock to portrait'''
</td>
<td>
1.4.5-90
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Warlord9159
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''More Default Snooze Times'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Open to Alarm List'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
akamil
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Enable Hidden Clock'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
frankos72
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Contacts ==

<table border="1">

<tr>
<td>
'''Add Sync Now'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Additional Contact Labels'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Additional Speed Dial Keys'''
</td>
<td>
1.4.5-22
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CraiaSoftware
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''GSM-display-phone-numbers-as-synced'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
DIck99999
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Per-Contact Call Rejection'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
JackieRipper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Scrim Contacts'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mracer29
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Send All Contacts via Email'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
bsiegel
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Swipe to Delete'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Email ==

<table border="1">

<tr>
<td>
'''Actual Words Instead Of Icons'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add Move and Mark Unread Buttons'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Chris Mann
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add Move to Folder Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add Priority Discard Btns'''
</td>
<td>
1.4.5-88
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Additional Days for Syncing Mail'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Confirm Delete'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jhoff80
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Delete Email and View Next - Deluxe'''
</td>
<td>
1.4.5-96
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
theinnkeeper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Delete Email and View Next - Older Message'''
</td>
<td>
1.4.5-78
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
theinnkeeper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Delete From Notification'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''eMail-Compose-AskToSend'''
</td>
<td>
1.4.5-58
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Fritz Amtmann
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Email Mega Mix'''
</td>
<td>
1.4.5-100
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Email Save Confirmation'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Enable Landscape Email'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
user , SirWill, dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hold Tap Context Menu'''
</td>
<td>
1.4.5-96
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
n1ce
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Launch Calendar from invite email'''
</td>
<td>
1.4.5-77
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ahub
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Mimic Outlook Formating on Email Replies'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jonolee
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Mojo ==

<table border="1">

<tr>
<td>
'''Virtual Keyboard'''
</td>
<td>
1.4.5-10
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Eric J Gaudet
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Unavailable ==

<table border="1">

<tr>
<td>
'''Delete Email and View Next - Newer Message'''
</td>
<td>
1.4.5-0
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
theinnkeeper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>
</body>
</html>

WebOS 2.0 Patch Status Project

2010-11-21T05:15:33Z

Rboatright: 10

With the release of the webOS 2.0 doctor and the webOS 2.0 SDK anyone can help us ensure that patches come through the forthcoming announced 2.0 update for all phones. Please help us by testing each of the patches below on webOS 2.0. If it just works, please edit that section and mark it as working If it does not work, please make a note about what is wrong. If you fixed it, please upload the fixed patch to _________________________ and mark it as fixed here along with your name and contact information. If you have determined that this patch is deprecated in 2.0, please note that and provide an explanation as to why. Thanks for all your help.

'''Status'''

Unverified: 146
Working: 0
Deprecated: 0
Fixed: 0
==================
Total: 146

== Section: Advanced ==

<table border="1">

<tr>
<td>
'''Advanced Configuration for System Preferences'''
</td>
<td>
1.4.5-89
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Advanced Configuration for System Preferences - WORLD'''
</td>
<td>
1.4.5-89
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: App Catalog ==

<table border="1">

<tr>
<td>
'''Hide App Vendors'''
</td>
<td>
1.4.5-28
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dsevil
</td>
</tr>
<tr>
<td></td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Show App Details'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Show Download Count'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Author: Brian Jost, Maintainer: dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: App Launcher ==

<table border="1">

<tr>
<td>
'''4x4 Icons v1'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''4x4 Icons v2'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
PuffTheMagic, dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''4x4 Icons v3'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
onlinespending
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''4x4 icons v4 No Arrows Plus More'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cwgtex
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''4x4 Icons v5'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cwgtex
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''5x4 Icons v1'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Mitchell , dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''5x4 Icons v2'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
flare576, dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''5x5 Icons v1'''
</td>
<td>
1.4.5-14
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
StoneRyno
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Advanced Configuration for App Launcher'''
</td>
<td>
1.4.5-73
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Advanced Options in Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Black Font in Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
2sslow
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Enable Add/Delete Pages'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Rod Whitby
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Fully Transparent Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mhous33
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Gesture Tap for Info and Delete'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Glass Effect'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
SqyArc
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide Amazon MP3 App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cryptk (Chris Jowett) , v3ritas (Sean McAd
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide Musicplayer App'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, noir
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide Nascar App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, noir, cryptk (Chris Jowett), v3ritas
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide NFL App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cryptk, noir, v3ritas
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide Quick Launch Bar'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide Quick Launch Bar in Launcher Only'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide Quick Launch Bar in Launcher Remix'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide Sprint Navigation App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
v3ritas , opacityzero
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hide YouTube App'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
veritas06 (Sean McAdam)
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Launcher Auto-Popup'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Launcher Page Selection Tabs'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lmorchard
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Lite List Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Owen Bickford
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Named Pages in the Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lmorchard
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''No Arrows or Fade Bar'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cwgtex
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Remove Icon Titles'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Abyssul
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Reset Scroll Position'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Reset to First Page'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Reset to Middle Page'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Scrim System Screens'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Warlord9159
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Show FirstUse App'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jack87
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Unhide Dev Mode Icon'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jauder Ho
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Wrap Pages'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr , dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Browser ==

