Solution to App Catalog Installation Limit
- 1 Overview
- 2 Solution (symbolic link method)
- 3 Prepping for webOS 1.3.5 Update
- 4 Precautions
- 5 Commands
- 6 Hidden Commands
- 7 Contingency Plan
- 8 Proposal to Dev Community
- 9 Benefits over other methods
- 10 Risks, Issues, Dependencies
- 11 Confirmed Apps
- 12 Discuss
- 13 Source
- 14 Credits
The 'mvapp' method is a Linux command that allows moving your Pre apps and email to the (much larger) media drive by using symbolic links. This will save space on internal system storage (/var) and allow more App Catalog apps to be installed, up to media drive limit (gigabytes) rather than the 64MB limit.
This method involves creating a (hidden) directory /media/internal/.apps, moving selected applications to the newly created directory, and then creating a symbolic link in the /var/usr/palm/applications directory pointing to the new location. mvapp v0.3.0 and higher now also moves email and attachments to /media/internal/.data. This frees up the disk space from the relatively limited internal system volume (/var) to the much larger media drive (/media/internal). The 'mvapp' command (available on PreWare) will move the files and create the appropriate link.
Now on PreWare in the Linux Applications category. In PreWare Preferences, need to have 'show available types' turned on.
Quick Start Guide - Launch PreWare - In PreWare Preferences, need to have 'Show All Package Types' turned on - Install 'mvapp' from PreWare in the Available Other -> Linux Application category - Install Terminal app from PreWare (if not already installed) - Open Terminal from Launcher, then type... mvapp doctor mvapp bulkmv
Prepping for webOS 1.3.5 Update
There's a pretty good chance the next webOS update will address the app limit storage issues, which will mean 'mvapp' will likely not be needed from that point on.
Best Case Scenario: There is the possibility that mvapp will be compatible with 1.3.5. It may be able to maintain the links with the new app storage method. If the case, you can do nothing or 'mvapp restoreall' after the update. I'll likely able to answer this before 1.3.5 is released.
Pre Update Option: In preparation, just before upgrading to webOS 1.3.5, you can perform a 'mvapp restoreall' to restore apps and 'mvapp unlinkemail' to restore email back to the /var location.
However if you have accumulated dozens of apps and/or a large amount of email, you may not be able to restore fully and have enough room for the upgrade. You may need to do some cleanup by removing apps that you do not use. After the update, you should be able to reinstall your deleted apps. If willing, you may also consider deleting your email accounts and reinstalling before performing 'mvapp unlinkemail'. Though I suspect that linked email will be compatible with 1.3.5.
Post Update Option: I'm planning to have a secondary recovery option for those who perform an OS update before getting a chance to restore mvapp links, but it won't be released until the day of the update. Hopefully 1.3.5 will be compatible with existing mvapp links and no preparation will be needed.
Follow this section for more details.
So far, no one has reported issues with apps or email due to linking. These are best practices to avoid issues.
- Version 0.3.0 and higher now can move email and attachments to media drive. It is unknown how a future webOS release will deal with the storage issues. It's possible a future webOS release could break the email link to the media drive. While I'd likely have a new mvapp release out before next webOS release, losing email on the phone is a possibility and you may have to resetup email accounts. Moving email is not recommended if you rely on email for your job unless you don't mind possibly losing all email on the phone. Your email will still exist at the original source (gmail, yahoo, hotmail, etc), so linking email is not likely to have much of an impact for most of us.
- If Palm releases a new webOS that resolves the overall issue, you _may_ (but not likely) need to completely restore your apps back to /var before performing the upgrade - mvapp restoreall. For email - mvapp unlinkemail. If a future webOS update is applied before you get a chance to restore, it's possible it could break this method, so moving apps that store important information to you is not recommended. Since it would likely be a significant architectural change for Palm to fix this issue, storage issues may not be officially resolved until webOS 2.0, but who knows. webOS 1.3.1 does not have any issues with mvapp.
- This is a workaround script not approved by Palm. The usual disclaimers apply.
