Search results
Jump to navigation
Jump to search
- ...BF - no button. i.e. there is button and if you press it it will type but it is invisible (try typing to the right of 0 or to the left of 1 to check wha If the greatest byte (the most right one in LE) is 01, then it is not symbol but the text from some static variable defined in the file (l29 KB (4,411 words) - 10:30, 9 April 2012
- ...<code><nowiki>~~~~</nowiki></code>. If your suggestion reaches consensus, it may be implemented in a future version of the application. ...ranslations of this page as you see fit, don't wait for someone else to do it.[[User:RodWhitby|RodWhitby]] 11:32, 19 May 2010 (UTC)13 KB (2,163 words) - 20:53, 5 April 2011
- ...Ok, then Pre-pare the app by Pre-fitting it to the new mojo environment it will be running in. ...xclusive use of Canvas, this app is a very good candidate to be ported, as it can be ported more-or-less directly, with a small amount of development tim12 KB (2,100 words) - 00:18, 3 November 2010
- ...or later to function. Do not try to install it on earlier webOS versions, it will not work.''' ...ent process supported by a team of world-class WebOS Internals developers, it will continue to get better much faster than any other package management a26 KB (3,857 words) - 21:37, 5 October 2017
- Navit is an open source (GPL) car navigation software for Linux systems. It will display your position on a map (in bird-view mode or as a 3D "visualiz # Try it out!24 KB (4,090 words) - 17:36, 17 April 2014
- .... Follow this guideline to overclock, patch, hack and modify WebOS so that it will run as fast and as smoothly as possible with WebOS 2.1. ...2 years old now. You simply can't get something from nothing. These steps help greatly, but do not expect a miracle.14 KB (2,400 words) - 19:05, 22 July 2011
- ...you'll have to modify an existing other carrier's data into your carrier. It requires both a modified carrier DB entry and one or more modified data ent ...t, you have to modify the data section of your carrier. Probably modifying it by manual settings under phone preferences is easiest, for some nice screen16 KB (2,648 words) - 13:33, 8 January 2011
- ...API to help deal with these limitations. This API spec will be in flux as it is discussed. *It must accept and return properly formatted JSON12 KB (1,853 words) - 09:42, 19 July 2011
- When the widk was developed, the Palm PDK didn't exist, and until Dec 2010, it was not possible to run the PDK in Linux. If you would like to run the off ...y'' urge the open-source homebrew community to standardize on this WIDK. It uses the same underlying technologies, and is entirely open.20 KB (2,952 words) - 19:45, 24 April 2015
- ...ecause its being used for other things). I tried to "Insert" shortcut, but it didn't do anything. - Tossing in another request to get a solution in for pasting: as it stands there is no way to get some symbols (specifically curly braces) into11 KB (1,811 words) - 16:07, 20 October 2010
- The following information will help you with installing the Tweaks application. In order for Tweaks to properly work, you will need to install it along with at least one patch that has tweaks support. Patches that have Tw11 KB (1,565 words) - 00:26, 26 October 2011
- If you like it please consider purchasing the app [http://developer.palm.com/appredirect/? To get VBA for Free: Install [[Preware]], and then launch it. Click on "Available Packages" then "Applications, or "Available Applicatio23 KB (3,161 words) - 16:55, 1 October 2010
- ...nd. It supports controlling even more system settings than MS 1.x with the help of the Advanced System Prefs patches for webOS 2.1. Mode Switcher 2 is fast The following information will help you install Mode Switcher.26 KB (3,954 words) - 17:28, 12 December 2011
- ...is operation has not been performed on a Pixi, and will not be the same as it has a different core. ...or will refuse to install. If you're in this situation you need to rebuild it. Here are a few of the minimal token sets to allow the doctor to start:10 KB (1,714 words) - 09:50, 15 April 2011
- ...vnah and UberKernel, it will be running at 600MHz. This is where you ramp it up to 800MHz. Select "800Mhz" in the "Set Speed" section and tap "Apply Se ...settings active. If you desire to change the amount of space reserved once it has been active you must turn compcache enabled to off and click apply. The16 KB (2,504 words) - 21:40, 7 August 2011
- ''The year is 2013. It's a post-webOS world.'' ''HP has sold off the webOS group, and the buyer has stripped it for the patents, and shut down all the infrastructure needed to support web7 KB (1,218 words) - 04:07, 20 October 2014
- Bootie is the stage3 bootloader of webOS devices. It is unpacked from the end of boot.bin, and loaded to **0x82000000** in memor The following is an example of using novaterm to run the bootie command "help":11 KB (1,286 words) - 15:15, 1 October 2011
- The rsync binary is part of Palm's original package, so it is possible to make a wrap-around gui-based ipk for users who do not want a 1. We will set up the rsync daemon on the Palm Pre and make it acccessible by the host.10 KB (1,611 words) - 19:29, 21 July 2011
- |description=Interested in the inner workings of the device. Check it out. |description=Need help with something? Looking for a tutorial? Find it here.5 KB (602 words) - 21:33, 15 June 2016
- ...'''R'''oaming '''L'''ist). This guide aids in restoring that capability. It requires that novacomd be installed and running on a computer because the s If you restore someone else's files to your phone, it will become THEIR phone and no longer YOURS.8 KB (1,053 words) - 13:15, 28 April 2011