<table border="1">

<tr>
<td>
'''Add Open URL Menu Option'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add Option to Send Link Message'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add Shortcut Keys'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add To Spare Time'''
</td>
<td>
1.4.5-70
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Darrin Holst
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Allow Browser in Low Mem'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
diomark , dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Auto Hide All Icons After Page Load'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Bad Kitty Super Mix'''
</td>
<td>
1.4.5-98
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Bookmarks List Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Bookmarks Tile Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Browser Scrollbar'''
</td>
<td>
1.4.5-90
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
veerar
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Change Number of Bookmarks on Startpage'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jmartino2011
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Disable Landscape Gesture Scroll'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Fullscreen Mode Browser'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Gesture Click Open In New Card'''
</td>
<td>
1.4.5-26
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
bsiegel
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''GestureClick Context Menu'''
</td>
<td>
1.4.5-26
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Fritzens
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hold Tap Context Menu'''
</td>
<td>
1.4.5-96
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
n1ce
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Mega Mix'''
</td>
<td>
1.4.5-102
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Multi Mod'''
</td>
<td>
1.4.5-36
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406 , daventx, Mark Klein, drnull
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Neato that URL'''
</td>
<td>
1.4.5-101
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''New Card Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''No Auto Refresh After Idle'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Raise Image Resolution Limit'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
edit_text
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Send to Relego'''
</td>
<td>
1.4.5-35
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
spdsktr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Shake to Reload'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Share Image Message Option'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Slider Blocks Orientation Change'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
KeyToss
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Spaz Beta Super Mix'''
</td>
<td>
1.4.5-99
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Spaz Super Mix'''
</td>
<td>
1.4.5-99
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Swipe History Auto Confirm'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, Wtgreen
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Twee Super Mix'''
</td>
<td>
1.4.5-98
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet URL and Title via Bad Kitty'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet URL and Title via Spaz'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet URL and Title via Twee'''
</td>
<td>
1.4.5-78
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet via Bad Kitty and Add to Relego'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet via Bad Kitty and Add to Spare Time'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet via Spaz and Add to Relego'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet via Spaz and Add to Spare Time'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet via Twee and Add to Relego'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Tweet via Twee and Add to Spare Time'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''URL Shorten in Browser'''
</td>
<td>
1.4.5-97
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Thomas Coe , Jeremy Thomas
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Calculator ==

<table border="1">

<tr>
<td>
'''Enable Vibration'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dallashigh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Calendar ==

<table border="1">

<tr>
<td>
'''15 Minute Intervals Only'''
</td>
<td>
1.4.5-84
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Chris Mann
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add additional default event length times'''
</td>
<td>
1.4.5-22
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
aric
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add One Minute Interval'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
aric
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''All-Day Events in Month View'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
daventx, d2globalinc, Hopspitfire
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Bridge Call Dialer Calendar Launcher'''
</td>
<td>
1.4.5-78
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ahub-dev
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Create Birthday Events'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
MetaView
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Default to Month View'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
matthewn
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Default to Week View'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
matthewn
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Disable Compressed View'''
</td>
<td>
1.4.5-80
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CRaiaSoftware
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Edit Item as New'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lexb
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Full Day View Calendar'''
</td>
<td>
1.4.5-30
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Lawren Quigley-Jones
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''More Reminder Alarm Times'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, wtgreen
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''New Event Icons and Shortcuts'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''No Snooze for Banner'''
</td>
<td>
1.4.5-21
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CRaia Software
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Notification Repeat'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Notification Repeat German Localisation'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sockenfresser
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Reminder Times Patch v2'''
</td>
<td>
1.4.5-18
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
4wheels
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Snooze Alternate Behavior'''
</td>
<td>
1.4.5-21
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CRaia Software
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Snooze Duration Selection'''
</td>
<td>
1.4.5-34
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''UberCalendar'''
</td>
<td>
1.4.5-75
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
MetaView
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''UberCalendar Multilingual Localization'''
</td>
<td>
1.4.5-101
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Kratus
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Wrap Location Field'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lordbah
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Camera ==

<table border="1">

<tr>
<td>
'''Capture With All Keys'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Capture with Volume Keys'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
tk102
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Improved Photo Naming CIMG'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Improved Photo Naming PIXI'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Improved Photo Naming PRE'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Launch Camera when Unlocked in Landscape'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Mijoro
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Simple Shutter Sound Off'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid, jhoff80
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Video Camera Flashlight'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Clock ==

<table border="1">

<tr>
<td>
'''Add Space Between Snooze and Dismiss'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr , dBsooner
</td>
</tr>
<tr>
<td></td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Alarm Daily Options'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
romanodog
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Lock Alarm and Clock to portrait'''
</td>
<td>
1.4.5-90
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Warlord9159
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''More Default Snooze Times'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Open to Alarm List'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
akamil
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Enable Hidden Clock'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
frankos72
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Contacts ==

<table border="1">

<tr>
<td>
'''Add Sync Now'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Additional Contact Labels'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Additional Speed Dial Keys'''
</td>
<td>
1.4.5-22
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CraiaSoftware
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''GSM-display-phone-numbers-as-synced'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
DIck99999
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Per-Contact Call Rejection'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
JackieRipper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Scrim Contacts'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mracer29
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Send All Contacts via Email'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
bsiegel
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Swipe to Delete'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Email ==

