From WebOS Internals
Hamachi VPN for Palm Pre
This document assumes you're familiar with the Hamachi VPN, specifically the linux version. It is geared towards a person wanting to "get it working" on the Pre. If you're not familiar, there are endless Googlable web pages that describe running Hamachi on desktop linux systems you can use for reference.
Make the filesystem writable:
mount -o remount,rw /
Download the hamachi binary to your pre via wget:
- Note: It is recommended that you use the nokia build, because it included the install script. Whereas the direct hamachi link would require that make be installed.
cd /opt/share wget http://files.hamachi.cc/linux/nokia-770/hamachi-0.9.9.9-20-lnx-n770.tar.gz
Unpack the archive:
tar zxvf hamachi-0.9.9.9-20-lnx-n770.tar.gz cd hamachi-n770-0.9.9.9-20
Hamachi depends on libcrypto.so.0.9.7. The Palm Pre has libcrypto.so.0.9.8 installed. I made a symlink, and it worked. So...
ln -s /usr/lib/libcrypto.so.0.9.8 /usr/lib/libcrypto.so.0.9.7
Edit the "install" script using your favorite editor (like vi) to change the installation locations. Also fix line 7 or you'll get an error.
I changed it to:
HAMACHI_DST=/opt/bin TUNCFG_DST=/opt/sbin echo echo Copying hamachi into $HAMACHI_DST ..
Then follow the instructions in the README under Quick Start, but basically:
./install /opt/sbin/tuncfg hamachi-init hamachi start hamachi login hamachi set-nick <your nickname> hamachi join <network> hamachi go-online
Adding your Pre to your Windows hamachiVPN.
If you want to join a group made on the hamachi.cc (the official logmein page) webpage you need the group ID (joining by group name fails). On the logmein website click on My Computers and on the left side click on the Network tab. You can create a new network here under "add network" To get an ID for an existing network click on "edit" on the right side of the group name. This will bring up the edit page under the ID is the 9 digit group ID (XXX-XXX-XXX) with dashes these are also part of the group ID. To join this network on your pre type "hamachi join (9 digit ID don't forget the dashes) (password)".
If you use Hamachi to connect to web services running on your machines at home or elsewhere, you might make your life easier by adding some entries to the /etc/hosts file. Then you can access your servers by name instead of having to use the Hamachi 5.x.x.x IP addresses.
A simple sample entry in /etc/hosts which would allow you to access your server "beaker" at 22.214.171.124 would be: (Add your servers below the "castle" line.)
127.0.0.1 localhost.localdomain localhost 127.0.0.1 castle 126.96.36.199 beaker
When done, make the filesystem read-only again:
mount -o remount,ro /
When you've got hamachi up, you can try pinging one of your servers.
root@castle:/var/home/root# ping beaker PING beaker (188.8.131.52): 56 data bytes 64 bytes from 184.108.40.206: seq=0 ttl=128 time=5.493 ms 64 bytes from 220.127.116.11: seq=1 ttl=128 time=32.257 ms 64 bytes from 18.104.22.168: seq=2 ttl=128 time=56.976 ms 64 bytes from 22.214.171.124: seq=3 ttl=128 time=74.249 ms
Sleep/Wake and Battery Impact
On first testing:
- When the device went to sleep, the VPN went down.
- When the device woke up, the VPN came back up and was pingable again.
This morning, while at my workstation, and with the Pre idle in my pocket, I noticed my Pre was available/pingable on Hamachi. I am not totally sure of what the long-term battery impact might be of running Hamachi on the Pre. I'm not yet sure if it keeps the device "awake" all the time, which clearly would drain the battery. I have push GMail IMAP going, so I assume there is some kind of connection either being periodically established or constantly maintained. But I don't know enough about the networking aspects to determine at this time whether running Hamachi all the time will negatively impact the battery. Feel free to message me if you learn anything.
- With Hamachi running I would achieve 12 hours of battery life on my pre
- Without Hamachi running after 12 hours I am sitting at 60% battery life
So to conclude running Hamachi all the time significantly decreases battery life in my situation. I personally would not recommend running Hamachi all the the time.
This script will start Hamachi up after a reboot.
Place the following script in /etc/event.d/hamachi
description "Hamachi VPN for WebOS" version 1.0 # don't start until the WebOS finishes it's normal boot # that way no delay is added to the GUI startup start on stopped finish stop on runlevel [!2] console output script /opt/bin/hamachi -c /var/home/root/.hamachi start 2>&1 /var/home/root/hamachi.log end script pre-start script /opt/sbin/tuncfg end script