To run diagnostics on /var and get recommendations
m d m (includes media apps, slower)
This reports the usage of applications, email and attachments on /var. It also recommends actions based on the results.
To find the largest apps in /var/usr/palm/applications
The first number is size of app in KB, largest shown last. IE....
To move and link an app to /media
mvapp link domain.appname
m ln domain.appname
Example: mvapp link com.ulocate.app.where
The app should now work in the new location thanks to the link. Test each app to make sure it works before doing another.
Continue moving apps until it reports the 'var used' is below 100MB. If 'var used' is 95MB, you could add 5MB more apps.
To move and link many apps
This will show largest app first, ask if you want to move/link and then moves on to the next largest app. If you answer no to an app, it will skip to the next. Answer 'q' to quit. Is easiest to use this method directly on the phone using the Terminal app, available in Homebrew.
To search for apps by partial app name
This is an easier way to link/unlink/clean apps from the Terminal app. You only need to supply a partial app package name. It will show any matches then ask what you'd like to do with it.
To restore the app to original location and delete the link
mvapp unlink domain.appname
m ul domain.appname
The application will be moved back to the original directory. If you have issues with an app after unlinking, see the Contingency Plan section below.
To list apps that have been moved and linked...
This shows a list of apps that have been moved and linked to /media.
To restore all moved apps back to original location
This will restore ALL applications that have been moved/linked, back to the original location in /var. This may take several minutes to complete. It will show each application progress. Beware that if you have moved a very large number of apps over a period of time, they may not all fit on /var. You may need to remove some/many unused apps before restoring all.
To cleanup and remove directories and symlinks
mvapp clean domain.appname
m c domain.appname
If you have any issues, first attempt to remove the app from Launcher, the App Catalog or Homebrew app installer. It's very important you remove from the phone first before using the clean command. Then issue the 'clean' command to remove the applications directories at both locations and also the symlink. You can then reinstall the app from the App Catalog or any Homebrew App installer.
To move and link email and attachments
This will move all of your email from /var to /media/internal/.data/emails. This will close the email application so if you are writing a new email, be sure to send the email before using this commend. Also see the Precautions section above.
To restore and unlink email and attachments
This will restore all of your email from /media back to /var. This will close the email application so if you are writing a new email, be sure to send the email before using this commend.
These commands are not documented in the Usage display.
Checks if apps in /media have a link. If not, you have the option to remove the app from media, which is recommended. This can occur if the app was not fully removed when you removed from Launcher or homebrew installer.
Check if Fair Dinkum is installed
Checks if Fair Dinkum is/isn't installed and enabled. Also shows current version of PreWare and Package Manager Service installed.
Updates PreWare and Package Manager Services to most recent version. You need to confirm install of each by answering 'y' for yes.
Update Terminal App
Updates the Terminal app to most recent version. You should not run this within the Terminal app. Use it when accessing Linux through a computer.
To force tar restore
mvapp ftr domman.appname
This is a hidden function not shown in usage. It is for those who used an older version of mvapp and had tar backups. If you need to restore an app from tar, use this command. Or just remove the app from Launcher and reinstall if necessary.
To remove tar backups
This is a hidden function not shown in usage. Tar backups have been disabled by default since mvapp 0.2.4. Tar backup has been turned off because it wastes space on /media and has potential issues with restoring older versions of an app. Its purpose was to restore special file attributes not supported by FAT filesystem. The script no longer moves apps that FAT fs cannot support, so tar is no longer needed. If you no longer need old tar backups, use this command to remove the entire backup directory.
If you have problems with an application, follow these steps...
-- Close the application if open
-- mvapp unlink domain.appname
-- Try using the App
If the application still does now work correctly...
-- Remove the App using official methods (remove from Launcher or Homebrew installer)
-- mvapp clean domain.appname
-- Reinstall through the App Catalog or Homebrew installer app
If you have issues with email, follow these steps...
-- mvapp unlinkemail
Proposal to Dev Community
This is a formal proposal to the Dev Community suggesting that PreWare, WebOS Quick Install and other Pre installer apps provide an option to move any app in /var to the /media fs and create a link similar to the code above.