<table border="1">

<tr>
<td>
'''Actual Words Instead Of Icons'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add Move and Mark Unread Buttons'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Chris Mann
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add Move to Folder Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Add Priority Discard Btns'''
</td>
<td>
1.4.5-88
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Additional Days for Syncing Mail'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Confirm Delete'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jhoff80
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Delete Email and View Next - Deluxe'''
</td>
<td>
1.4.5-96
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
theinnkeeper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Delete Email and View Next - Older Message'''
</td>
<td>
1.4.5-78
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
theinnkeeper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Delete From Notification'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''eMail-Compose-AskToSend'''
</td>
<td>
1.4.5-58
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Fritz Amtmann
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Email Mega Mix'''
</td>
<td>
1.4.5-100
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Email Save Confirmation'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Enable Landscape Email'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
user , SirWill, dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Hold Tap Context Menu'''
</td>
<td>
1.4.5-96
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
n1ce
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Launch Calendar from invite email'''
</td>
<td>
1.4.5-77
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ahub
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
'''Mimic Outlook Formating on Email Replies'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jonolee
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Mojo ==

<table border="1">

<tr>
<td>
'''Virtual Keyboard'''
</td>
<td>
1.4.5-10
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Eric J Gaudet
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Unavailable ==

<table border="1">

<tr>
<td>
'''Delete Email and View Next - Newer Message'''
</td>
<td>
1.4.5-0
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
theinnkeeper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>
</body>
</html>

WebOS 2.0 Patch Status Project

2010-11-21T05:11:36Z

Rboatright: t8

With the release of the webOS 2.0 doctor and the webOS 2.0 SDK anyone can help us ensure that patches come through the forthcoming announced 2.0 update for all phones. Please help us by testing each of the patches below on webOS 2.0. If it just works, please edit that section and mark it as working If it does not work, please make a note about what is wrong. If you fixed it, please upload the fixed patch to _________________________ and mark it as fixed here along with your name and contact information. If you have determined that this patch is deprecated in 2.0, please note that and provide an explanation as to why. Thanks for all your help.

'''Status'''

Unverified: 146
Working: 0
Deprecated: 0
Fixed: 0
==================
Total: 146

== Section: Advanced ==

<table border="1">

<tr>
<td>
‘‘‘Advanced Configuration for System Preferences'''
</td>
<td>
1.4.5-89
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Advanced Configuration for System Preferences - WORLD'''
</td>
<td>
1.4.5-89
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: App Catalog ==

<table border="1">

<tr>
<td>
‘‘‘Hide App Vendors'''
</td>
<td>
1.4.5-28
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dsevil
</td>
</tr>
<tr>
<td></td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Show App Details'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Show Download Count'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Author: Brian Jost, Maintainer: dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: App Launcher ==

<table border="1">

<tr>
<td>
‘‘‘4x4 Icons v1'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘4x4 Icons v2'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
PuffTheMagic, dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘4x4 Icons v3'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
onlinespending
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘4x4 icons v4 No Arrows Plus More'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cwgtex
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘4x4 Icons v5'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cwgtex
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘5x4 Icons v1'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Mitchell , dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘5x4 Icons v2'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
flare576, dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘5x5 Icons v1'''
</td>
<td>
1.4.5-14
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
StoneRyno
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Advanced Configuration for App Launcher'''
</td>
<td>
1.4.5-73
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Advanced Options in Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Black Font in Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
2sslow
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Enable Add/Delete Pages'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Rod Whitby
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Fully Transparent Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mhous33
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Gesture Tap for Info and Delete'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Glass Effect'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
SqyArc
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide Amazon MP3 App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cryptk (Chris Jowett) , v3ritas (Sean McAd
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide Musicplayer App'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, noir
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide Nascar App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, noir, cryptk (Chris Jowett), v3ritas
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide NFL App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cryptk, noir, v3ritas
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide Quick Launch Bar'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide Quick Launch Bar in Launcher Only'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide Quick Launch Bar in Launcher Remix'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide Sprint Navigation App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
v3ritas , opacityzero
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide YouTube App'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
veritas06 (Sean McAdam)
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Launcher Auto-Popup'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Launcher Page Selection Tabs'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lmorchard
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Lite List Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Owen Bickford
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Named Pages in the Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lmorchard
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘No Arrows or Fade Bar'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cwgtex
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Remove Icon Titles'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Abyssul
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Reset Scroll Position'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Reset to First Page'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Reset to Middle Page'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Scrim System Screens'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Warlord9159
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Show FirstUse App'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jack87
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Unhide Dev Mode Icon'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jauder Ho
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Wrap Pages'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr , dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Browser ==

