Application:AccelService
AccelService - Version: Pre-Alpha 0.0.1
(5 Aug 2009) (first public release)
Summary
Status
This is early-alpha software.
Repository
AccelService is housed in the Applications section of the Webos-internals repository at Gitorious. http://gitorious.org/webos-internals.
Source code for the example Mojo app can be browsed at http://gitorious.org/webos-internals/applications/trees/master/org.webosinternals.accelexample
Source code for the service can be browsed at http://gitorious.org/webos-internals/applications/trees/master/AcceleromterService
License
Please be aware that org.webosinternals.accelservice and org.webosinternals.accelexample are licensed under the GPLv2.
They cannot be used by a closed source application. If you want to use them in a non-GPLv2 but otherwise open source application, please contact the authors.
Operating notes
Recent enhancements
Known bugs
Installation
Do not stray from or vary these instructions. If you don't do it all, in precisely the right order, with zero mistakes, it's not going to work. Copy & Paste will be your friend.
You need to be logged in as root with a writeable filesystem. Instructions for both those things can be found elsewhere on this wiki.
The first time you install accelservice you must do all these steps:
<source lang="text"> mkdir -p /var/etc/ipkg/ ln -s /etc/ipkg/arch.conf /var/etc/ipkg/ echo "src/gz all http://ipkg.preware.org/feeds/preware/all" > /var/etc/ipkg/preware.conf </source>
If you are on the Pre, type:
<source lang="text"> echo "src/gz armv7 http://ipkg.preware.org/feeds/preware/armv7" >> /var/etc/ipkg/preware.conf </source>
If you are on the Emulator, type:
<source lang="text"> echo "src/gz i686 http://ipkg.preware.org/feeds/preware/i686" >> /var/etc/ipkg/preware.conf </source>
Then type:
<source lang="text"> /usr/bin/ipkg -o /var update /usr/bin/ipkg -o /var install org.webosinternals.accelservice /bin/sh /var/usr/lib/ipkg/info/org.webosinternals.accelservice.postinst /usr/bin/ipkg -o /var install org.webosinternals.accelexample </source>
Then restart the GUI service to pick up the new service:
<source lang="text"> initctl stop LunaSysMgr && initctl start LunaSysMgr </source>
If the above fails to show the results you're expecting, reboot the device.
Updating
After your first install, only the following is required to upgrade to a new version.
You need to be logged in as root with a writeable filesystem. Instructions for both those things can be found elsewhere on this wiki.
From a shell:
<source lang="text"> /usr/bin/ipkg -o /var update /usr/bin/ipkg -o /var upgrade reboot </source>
Other PreWare Applications
You need to be logged in as root with a writeable filesystem. Instructions for both those things can be found elsewhere on this wiki.
Note that you can use the same commands to install other applications from PreWare:
<source lang="text"> /usr/bin/ipkg -o /var update /usr/bin/ipkg -o /var list /usr/bin/ipkg -o /var install <package> # choose a package from the list /usr/bin/ipkg -o /var remove <package> </source>
Removal
You need to be logged in as root with a writeable filesystem. Instructions for both those things can be found elsewhere on this wiki.
<source lang="text"> /usr/bin/ipkg -o /var remove org.webosinternals.accelexample /usr/bin/ipkg -o /var remove org.webosinternals.accelservice </source>
Then restart the GUI service:
<source lang="text"> initctl stop LunaSysMgr && initctl start LunaSysMgr </source>
If the above fails to show the results you're expecting, reboot the device.