The Homebrew Community somewhat created part of the storage problem so needs to come up with their own solution. The symbolic link proponents propose that Homebrew apps be moved with a link to /media/internal by default and physically use /var only if needed (per conditions stated below). The developer would put a flag in the package (or some other method during submission) to state their app is able to run linked to /media or if it specifically needs to physically be on /var. Will propose additions to Packaging Standards to support /media links. The homebrew installer apps could then automatically do the move/link if the package is flagged for it.
Candidate apps for moving to /media
- apps that do not depend on file attributes not supported by FAT (such as sticky bit or internal links) - The script (post 0.2.0 now deals with this).
- apps that do not perform data operations to home app directory when device is USB mounted
Exceptions for maintaining apps on /var
- apps that depend on file attributes not supported by FAT - The script (post 0.2.0 now deals with this).
- apps that won't work well when device is USB mounted, such as performing data or DB operations in home app directory
(Please update with other known candidates/exceptions)
Benefits over other methods
Fair Dinkum method
Rod Whitby's FD method works up to a point but if /var usage is over 100MB, the FD method no longer works. The symlink method not only saves space on /var, it can reduce it significantly when many apps and email are moved to media drive.
One challenge with resizing /var is that it will still have a fixed static limit - how do you decide how much to increase it? Many will still probably hit the limit or waste space if setting too high. There is also the warning from Palm that resizing var may interfere with future updates. The link method allows to dynamically use the /media partition, so there is no need to set a specific size dedicated to apps. If the USB drive is filled, users can decide if they use the space for media or apps on the fly.
AppPath in /etc/luna.conf
I proposed a while back adding an AppPath to luna.conf to include apps stored on /media. Some apps would not work because some apparently reference /var. IE, the vampire/mafia/quest series could not access graphics. The symbolic link fixed this because apps think they are in /var.
Link/mount all of /var/usr/palm/applications/ to /media/internal
If some apps rely on file attributes this won't work since file attributes are lost when moved to FAT fs. While this is rare, it probably isn't wise to force all /var apps to /media. Selectively moving apps one at a time is less risky. Update: Have found that "PDF View" app does not allow to be linked, so it appears that selectively moving apps is necessary.
Creating a loopback filesystem to a virtual file located on /media/internal
This has been worked on here and still has potential. Unfortunately it locks out USB mount and media sync altogether. If a workaround can be found with low risk, this may be the most ideal solution.
Suggestion to Palm... consider virtually mounting /media so that both the kernel and USB can use /media simultaneously. This would allow the loopback fs to work and would probably also allow phone calls while USB mounted. This could become the strategic solution.
Risks, Issues, Dependencies
- Some file attributes of linux fs are not possible on FAT fs (USB drive). The 0.2.0 version (and higher) now deals with any apps that cannot copy attributes/permissions properly. The script will not move apps that have special attributes or conditions that FAT fs can't deal with. In general, this has been resolved. No known issues with apps since version 0.2.0 or later.
- Some apps may not behave well if USB drive is mounted to computer, though I've tested several that behaved fine. Linux type background services probably would not work well so probably should not be moved. Apps that do IO to the home directory of the app while USB mounted may have issues when located on /media. I'm not aware of any apps that write to their own home directory, so this may not be a risk in general, but is still a possibility. If you run into issues with an app, see the Contingency Plan.
Apps Confirmed Not to Work
com.palm.app.pdfviewer (script v0.2.0 and higher properly handles this, won't allow it to move)
Discuss in the Discussion tab or PreCentral...
The source has been moved to gitorious...
xorg - initially developed script and proposal. maintainer of this page. daventx - added unlink and clean functions, other suggestions<br> nt4cats - found Fair Dinkum breaks mvapp, gave solution to use explicit path. SirWill, hparsons, bclancy, navinag, dhcalva, chodaboy - testing, usable suggestions and feedback emoney22 - pointed out hidden directory in /media hides images from Photo app greg_roll - provided info to capture running apps rwhitby - setup webosinternals repository for homebrew distro And thanks to the many testers who gave feedback on the PreCentral thread.