<table border="1">

<tr>
<td>
‘‘‘Add Open URL Menu Option'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add Option to Send Link Message'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add Shortcut Keys'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add To Spare Time'''
</td>
<td>
1.4.5-70
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Darrin Holst
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Allow Browser in Low Mem'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
diomark , dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Auto Hide All Icons After Page Load'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Bad Kitty Super Mix'''
</td>
<td>
1.4.5-98
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Bookmarks List Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Bookmarks Tile Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Browser Scrollbar'''
</td>
<td>
1.4.5-90
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
veerar
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Change Number of Bookmarks on Startpage'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jmartino2011
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Disable Landscape Gesture Scroll'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Fullscreen Mode Browser'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Gesture Click Open In New Card'''
</td>
<td>
1.4.5-26
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
bsiegel
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘GestureClick Context Menu'''
</td>
<td>
1.4.5-26
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Fritzens
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hold Tap Context Menu'''
</td>
<td>
1.4.5-96
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
n1ce
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Mega Mix'''
</td>
<td>
1.4.5-102
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Multi Mod'''
</td>
<td>
1.4.5-36
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406 , daventx, Mark Klein, drnull
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Neato that URL'''
</td>
<td>
1.4.5-101
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘New Card Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘No Auto Refresh After Idle'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Raise Image Resolution Limit'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
edit_text
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Send to Relego'''
</td>
<td>
1.4.5-35
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
spdsktr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Shake to Reload'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Share Image Message Option'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Slider Blocks Orientation Change'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
KeyToss
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Spaz Beta Super Mix'''
</td>
<td>
1.4.5-99
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Spaz Super Mix'''
</td>
<td>
1.4.5-99
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Swipe History Auto Confirm'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, Wtgreen
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Twee Super Mix'''
</td>
<td>
1.4.5-98
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet URL and Title via Bad Kitty'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet URL and Title via Spaz'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet URL and Title via Twee'''
</td>
<td>
1.4.5-78
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet via Bad Kitty and Add to Relego'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet via Bad Kitty and Add to Spare Time'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet via Spaz and Add to Relego'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet via Spaz and Add to Spare Time'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet via Twee and Add to Relego'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet via Twee and Add to Spare Time'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘URL Shorten in Browser'''
</td>
<td>
1.4.5-97
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Thomas Coe , Jeremy Thomas
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Calculator ==

<table border="1">

<tr>
<td>
‘‘‘Enable Vibration'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dallashigh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Calendar ==

<table border="1">

<tr>
<td>
‘‘‘15 Minute Intervals Only'''
</td>
<td>
1.4.5-84
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Chris Mann
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add additional default event length times'''
</td>
<td>
1.4.5-22
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
aric
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add One Minute Interval'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
aric
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘All-Day Events in Month View'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
daventx, d2globalinc, Hopspitfire
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Bridge Call Dialer Calendar Launcher'''
</td>
<td>
1.4.5-78
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ahub-dev
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Create Birthday Events'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
MetaView
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Default to Month View'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
matthewn
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Default to Week View'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
matthewn
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Disable Compressed View'''
</td>
<td>
1.4.5-80
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CRaiaSoftware
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Edit Item as New'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lexb
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Full Day View Calendar'''
</td>
<td>
1.4.5-30
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Lawren Quigley-Jones
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘More Reminder Alarm Times'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, wtgreen
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘New Event Icons and Shortcuts'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘No Snooze for Banner'''
</td>
<td>
1.4.5-21
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CRaia Software
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Notification Repeat'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Notification Repeat German Localisation'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sockenfresser
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Reminder Times Patch v2'''
</td>
<td>
1.4.5-18
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
4wheels
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Snooze Alternate Behavior'''
</td>
<td>
1.4.5-21
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CRaia Software
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Snooze Duration Selection'''
</td>
<td>
1.4.5-34
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘UberCalendar'''
</td>
<td>
1.4.5-75
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
MetaView
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘UberCalendar Multilingual Localization'''
</td>
<td>
1.4.5-101
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Kratus
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Wrap Location Field'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lordbah
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Camera ==

<table border="1">

<tr>
<td>
‘‘‘Capture With All Keys'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Capture with Volume Keys'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
tk102
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Improved Photo Naming CIMG'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Improved Photo Naming PIXI'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Improved Photo Naming PRE'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Launch Camera when Unlocked in Landscape'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Mijoro
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Simple Shutter Sound Off'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid, jhoff80
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Video Camera Flashlight'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Clock ==

<table border="1">

<tr>
<td>
‘‘‘Add Space Between Snooze and Dismiss'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr , dBsooner
</td>
</tr>
<tr>
<td></td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Alarm Daily Options'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
romanodog
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Lock Alarm and Clock to portrait'''
</td>
<td>
1.4.5-90
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Warlord9159
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘More Default Snooze Times'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Open to Alarm List'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
akamil
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Enable Hidden Clock'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
frankos72
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Contacts ==

<table border="1">

<tr>
<td>
‘‘‘Add Sync Now'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Additional Contact Labels'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Additional Speed Dial Keys'''
</td>
<td>
1.4.5-22
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CraiaSoftware
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘GSM-display-phone-numbers-as-synced'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
DIck99999
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Per-Contact Call Rejection'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
JackieRipper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Scrim Contacts'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mracer29
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Send All Contacts via Email'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
bsiegel
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Swipe to Delete'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Email ==

<table border="1">

<tr>
<td>
‘‘‘Actual Words Instead Of Icons'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add Move and Mark Unread Buttons'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Chris Mann
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add Move to Folder Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add Priority Discard Btns'''
</td>
<td>
1.4.5-88
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Additional Days for Syncing Mail'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Confirm Delete'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jhoff80
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Delete Email and View Next - Deluxe'''
</td>
<td>
1.4.5-96
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
theinnkeeper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Delete Email and View Next - Older Message'''
</td>
<td>
1.4.5-78
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
theinnkeeper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Delete From Notification'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘eMail-Compose-AskToSend'''
</td>
<td>
1.4.5-58
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Fritz Amtmann
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Email Mega Mix'''
</td>
<td>
1.4.5-100
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Email Save Confirmation'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Enable Landscape Email'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
user , SirWill, dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hold Tap Context Menu'''
</td>
<td>
1.4.5-96
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
n1ce
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Launch Calendar from invite email'''
</td>
<td>
1.4.5-77
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ahub
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Mimic Outlook Formating on Email Replies'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jonolee
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Mojo ==

