Difference between revisions of "Ip forward"

From WebOS Internals
Jump to navigation Jump to search
Line 31: Line 31:
 
stop PmNetConfigManager
 
stop PmNetConfigManager
 
start PmNetConfigManager
 
start PmNetConfigManager
 +
</pre>
 +
 +
Another way to solve this problem is to make /proc/sys/net/ipv4/ip_forward innaccessable.  As PuffTheMagic_ put it:
 +
<pre>
 +
&lt;PuffTheMagic_gt; smoofra: mount -o bind /dev/null over ip_forward
 +
&lt;PuffTheMagic_gt; then mount proc in a new directory
 +
&lt;PuffTheMagic_gt; and set it to 1 from that new dir
 +
&lt;PuffTheMagic_gt; ;)
 
</pre>
 
</pre>

Revision as of 05:26, 2 March 2010

You might have noticed that /proc/sys/net/ipv4/ip_forward keeps getting reset to 0.

There are three places I've found that cause this to happen. First is /etc/network/options. Go in there and change the line

ip_forward=no

to

ip_forward=yes

Next is /etc/pmnetconfig/if-down. Comment out the lines

   ${LOG} "${ECHO} 0 >/proc/sys/net/ipv4/ip_forward"
   ${ECHO} 0 >/proc/sys/net/ipv4/ip_forward

Last and not least, is the binary /usr/bin/PmNetConfigManager. First, make a fake place for it to write to

mount -o remount,rw / 
mkdir-p /media/cryptofs/fake/sys/net/ipv4
ln -s /media/cryptofs/fake /fake
echo 0 >/fake/sys/net/ipv4/ip_forward
mount -o remount,ro /

Next, patch /usr/bin/PmNetConfigManager so it writes to /fake/sys/net/ipv4/ip_forward instead of /proc/sys/net/ipv4/ip_forward. Just open it up in a hex editor, find that path, and change "proc" to "fake". Make sure you only change those four bytes. You should probably also make sure you have a backup of the original binary. After you replace PmNetConfigManager, restart it.

stop PmNetConfigManager
start PmNetConfigManager

Another way to solve this problem is to make /proc/sys/net/ipv4/ip_forward innaccessable. As PuffTheMagic_ put it:

<PuffTheMagic_gt; smoofra: mount -o bind /dev/null over ip_forward
<PuffTheMagic_gt; then mount proc in a new directory
<PuffTheMagic_gt; and set it to 1 from that new dir
<PuffTheMagic_gt; ;)