<table border="1">

<tr>
<td>
‘‘‘Virtual Keyboard'''
</td>
<td>
1.4.5-10
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Eric J Gaudet
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Unavailable ==

<table border="1">

<tr>
<td>
‘‘‘Delete Email and View Next - Newer Message'''
</td>
<td>
1.4.5-0
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
theinnkeeper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>
</body>
</html>

WebOS 2.0 Patch Status Project

2010-11-21T05:09:07Z

Rboatright: t7

With the release of the webOS 2.0 doctor and the webOS 2.0 SDK anyone can help us ensure that patches come through the forthcoming announced 2.0 update for all phones. Please help us by testing each of the patches below on webOS 2.0. If it just works, please edit that section and mark it as working If it does not work, please make a note about what is wrong. If you fixed it, please upload the fixed patch to _________________________ and mark it as fixed here along with your name and contact information. If you have determined that this patch is deprecated in 2.0, please note that and provide an explanation as to why. Thanks for all your help.

'''Status'''

Unverified: 146
Working: 0
Deprecated: 0
Fixed: 0
==================
Total: 146

== Section: Advanced ==

<table border="1">

<tr>
<td>
‘‘‘Advanced Configuration for System Preferences'''
</td>
<td>
1.4.5-89
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Advanced Configuration for System Preferences - WORLD'''
</td>
<td>
1.4.5-89
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: App Catalog ==

<table border="1">

<tr>
<td>
‘‘‘Hide App Vendors'''
</td>
<td>
1.4.5-28
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dsevil
</td>
</tr>
<tr>
<td></td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Show App Details'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Show Download Count'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Author: Brian Jost, Maintainer: dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: App Launcher ==

<table border="1">

<tr>
<td>
‘‘‘4x4 Icons v1'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘4x4 Icons v2'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
PuffTheMagic, dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘4x4 Icons v3'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
onlinespending
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘4x4 icons v4 No Arrows Plus More'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cwgtex
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘4x4 Icons v5'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cwgtex
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘5x4 Icons v1'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Mitchell , dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘5x4 Icons v2'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
flare576, dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘5x5 Icons v1'''
</td>
<td>
1.4.5-14
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
StoneRyno
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Advanced Configuration for App Launcher'''
</td>
<td>
1.4.5-73
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Advanced Options in Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Black Font in Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
2sslow
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Enable Add/Delete Pages'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Rod Whitby
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Fully Transparent Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mhous33
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Gesture Tap for Info and Delete'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Glass Effect'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
SqyArc
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide Amazon MP3 App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cryptk (Chris Jowett) , v3ritas (Sean McAd
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide Musicplayer App'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, noir
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide Nascar App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, noir, cryptk (Chris Jowett), v3ritas
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide NFL App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cryptk, noir, v3ritas
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide Quick Launch Bar'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide Quick Launch Bar in Launcher Only'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide Quick Launch Bar in Launcher Remix'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide Sprint Navigation App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
v3ritas , opacityzero
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hide YouTube App'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
veritas06 (Sean McAdam)
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Launcher Auto-Popup'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Launcher Page Selection Tabs'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lmorchard
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Lite List Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Owen Bickford
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Named Pages in the Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lmorchard
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘No Arrows or Fade Bar'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cwgtex
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Remove Icon Titles'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Abyssul
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Reset Scroll Position'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Reset to First Page'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Reset to Middle Page'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Scrim System Screens'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Warlord9159
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Show FirstUse App'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jack87
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Unhide Dev Mode Icon'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jauder Ho
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Wrap Pages'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr , dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Browser ==

<table border="1">

<tr>
<td>
‘‘‘Add Open URL Menu Option'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add Option to Send Link Message'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add Shortcut Keys'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add To Spare Time'''
</td>
<td>
1.4.5-70
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Darrin Holst
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Allow Browser in Low Mem'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
diomark , dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Auto Hide All Icons After Page Load'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Bad Kitty Super Mix'''
</td>
<td>
1.4.5-98
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Bookmarks List Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Bookmarks Tile Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Browser Scrollbar'''
</td>
<td>
1.4.5-90
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
veerar
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Change Number of Bookmarks on Startpage'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jmartino2011
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Disable Landscape Gesture Scroll'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Fullscreen Mode Browser'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Gesture Click Open In New Card'''
</td>
<td>
1.4.5-26
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
bsiegel
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘GestureClick Context Menu'''
</td>
<td>
1.4.5-26
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Fritzens
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hold Tap Context Menu'''
</td>
<td>
1.4.5-96
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
n1ce
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Mega Mix'''
</td>
<td>
1.4.5-102
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Multi Mod'''
</td>
<td>
1.4.5-36
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406 , daventx, Mark Klein, drnull
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Neato that URL'''
</td>
<td>
1.4.5-101
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘New Card Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘No Auto Refresh After Idle'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Raise Image Resolution Limit'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
edit_text
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Send to Relego'''
</td>
<td>
1.4.5-35
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
spdsktr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Shake to Reload'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Share Image Message Option'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Slider Blocks Orientation Change'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
KeyToss
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Spaz Beta Super Mix'''
</td>
<td>
1.4.5-99
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Spaz Super Mix'''
</td>
<td>
1.4.5-99
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Swipe History Auto Confirm'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, Wtgreen
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Twee Super Mix'''
</td>
<td>
1.4.5-98
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet URL and Title via Bad Kitty'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet URL and Title via Spaz'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet URL and Title via Twee'''
</td>
<td>
1.4.5-78
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet via Bad Kitty and Add to Relego'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet via Bad Kitty and Add to Spare Time'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet via Spaz and Add to Relego'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet via Spaz and Add to Spare Time'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet via Twee and Add to Relego'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Tweet via Twee and Add to Spare Time'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘URL Shorten in Browser'''
</td>
<td>
1.4.5-97
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Thomas Coe , Jeremy Thomas
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Calculator ==

<table border="1">

<tr>
<td>
‘‘‘Enable Vibration'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dallashigh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Calendar ==

<table border="1">

<tr>
<td>
‘‘‘15 Minute Intervals Only'''
</td>
<td>
1.4.5-84
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Chris Mann
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add additional default event length times'''
</td>
<td>
1.4.5-22
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
aric
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add One Minute Interval'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
aric
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘All-Day Events in Month View'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
daventx, d2globalinc, Hopspitfire
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Bridge Call Dialer Calendar Launcher'''
</td>
<td>
1.4.5-78
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ahub-dev
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Create Birthday Events'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
MetaView
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Default to Month View'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
matthewn
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Default to Week View'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
matthewn
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Disable Compressed View'''
</td>
<td>
1.4.5-80
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CRaiaSoftware
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Edit Item as New'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lexb
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Full Day View Calendar'''
</td>
<td>
1.4.5-30
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Lawren Quigley-Jones
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘More Reminder Alarm Times'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, wtgreen
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘New Event Icons and Shortcuts'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘No Snooze for Banner'''
</td>
<td>
1.4.5-21
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CRaia Software
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Notification Repeat'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Notification Repeat German Localisation'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sockenfresser
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Reminder Times Patch v2'''
</td>
<td>
1.4.5-18
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
4wheels
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Snooze Alternate Behavior'''
</td>
<td>
1.4.5-21
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CRaia Software
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Snooze Duration Selection'''
</td>
<td>
1.4.5-34
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘UberCalendar'''
</td>
<td>
1.4.5-75
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
MetaView
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘UberCalendar Multilingual Localization'''
</td>
<td>
1.4.5-101
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Kratus
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Wrap Location Field'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lordbah
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Camera ==

<table border="1">

<tr>
<td>
‘‘‘Capture With All Keys'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Capture with Volume Keys'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
tk102
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Improved Photo Naming CIMG'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Improved Photo Naming PIXI'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Improved Photo Naming PRE'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Launch Camera when Unlocked in Landscape'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Mijoro
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Simple Shutter Sound Off'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid, jhoff80
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Video Camera Flashlight'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Clock ==

<table border="1">

<tr>
<td>
‘‘‘Add Space Between Snooze and Dismiss'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr , dBsooner
</td>
</tr>
<tr>
<td></td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Alarm Daily Options'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
romanodog
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Lock Alarm and Clock to portrait'''
</td>
<td>
1.4.5-90
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Warlord9159
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘More Default Snooze Times'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Open to Alarm List'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
akamil
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Enable Hidden Clock'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
frankos72
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Contacts ==

<table border="1">

<tr>
<td>
‘‘‘Add Sync Now'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Additional Contact Labels'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Additional Speed Dial Keys'''
</td>
<td>
1.4.5-22
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CraiaSoftware
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘GSM-display-phone-numbers-as-synced'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
DIck99999
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Per-Contact Call Rejection'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
JackieRipper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Scrim Contacts'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mracer29
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Send All Contacts via Email'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
bsiegel
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Swipe to Delete'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Email ==

<table border="1">

<tr>
<td>
‘‘‘Actual Words Instead Of Icons'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add Move and Mark Unread Buttons'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Chris Mann
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add Move to Folder Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Add Priority Discard Btns'''
</td>
<td>
1.4.5-88
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Additional Days for Syncing Mail'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Confirm Delete'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jhoff80
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Delete Email and View Next - Deluxe'''
</td>
<td>
1.4.5-96
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
theinnkeeper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Delete Email and View Next - Older Message'''
</td>
<td>
1.4.5-78
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
theinnkeeper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Delete From Notification'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘eMail-Compose-AskToSend'''
</td>
<td>
1.4.5-58
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Fritz Amtmann
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Email Mega Mix'''
</td>
<td>
1.4.5-100
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Email Save Confirmation'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Enable Landscape Email'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
user , SirWill, dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Hold Tap Context Menu'''
</td>
<td>
1.4.5-96
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
n1ce
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Launch Calendar from invite email'''
</td>
<td>
1.4.5-77
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ahub
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>

<tr>
<td>
‘‘‘Mimic Outlook Formating on Email Replies'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jonolee
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Mojo ==

<table border="1">

<tr>
<td>
‘‘‘Virtual Keyboard'''
</td>
<td>
1.4.5-10
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Eric J Gaudet
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Unavailable ==

<table border="1">

<tr>
<td>
‘‘‘Delete Email and View Next - Newer Message'''
</td>
<td>
1.4.5-0
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
theinnkeeper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>
</body>
</html>

WebOS 2.0 Patch Status Project

2010-11-20T17:33:13Z

Rboatright: t7

With the release of the webOS 2.0 doctor and the webOS 2.0 SDK anyone can help us ensure that patches come through the forthcoming announced 2.0 update for all phones. Please help us by testing each of the patches below on webOS 2.0. If it just works, please edit that section and mark it as working If it does not work, please make a note about what is wrong. If you fixed it, please upload the fixed patch to _________________________ and mark it as fixed here along with your name and contact information. If you have determined that this patch is deprecated in 2.0, please note that and provide an explanation as to why. Thanks for all your help.

'''Status'''

Unverified: 146
Working: 0
Deprecated: 0
Fixed: 0
==================
Total: 146

== Section: Advanced ==

<table border="1">
<tr>
<td>
'''Advanced Configuration for System Preferences'''
</td>
<td>
1.4.5-89
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Advanced Configuration for System Preferences - WORLD'''
</td>
<td>
1.4.5-89
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: App Catalog ==

<table border="1">
<tr>
<td>
'''Hide App Vendors'''
</td>
<td>
1.4.5-28
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dsevil
</td>
</tr>
<tr>
<td></td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Show App Details'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Show Download Count'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Author: Brian Jost, Maintainer: dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: App Launcher ==

<table border="1">
<tr>
<td>
'''4x4 Icons v1'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''4x4 Icons v2'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
PuffTheMagic, dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''4x4 Icons v3'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
onlinespending
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''4x4 icons v4 No Arrows Plus More'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cwgtex
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''4x4 Icons v5'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cwgtex
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''5x4 Icons v1'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Mitchell , dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''5x4 Icons v2'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
flare576, dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''5x5 Icons v1'''
</td>
<td>
1.4.5-14
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
StoneRyno
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Advanced Configuration for App Launcher'''
</td>
<td>
1.4.5-73
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Advanced Options in Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Black Font in Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
2sslow
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Enable Add/Delete Pages'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Rod Whitby
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Fully Transparent Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mhous33
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Gesture Tap for Info and Delete'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Glass Effect'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
SqyArc
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Hide Amazon MP3 App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cryptk (Chris Jowett) , v3ritas (Sean McAd
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Hide Musicplayer App'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, noir
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Hide Nascar App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, noir, cryptk (Chris Jowett), v3ritas
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Hide NFL App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cryptk, noir, v3ritas
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Hide Quick Launch Bar'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Hide Quick Launch Bar in Launcher Only'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Hide Quick Launch Bar in Launcher Remix'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sconix
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Hide Sprint Navigation App'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
v3ritas , opacityzero
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Hide YouTube App'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
veritas06 (Sean McAdam)
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Launcher Auto-Popup'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Launcher Page Selection Tabs'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lmorchard
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Lite List Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Owen Bickford
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Named Pages in the Launcher'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lmorchard
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''No Arrows or Fade Bar'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
cwgtex
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Remove Icon Titles'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Abyssul
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Reset Scroll Position'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Reset to First Page'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Reset to Middle Page'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Scrim System Screens'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Warlord9159
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Show FirstUse App'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jack87
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Unhide Dev Mode Icon'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jauder Ho
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Wrap Pages'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr , dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Browser ==

<table border="1">
<tr>
<td>
'''Add Open URL Menu Option'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Add Option to Send Link Message'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Add Shortcut Keys'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Add To Spare Time'''
</td>
<td>
1.4.5-70
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Darrin Holst
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Allow Browser in Low Mem'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
diomark , dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Auto Hide All Icons After Page Load'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Bad Kitty Super Mix'''
</td>
<td>
1.4.5-98
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Bookmarks List Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Bookmarks Tile Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Browser Scrollbar'''
</td>
<td>
1.4.5-90
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
veerar
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Change Number of Bookmarks on Startpage'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jmartino2011
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Disable Landscape Gesture Scroll'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Fullscreen Mode Browser'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Gesture Click Open In New Card'''
</td>
<td>
1.4.5-26
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
bsiegel
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''GestureClick Context Menu'''
</td>
<td>
1.4.5-26
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Fritzens
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Hold Tap Context Menu'''
</td>
<td>
1.4.5-96
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
n1ce
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Mega Mix'''
</td>
<td>
1.4.5-102
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Multi Mod'''
</td>
<td>
1.4.5-36
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406 , daventx, Mark Klein, drnull
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Neato that URL'''
</td>
<td>
1.4.5-101
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''New Card Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''No Auto Refresh After Idle'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Raise Image Resolution Limit'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
edit_text
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Send to Relego'''
</td>
<td>
1.4.5-35
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
spdsktr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Shake to Reload'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Share Image Message Option'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Slider Blocks Orientation Change'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
KeyToss
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Spaz Beta Super Mix'''
</td>
<td>
1.4.5-99
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Spaz Super Mix'''
</td>
<td>
1.4.5-99
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Swipe History Auto Confirm'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, Wtgreen
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Twee Super Mix'''
</td>
<td>
1.4.5-98
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ThomasCoe
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Tweet URL and Title via Bad Kitty'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Tweet URL and Title via Spaz'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Tweet URL and Title via Twee'''
</td>
<td>
1.4.5-78
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Tweet via Bad Kitty and Add to Relego'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Tweet via Bad Kitty and Add to Spare Time'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Tweet via Spaz and Add to Relego'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Tweet via Spaz and Add to Spare Time'''
</td>
<td>
1.4.5-79
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Tweet via Twee and Add to Relego'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Tweet via Twee and Add to Spare Time'''
</td>
<td>
1.4.5-76
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Ben Fysh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''URL Shorten in Browser'''
</td>
<td>
1.4.5-97
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Thomas Coe , Jeremy Thomas
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Calculator ==

<table border="1">
<tr>
<td>
'''Enable Vibration'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dallashigh
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Calendar ==

<table border="1">
<tr>
<td>
'''15 Minute Intervals Only'''
</td>
<td>
1.4.5-84
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Chris Mann
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Add additional default event length times'''
</td>
<td>
1.4.5-22
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
aric
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Add One Minute Interval'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
aric
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''All-Day Events in Month View'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
daventx, d2globalinc, Hopspitfire
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Bridge Call Dialer Calendar Launcher'''
</td>
<td>
1.4.5-78
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ahub-dev
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Create Birthday Events'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
MetaView
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Default to Month View'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
matthewn
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Default to Week View'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
matthewn
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Disable Compressed View'''
</td>
<td>
1.4.5-80
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CRaiaSoftware
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Edit Item as New'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lexb
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Full Day View Calendar'''
</td>
<td>
1.4.5-30
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Lawren Quigley-Jones
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''More Reminder Alarm Times'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
dBsooner, wtgreen
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''New Event Icons and Shortcuts'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''No Snooze for Banner'''
</td>
<td>
1.4.5-21
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CRaia Software
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Notification Repeat'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Notification Repeat German Localisation'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
sockenfresser
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Reminder Times Patch v2'''
</td>
<td>
1.4.5-18
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
4wheels
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Snooze Alternate Behavior'''
</td>
<td>
1.4.5-21
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CRaia Software
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Snooze Duration Selection'''
</td>
<td>
1.4.5-34
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''UberCalendar'''
</td>
<td>
1.4.5-75
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
MetaView
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''UberCalendar Multilingual Localization'''
</td>
<td>
1.4.5-101
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Kratus
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Wrap Location Field'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lordbah
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Camera ==

<table border="1">
<tr>
<td>
'''Capture With All Keys'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Capture with Volume Keys'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
tk102
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Improved Photo Naming CIMG'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Improved Photo Naming PIXI'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Improved Photo Naming PRE'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Launch Camera when Unlocked in Landscape'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Mijoro
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Simple Shutter Sound Off'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid, jhoff80
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Video Camera Flashlight'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Clock ==

<table border="1">
<tr>
<td>
'''Add Space Between Snooze and Dismiss'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr , dBsooner
</td>
</tr>
<tr>
<td></td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Alarm Daily Options'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
romanodog
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Lock Alarm and Clock to portrait'''
</td>
<td>
1.4.5-90
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Warlord9159
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''More Default Snooze Times'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Open to Alarm List'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
akamil
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Enable Hidden Clock'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
frankos72
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Contacts ==

<table border="1">
<tr>
<td>
'''Add Sync Now'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
xanthinealkaloid
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Additional Contact Labels'''
</td>
<td>
1.4.5-8
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Additional Speed Dial Keys'''
</td>
<td>
1.4.5-22
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
CraiaSoftware
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''GSM-display-phone-numbers-as-synced'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
DIck99999
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Per-Contact Call Rejection'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
JackieRipper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Scrim Contacts'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mracer29
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Send All Contacts via Email'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
bsiegel
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Swipe to Delete'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
IMGrant
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Email ==

<table border="1">
<tr>
<td>
'''Actual Words Instead Of Icons'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
fritos1406
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Add Move and Mark Unread Buttons'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Chris Mann
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Add Move to Folder Button'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Jason Robitaille
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Add Priority Discard Btns'''
</td>
<td>
1.4.5-88
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Additional Days for Syncing Mail'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Confirm Delete'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jhoff80
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Delete Email and View Next - Deluxe'''
</td>
<td>
1.4.5-96
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
theinnkeeper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Delete Email and View Next - Older Message'''
</td>
<td>
1.4.5-78
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
theinnkeeper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Delete From Notification'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
lclarkjr
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''eMail-Compose-AskToSend'''
</td>
<td>
1.4.5-58
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Fritz Amtmann
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Email Mega Mix'''
</td>
<td>
1.4.5-100
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Email Save Confirmation'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
mamouton
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Enable Landscape Email'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
user , SirWill, dBsooner
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Hold Tap Context Menu'''
</td>
<td>
1.4.5-96
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
n1ce
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Launch Calendar from invite email'''
</td>
<td>
1.4.5-77
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
ahub
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
<tr>
<td>
'''Mimic Outlook Formating on Email Replies'''
</td>
<td>
1.4.5-1
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
jonolee
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Mojo ==

<table border="1">
<tr>
<td>
'''Virtual Keyboard'''
</td>
<td>
1.4.5-10
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
Eric J Gaudet
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>

== Section: Unavailable ==

<table border="1">
<tr>
<td>
'''Delete Email and View Next - Newer Message'''
</td>
<td>
1.4.5-0
</td>
<td>
Status:'''UNTESTED'''
</td>
<td>
theinnkeeper
</td>
</tr>
<tr>
<td colspan="4">
NOTES:
</td>
</tr>
</table>
</body>
</html>